3" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter - Steel
(179 reviews)
Price: $65.98
In Stock
3" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter - Steel
Item # MA75VR
Retail:$69.33
Our Price: $65.98
You Save: 5%
Orders above $99 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (179)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
Marlboro Trailer Door Hinges - MA75VR
- Piano Hinge
- Continuous Hinge
- Greasable Pin
- Steel
- 72 Inch Long
- 3/8 Inch Diameter
- 3 Inch Wide
- Weld On
- Marlboro
Great for your heavy-duty utility trailer, this steel piano hinge provides uninterrupted support for your door or tailgate. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.
Features:
- Hinge provides sturdy, continuous support for the door or tailgate on your utility trailer
- Continuous design offers more support than smaller, individual hinges and reduces stress on heavier doors
- 270-Degree rotation for full opening and closing motion
- Weld-on or bolt-on installation
- Bolt-on installation requires drilling holes into hinge
- Steel construction is durable and long-lasting
- Made in the USA
Specs:
- Dimensions: 6' long x 3" wide
- Each side of the foldable hinge measures 1-1/2" wide
- Individual knuckle length: 2"
- Pin diameter: 3/8" (9.5 mm)
S12004872 Marlboro Piano Hinge - Door Hinge - Steel - 6' Long x 3" Wide - 9.5-mm Pin
Video of 3" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter - Steel
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Marlboro Trailer Door Hinges - Barrel Hinge - MA75VR
Hello, everybody, this is Jeff at etrailer.com. Today we're taking a look at this 72-inch-long, three-inch-wide steel piano hinge. Now this hinge'll provide sturdy, continuous support along the length of your cabinet, your door, or your panel. These are great for oversize doors, trailer doors, and entrance doors. These will provide more support than multiple small hinges. This is a nice continuous design, so it will reduce the stress on the hinge when it's used with heavier doors, and this does rotate 270 degrees.
Just wanna zoom in to show you that. If you see here, we can rotate it back about 90 degrees that way, and then all the way 180 degrees this way, so total of about 270 degree rotation for full opening and closing motion. This is a nice durable steel construction. has an unplated mill finish, and this is a weld-on or bolt-on installation. How if you do bolt it on, it does require drilling holes into the hinge for that.
This part as made in the USA. Do a few dimensions on this. First, do the overall length. So we'll measure one end all the way to the other end with the tape measure, right at 72 inches or six feet, overall length. The width on it, and when we measure the width, it's gonna be the widest part, so when it's both pretty much open, the open width.
Let's zoom in on this, so we get a better view. So if we open it all the way you can see it's gonna be right at about three inches wide and the knuckle length, each one of these sections here is called a knuckle, so the length on the knuckle is going to be right at two inches. And then the pin that goes through this hinge, the diameter on that pin is gonna be 3/8 of an inch. So it's a very durable, heavy duty hinge you can see. But that should do it for the review on the 72-inch-long, three-inch-wide steel piano hinge..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
3" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter - Steel - MA75VR
Average Customer Rating: 4.7 out of 5 stars (179 Customer Reviews)
Great for your heavy-duty utility trailer, this steel piano hinge provides uninterrupted support for your door or tailgate. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.by: Whitney 12/09/2022
Heavy duty & exactly what we needed! Th anks!
by: Kirby 11/11/2022
Great Service! Didn't have quite the dimension I needed for a one-piece replacement but gave good advice in using to 6' hinges in order to make my 88 1/2" full length hinge. Thank you
by: Nelson03/23/2022
Great product. Very solid construction and fast service. Loved the fact I could drill my own screw holes. If I ever need another large hinge I will be coming back to etrailer first.
by: James 07/14/2022
Heavy duty more than I expected which was perfect
by: Bruce05/11/2022
Just what I was looking for. Excellent service and fast shipping. Thank You
by: Lawrence 09/05/2021
Excellent Quality and very good service> Thank You Lawrence I. Pratt
by: Sidney 12/28/2021
very pleased with quality
by: Brook 10/19/2021
would have ben 5 stars but had a heck of a time gettin the grease off so it caould be painted .
