15" x 6" Trailer wheel has 6 on 5-1/2 bolt pattern and 4.25" pilot diameter. Rustproof aluminum wheel has a 5-spoke design in glossy black.
Features:
Specs:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is Jeff with etrailer.com. Today, we'll take a look at the Lionshead 15-inch by six-inch Margay Glossy Black aluminum trailer wheel with the six on five and a half inch bolt pattern. Now this is an aluminum wheel, it is durable, lightweight, rust-proof. Now we mentioned this is the Margay series, which you can see is a six-spoke design, has a Glossy Black finish with the machined-edge on the spokes, and even on the lip, that machined-edge gives a nice shine to the wheel. They do use an automotive-grade clear coat finish on the front to protect it from scuffs and scratches. Now the valve stem, you can see right over here is included.
It's pre-installed into the wheel. Now the center cap is not included. If you do want a center cap, we do sell those separate on our website. You do wanna make sure to get a center cap that has the same diameter as the pilot hole here. 'Cause when you install that center cap, it'll go through this hole.
The diameter on this pilot hole is 4.25 inches. Now this wheel does meet the DOT, Department of Transportation, specifications and the SAE J1204 standards. A few dimensions on this we're gonna measure is the diameter and the width. The diameter is always measured inside to inside. So if we take our tape measure, and if we go inside to inside all the way across, there's your 15-inch diameter.
The width is the same way. You're gonna measure inside to inside, or bead seat to bead seat. six inches on the width. Bolt pattern on this wheel is a six on five and a half inch bolt pattern. And if you wanna measure that bolt pattern on a wheel like this that's an even number of lugs, six lugs, what you'll do, it's pretty simple, because the lug holes are directly across from each other.
So you just pick either hole, let's say this one, and then you're gonna measure across from the center of this hole to the center of this hole right across from it. On this, it'll measure five and a half inches, so it's a six lug five and a half inch bolt pattern. This wheel does use a wheel lug size of a half-inch by 20, and the weight capacity on this wheel is 2,830 pounds. But that should do it for a look at the Lionshead 15-inch by six-inch Margay Glossy Black aluminum trailer wheel with the six on five and a half inch bolt pattern.
Do you have a question about this Trailer Tires and Wheel?
Condition: Surface Scratches
Notes: There are scratches and paint chips along the rim of the wheel.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.









Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.