Correct Hubs-Drums and Brakes for Lippert 3,500 lb Spindle
Updated 05/11/2020 | Published 05/08/2020
Products Featured in This Question
Question:
have the full drum brakes kit for this axle if you have send me the part number
asked by: Domingo M
Expert Reply:
The Lubed 4" Drop Spindle with Brake Flange for 3,500-lb Axle # LC12338, uses standard 10" diameter hubs and brakes, for which we have the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies # AKEBRK-35-SA. For the brake mounting hardware (nuts and lock-washers) you can use part # BRKH10B.
The most common hub-drum assembly for this application is part # AKHD-545-35-EZ-K, with a 5 on 4-1/2 wheel bolt pattern. However, depending on the wheels you plan on using, they're also available with the following bolt patterns:
5 on 4-3/4 - part # AKHD-5475-35-EZ-K
5 on 5 - part # AKHD-550-35-EZ-K
5 on 5-1/2 - part # AKHD-555-35-EZ-K
6 on 5-1/2 bolt pattern - part # AKHD-655-35-EZ-K
Don't forget to pick up a spindle washer # 5-23, spindle nut # 165686 and cotter pin # 165649 as well for each spindle.
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 10 inch electric brake assembly
- Search Results: 5 on 5 drum
- Search Results: bk2 100 bearing kit
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre Greased
- Video: Review of etrailer Trailer Brakes - Drivers Side Brake Assembly - AKEBRK-35L-SA
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Q&A: Will the Dexter 10 Inch Hub and TruRyde 10 Brake Assembly Work Together?
- Shop: Electric Trailer Brake Assembly for Lippert ABS Hubs - 10" - Left/Right Hand - 3,500 lbs
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub with Integrated Drum - AKHD-655-35-K
- Video: Complete Breakdown of the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Video: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles: The Breakdown
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Mounting Hardware for 10" Single Brake Assembly
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: lynx
- Q&A: Trailer Hubs/Drums with 6-on-5-1/2 Bolt Pattern That Use Bearings L68149 and L44649
- Q&A: Replacement Brake and Hub Assemblies Needed for Dexter Axle 3,500 lb Axles
- Q&A: Replacement Trailer Hub Assemblies For 3,500LB Axles Using L68149 Inner and L44649 Outer Bearings
- Q&A: Will Easy Grease Hub and Drum AKHD-655-35-EZ-K Fit A 2016 Lippert 3500lb Axle?
- Q&A: Trailer Hub Replacement For Lippert Axle NV178936
- Search Results: cotter pin