by: Kevin 11/15/2021
Quick and easy order process. Item received exactly as ordered.
by: Mark 08/23/2022
by: Sammy 01/03/2023
by: Mark 01/08/2022
by: William 09/09/2021
by: Randall12/15/2021
by: Darren 01/31/2022
by: Marcus10/15/2022
Review from a similar Marlboro Continuous Hinge in Trailer Door Hinges
This is the item I needed and it was sent out and received very fast, very pleased with the product here for my enclosed race trailer to help with my need after I had upgraded my trailer floors & ATP ramp door flap. Item was just as described in the video upon ordering off the website.
Thanks
by: Alan12/12/2022
Review from a similar Marlboro Continuous Hinge in Trailer Door Hinges
Nice heavy duty hinge. We used them as a replacement for the rusted light duty hinge on our custom hunting camp trailer. Received them quickly and in time to installed before the 2022 deer season.
by: Moses05/24/2022
Review from a similar Marlboro Continuous Hinge in Trailer Door Hinges
used cobalt drill bit drilled 4 holes in hinge on corners with paper to keep door space for future paint ,drilled holes in hinge only just touch wood ,undid 4 screws ,recessed wood with bur thing ,punched stainless hinge into wood, screwed in screws near flush ,very clean super price and strong ,thank you
by: Jonathan09/25/2022
Review from a similar Marlboro Continuous Hinge in Trailer Door Hinges
Worked out great for my trailer build and made thing a lot easier for making a heavy duty tool box door in the v of a tag trailer
by: Michael09/28/2022
Review from a similar Marlboro Continuous Hinge in Trailer Door Hinges
Worked well on the rear compartment door for my Airstream.
by: Ian 01/20/2023
Review from a similar Marlboro Continuous Hinge in Trailer Door Hinges
Used this hinge to replace 2 frozen hinges on our 10 foot enclosed trailer. Because of the full length, we were able to bolt it on instead of welding. We cut the old ones off with a cut off wheel. It worked out great!
by: Loriann08/15/2022
Review from a similar Marlboro Continuous Hinge in Trailer Door Hinges
Awesome! Used it on our cargo hauler tailgate ramp. A lot stronger than the original aluminum hinge that pulled apart!
by: Joel 10/29/2022
Review from a similar Marlboro Continuous Hinge in Trailer Door Hinges
Used it to replace the cheap factory hinge on my trucks Tonneau Cover. Huge improvement!!
by: Bob05/31/2022
Review from a similar Marlboro Continuous Hinge in Trailer Door Hinges
Correct item received, but tape gum on the hinge will require extensive cleaning before use. Was not necessary to be taped up, Or use painters tape the is easily removable leaving no film.
by: David09/15/2022
Review from a similar Marlboro Continuous Hinge in Trailer Door Hinges
This hinge is heavy duty. We have had no issues with the door sense installing. If in need to get rid of hinges that keep getting bent, this might be the hinge you are looking for to do the job.
25
179
Show More Reviews
See what our Experts say about this Marlboro Trailer Door Hinges
- Can 3" Wide Continuous Hinge # MA75VR be ShortenedYes, if you wanted to cut down the 3" Wide Continuous Hinge # MA75VR to shorten it you certainly could.
view full answer... - Can 3" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter Be Cut DownThe 3" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter - Steel part # MA75VR can be cut down to your exact length needed. I would simply recommend during so at the knuckle intersections so you don't have any weak knuckles. The hinge is designed to be used on trailer doors and tailgates, we unfortunately cannot comment on other applications though I'm sure you could find many uses for this. That said, so long as it's installed correctly i.e. solid welds there should be no issues using...
view full answer... - Do Marlboro Piano Hinges Have Weight CapacityMarlboro does not list weight capacities for either the # MA75VR or the # MA45VR that you referenced. They state it will be up to the installer to determine the appropriate weight capacity. We also do not have this in a 3 foot length.
view full answer...
Do you have a question about this Trailer Door Hinge?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer door hinge information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Eric H
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.