Replacement Hub and Drum Assembly for 3,500 Pound Axle with 6 on 5-1/2 Bolt Pattern
Products Featured in This Question
Question:
Hello, I need a replacement brake drum. The part number stamped on the drum is RVD-H-65535. This is on a work/player camper. It is a 6 lug bolt pattern. Do you have a drum that will replace this?
asked by: Matthew P
Expert Reply:
The 65535 likely stands for your 6 on 5-1/2 bolt pattern on a 3,500 pound axle. Which means your bearings numbers should be # L68149 and # L44649, inner and outer. You'll want to verify these are correct before purchasing.
If I'm right about the bearing numbers the correct replacement hub and drum assembly is # AKHD-655-35-K for standard spindles and # AKHD-655-35-EZ-K for E-Z lube spindles.
If you have different bearings let me know the bearing numbers and I'll find the correct hub for you.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Electric Trailer Jack - A-Frame - 18" Lift - 3,500 lbs
- Search Results: trailer shock absorbers
- Search Results: axle lift blocks
- Search Results: lift
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System - 10,000 lbs
- Shop: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
- Q&A: Are There Replacement 46" Long Leaf Springs for Military Trailers
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
- Shop: Lock N Roll Articulating Trailer Hitch for 2" Receivers - Vehicle Side - 11,000 lbs
- Shop: RV Bearing
- Shop: Trailer Hitch
- Q&A: Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
- Search Results: e93yr
- Search Results: 8880508
- Q&A: Recommended Trailer Hubs and Brakes for Lippert 4,400 Pound Axle
- Search Results: 19309
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Detailed Breakdown of the etrailer Electric Trailer Brakes
- Video: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles: The Breakdown
- Video: Feature Review Replacement Magnet Kit for 10" Electric Trailer Brake Assemblies
- Q&A: Self-Adjusting Trailer Brakes For a Lippert 4,400LB Axle On 2017 Aspen Trail 2790BHS Travel Trailer
- Search Results: brake magnet
- Q&A: How to Determine if You Have Manual or Self-Adjusting Brakes
- Q&A: Replacement Hub and Drum Assembly for Lippert 4.4K 136214 Hub and Drum
- Q&A: Can 3,500 lb Hub and Drum Be Used for 4,400 lb Lippert Axle
- Video: The Low-Down on the Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles
- Video: How to Install the etrailer Electric Trailer Brakes on a 2009 Carriage Cameo Fifth Wheel