Replacement Brake and Hub and Drum Kit for Dexter 3,500 lb Axles
Updated 11/11/2020 | Published 11/09/2020
Products Featured in This Question
Question:
hello, do you all have a break kit for Dexter 3500lb axles? with the housing and the covers with bearings installed already.
asked by: Thomas H
Expert Reply:
We do! For a brake kit I recommend going with the Self-Adjusting Kit # AKEBRK-35-SA for electric brakes or the Free Backing Kit # AKFBBRK-35 for hydraulic brakes.
When it comes to the hub and drum assembly you can choose out of the following based on your bolt pattern:
5 on 4-1/2" - # AKHD-545-35-EZ-K
5 on 4-3/4" - # AKHD-5475-35-EZ-K
5 on 5" - # AKHD-550-35-EZ-K
5 on 5-1/2" - # AKHD-555-35-EZ-K
6 on 5-1/2" - # AKHD-655-35-EZ-K
I am attaching some helpful articles that you can check out if you aren't sure what bolt pattern that you have, as well as some installation videos that you can reference.
Product Page this Question was Asked From
Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Complete Breakdown of the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub with Integrated Drum - AKHD-655-35-K
- Video: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles: The Breakdown
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Search Results: lynx
- Q&A: Recommended Hub and Drum Assembly with 6 on 5-1/2 Bolt Pattern for 2-132, 3,500 Pound Axle
- Q&A: Replacement Hub for AxleTex BD2-545 that Has 6 on 5-1/2 inch Bolt Pattern
- Q&A: Hub Needed for 3,500 lb Axle to Convert to 6 on 5-1/2 inch Bolt Pattern for Wheel
- Q&A: Replacement Trailer Hub Assemblies For 3,500LB Axles Using L68149 Inner and L44649 Outer Bearings
- Q&A: Trailer Hub Replacement For Lippert Axle NV178936
- Q&A: Replacement 3,500 lb 10 inch Brakes and Hubs for Aztec Trailer
- Q&A: Replacement Brake and Hub Assemblies Needed for Dexter Axle 3,500 lb Axles
- Shop: Norcold Polar Full RV Refrigerator w Freezer - 8.2 Cu Ft - 12V - Stainless Steel - Left Hand Doors
- Shop: Westlake ST235/80R16 Trailer Tire with Black Margay Aluminum Wheel - 8 on 6-1/2
- Shop: Aluminum Margay Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Glossy Black
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Search Results: trailer wiring
- Video: How to Choose a Trailer Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer tires and wheels
- Shop: Brake Controller
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
on Trailer Brakes
