Trailer Hub Replacement For Lippert Axle NV178936

Question

Question:

Hello I have a lippert components #NV178936 4400# axle on my rv 10inch drums 6lug. Do these use 3500# hubs and breaks or 4400# thanks

asked by: John S

1

Helpful Expert Reply:

The correct hubs for the 4400 Lb Lippert Axle NV178936 are 3,500 lb hubs as confirmed by Lippert. If you need to replace the hubs, I recommend Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased part # AKHD-655-35-K. They have a 6 on 5-1/2 inch bolt pattern and all of the bearings, races and seals are included to fit the spindle of the NV178936 axle.

expert reply by: Heather A

1

click to enlarge

Answer 1

The correct hub and drum assembly replacement for your Lippert 4,400 lb axle is the #8-407-5UC3-EZ. This comes with bearings and a grease seal. If you need brakes as well you can use the #LC66WD, or for self-adjusting brakes #K23-478-479.

view full answer...

Answer 2

Hey Craig, sorry about the confusion but the Trailer Hub and Drum Assembly #AKHD-655-35-K that you referenced does come pre-greased and ready to install. The bearings are in the hub, they have been packed with grease, and there's a grease seal…

view full answer...

Answer 3

Thanks for the great photo of your Tacoma, trailer and oh, just a bit of natural beauty! Awesome. The linked page displays all idler hubs and hub/drum assemblies that use inner bearing #L68149, outer bearing #L44649 and that have the 6-on-5-1/2 wheel…

view full answer...

Answer 4

We do! For a brake kit I recommend going with the Self-Adjusting Kit #AKEBRK-35-SA for electric brakes or the Free Backing Kit #AKFBBRK-35 for hydraulic brakes. When it comes to the hub and drum assembly you can choose out of the following based on…

view full answer...

Answer 5

Since your trailer has a 3,500 lb axle on it currently the hub part #AKHD-655-35-K that you referenced will be what you'd need to go to a 6 on 5-1/2 inch bolt pattern.

view full answer...

Answer 6

For replacement brake assemblies you'd want the part #AKEBRK-35-SA. These are 3,500 lb 10-inch diameter brake assemblies that will fit and work well. For 6 lug hub/drums the part #AKHD-655-35-EZ-K would then work for both sides as well.

view full answer...

Answer 7

If the trailer hub has "pre-greased" in the title it will be one that is pre-greased but if that is not present then it is not pre-greased. So the part #84656UC3-EZ is not pre-greased but for a similar option that is we have the part…

view full answer...

Answer 8

The Lubed 4" Drop Spindle with Brake Flange for 3,500-lb Axle #LC12338, uses standard 10" diameter hubs and brakes, for which we have the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies #AKEBRK-35-SA.…

view full answer...

Answer 9

We will have several different pre packed hub assemblies for you to choose from depending on if you need a hub for drum brakes or hubs for an idler axle. Here is a list of hubs for both drum and idler axles in the different bolt patterns that use the…

view full answer...

Answer 10

Yes, since the Easy Grease Trailer Hub and Drum #AKHD-655-35-EZ-K you were looking at uses the standard bearing combination used by 3500lb axles which is #L68149 inner bearing and #L44649 outer bearing, this hub will fit your 2016 Lippert 3500lb Axle…

view full answer...

Answer 11

The etrailer.com Trailer Hub and Drum Assembly #AKHD-655-35-EZ-K referenced in your question is the correct replacement for the idler hub #AKIHUB-655-35-EZ-K. The Hub and Drum Assembly has a 6 on 5-1/2 bolt pattern and is designed for 3,500 pound E-Z…

view full answer...

Answer 12

The Dexter 3,700 Lb Axle uses an L68149 inner bearing and a L44649 outer bearing so yes, you can get these bearings with a 6 on 5-1/2" bolt pattern. I am not sure if you're after a hub or hub/drum so I have attached our complete selection…

view full answer...

Trailer Hub Replacement For Lippert Axle NV178936

Product Page this Question was Asked From

Continue Researching