Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
With having 22'6" from your tail light location to the tongue on your trailer I recommend going with at least a 30' wiring harness. The additional length is needed so you will be able to route your wiring on the frame to the…
view full answer...We do have an adapter that will allow you to attach a 2" cargo carrier to the 1-1/4" hitch on your 2016 Nissan Altima. I recommend the adapter #e43YR. This is 6-1/2" long and will go in to your 1-1/4" hitch and give you a 2"…
view full answer...If you used strong enough brackets when installing the Single Axle Trailer Fender #CE18041ATB they'd be strong enough to support people of all shapes and sizes. These don't have a specific weight capacity but they are pretty strong. Normally…
view full answer...The Paddle Handle Locking Latch w/ Release - 5-1/2" Long x 4-1/4" Wide - Steel #PLR5115 does not have holes drilled for installation. You would need to drill them for this particular handle. The latch will extend approximately 1/2 inch past…
view full answer...Send me the pictures you have and I'll see if it's something we can get.
view full answer...Since your brake controller appears to be working - 3 of the 4 trailer brake assemblies work correctly - the issue is likely to be on the trailer side. The issue with one of your four brake assemblies locking up could be due to it needing adjustment…
view full answer...One wheel locking up on your trailers brakes could be for a few reason. Most likely it's due to a brake assembly that is out of adjustment. You want to adjust the assemblies so there is only a light drag on them when they are turned by hand.…
view full answer...I went out to the warehouse and measured a Mounting Bracket for 6-1/2" Oval Trailer Tail Light - Stainless Steel Item #337LB1SS. The internal dimensions of the large oval opening are 6-3/4 inches long by 2-1/2 inches tall.
view full answer...Using butt connectors such as #05731-5 is probably the fastest way to connect wires. Using a heat shrink butt connector such as #DW05744-5 would be a better, longer lasting connection. The white ground wire will need to secure to the trailer frame…
view full answer...Locking out a Titan Model 60 actuator like the part #T63FR that you referenced requires inserting the lock out tool into the into the slot right behind the portion of the coupler that inserts into the outer casing. I pointed out where in the attached…
view full answer...Locking out a Titan Model 60 actuator like the part #T63FR that you referenced requires inserting the lock out tool into the into the slot right behind the portion of the coupler that inserts into the outer casing. I pointed out where in the attached…
view full answer...The maximum static weight capacity for the Yakima HD Crossbars #Y01156 along with the Timberline Towers #Y33TR on your 2022 Subaru Outback Wagon is rated at 500 pounds. This weight limit is the maximum weight limit for each of the components. To have…
view full answer...Related Searches
Filter Your Search
Contact and Help