Hub and Drum Assembly with 8 on 6-1/2 Bolt Pattern for Dexter 10,000 Pound Trailer Axle

Question

Question:

number on hub is 8-427 also says 4.88 pilot hole only my trailer is only 2 years old and I know the new ones come with a 4.77 pilot hole configuration. I need the hub with the 4.88 to match my wheels and the rest of my hubs

asked by: John S

1

Helpful Expert Reply:

The Dexter 8-427 hub is no longer available. Even looking through Dexter's site the only references to it are replacement bearings. You can use a wheel with a larger pilot hole as long as the wheel attaches to the hub using lug nuts and not bolts. Hub and drum assembly # 8-430-5UC3 uses lug nuts to secure the wheel to the hub and uses inner bearing 387A and outer bearing 25580.

expert reply by: Michael H

1

Answer 1

The Dexter Trailer Brake Assemblies 023-466-00 and 023-467-00 will cross-reference to our Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-458-459.

view full answer...

Answer 2

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 3

I'm not sure why they said those were your only options, but we do have the correct replacement oil seal for your Dexter 10k hub from 2006, and is the exact replacement for a National 370150BG: - Unitized Oil Seal #10-51 The #10-51 has an inner…

view full answer...

Answer 4

Hey Garrett! With a 387A outer bearing you may be able to use the #DX68QR you were looking at which uses the same 9-27 drum. Make sure the 387A was the outer, and not the inner bearing. Your inner bearing would be the 395S and then for the seal it is…

view full answer...

Answer 5

Hey Brad, thanks for reaching out. We should have a grease hub for you, but there is no way to use the trailer ID number or VIN to look up exactly what hubs you need. Trailer manufacturers just aren't that specific with their online literature,…

view full answer...

Answer 6

Hey Jordan! Yes, the Global Link Vise Lock #295-000024, Global Link RV Entry Door Locking Latch #295-000019, and Replacement Cam Lock Cylinder #295-000005 can all use the same key. Just make sure you choose the keyed alike option for each one before…

view full answer...

Answer 7

Hey Kyle! The Pacbrake Alpha HD Air Bag Suspension Kit #PB22RV installs in the same location as most fifth wheel and gooseneck brackets. I would expect to have to do some drilling to install these with your B&W Turnoverball. Instead, I recommend…

view full answer...

Answer 8

We sure do Jerry and welcome back! To replace the Replacement Dexter Versa-Flex Torsion Arm Kit item #DX24FT. This replacement arm is designed for a 3,700-lb Dexter Versa-Flex axle. It's going to replace the entire arm assembly and rotor hub. It…

view full answer...

Answer 9

The closest option we have in size to the High Pointe EM925RWW is the High Pointe Standard RV Microwave #HP59ZR. This microwave is 19-1/8" wide x 11-1/2" tall x 14-13/16" deep. The trim kit that comes with these units is approximately…

view full answer...

Hub and Drum Assembly with 8 on 6-1/2 Bolt Pattern for Dexter 10,000 Pound Trailer Axle

Product Page this Question was Asked From

Continue Researching