Replacement Recommendation for TDE 46210 Hub
Updated 09/08/2017 | Published 09/07/2017
Question:
I have these hubs on my boat trainer. Do you have these in stock? Assume the spindle make no difference.
asked by: Charlie C
0
Expert Reply:
We have just what you are looking for. I called my contact at TDE and asked about the hub you have on your boat trailer. They told me that it was a 5-stud idler hub for a 3,500-lb axle.
That means you need the part # AKIHUB-545-35-K. This is a fit for the standard spindle 3,500 lb dimension that your trailer.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Dexter E-Z Flex Suspension Equalizer for 2020 Nitro Boat Trailer
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: 57341
- Shop: Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle
- Shop: Replacement Inner Member for Dexter/Tie Down LP80, LP85 and LP8500 Brake Actuators
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Search Results: kodiak brake pads
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 10" Rotor - 5 on 4-1/2 - 3.5K
- Search Results: ufp brake pads
- Search Results: db~35
- Shop: Suspension Enhancement
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Shop: Trailer Hitch
- Search Results: 11422
- Search Results: gh~523
- Search Results: e98892
- Q&A: Replacement For TDE LP75 Disc Brake Actuator
- Q&A: Correct Replacement for TDE Trailer Idler Hub 46210
- Video: An In-Depth Look at the 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles
- Q&A: Distance From End of TruRyde #84 Spindle Stub to the Back of an Installed Hub
- Video: A Closer Look at the Dexter Disc Brake Assembly
- Video: What to Know About the Aluminum AM03 Series Matte Black Machined Trailer Wheel
- Video: An In-Depth Look at the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles
- Video: Kodiak Disc Brake Kit: The Breakdown
- Video: Feature Review Kodiak Disc Brakes
- Shop: Base Plate for Tow Bar