bing tracking image
  1. Trailer Bearings Races Seals Caps
  2. etrailer
  3. Seals
  4. Grease Seals - Double Lip
  5. 3.38 Inch O.D.
  6. 2.13 Inch I.D.
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
etrailer

Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL

Part Number: GS-2125DL
In Stock
$12.53
Retail:$13.34
You Save: 6%
Trailer Bearings Races Seals Caps
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Trailer Hub Grease Seal Great Prices for the best trailer bearings races seals caps from etrailer. Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL part number GS-2125DL can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2616)
  • Q & A (0)
  • Photos

etrailer Trailer Bearings Races Seals Caps - GS-2125DL

Highlights

  • Double Lip Seal Design: Retains grease and keeps out water better than single lip seals.
  • Exact Fit for Dexter Axles: Ideal for 5,200-7,000 lb axles with a 2.125" I.D. and 3.376" O.D.
  • Cross-Reference Compatibility: Replaces seals like Dexter #010-010-00 and National #440972.
  • Optimal for Various Conditions: Suited for trailers needing durable, reliable grease seals.
  • Reliable Performance: Perfect for both utility and RVs to ensure long-lasting service.
  • Simple Measurement Verification: Ensure accurate fit with digital calipers for I.D. and O.D.

Features to know about

Keep Grease Inside and Water Out: Double Lip Seal Design

When you're cruising down the highway or tackling rugged roads, keeping your trailer’s internals safe is crucial. The Grease Seal GS-2125DL features a double lip design, ensuring that grease stays inside while water and dirt are kept at bay. This design makes it a dependable choice for those who need maximum protection and want to avoid the hassle of frequent maintenance.

Precision Fit for Dexter Axles: Exact Inner and Outer Diameter

Got a Dexter axle between 5,200 and 7,000 lbs? The GS-2125DL is crafted to fit precisely with a 2.125" inner diameter and a 3.376" outer diameter. This exact match ensures easy installation and a firm fit, helping you keep your wheels rolling smoothly without any unexpected wobbles or leaks.

Reliable Cross-Compatibility: Perfect Replacement

Whether you’re replacing an old single lip seal like the 10-1 or aftermarket options, the GS-2125DL works seamlessly as a reliable replacement. Its compatibility ensures that it meets the standards of well-known brands like Dexter, Transcom, and even Chicago Rawhide, solving the problem of mismatched or ill-fitting seals.

Durable and Long-Lasting: Built for the Long Haul

Don't settle for parts that wear out quickly. GS-2125DL users rave about its longevity, noting that it's often better than the original single lip designs they replace. With feedback showing that it stands the test of multiple years and thousands of miles, you can trust this seal to stick with you through long journeys and heavy use.

User-Approved Smooth Installations: Easy as 1-2-3

No one wants to spend hours in the garage. The GS-2125DL’s design offers an installation process that many users find straightforward and headache-free. With the correct dimensions, most installations are a smooth experience, letting you spend more time on the road and less beneath the trailer.

GS-2125DL Double Lip Grease Seal - Replaces Single 10-1

Replaces DL-2125-03, DL2125-00, DL-2125-53





Customer Satisfaction Score:

Ratings & Reviews

4.8

2601 reviews
5 Stars
(2268)
4 Stars
(228)
3 Stars
(55)
2 Stars
(16)
1 Star
(34)
Trailer Hub Grease Seal

by:

Another great product, thanks



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
2601
Show More Reviews

See what our Experts say about this etrailer Trailer Bearings Races Seals Caps

  • Timbren Axle-Less Suspension System Compatibility with Aluminum I-Beam Trailer Frame
    The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs # ASR35HDS02 is compatible with I-beam frames and in tandem axle configuration. Due to the Aluminum frame, I recommend putting a thin rubber pad between the steel mount and the aluminum I-beam. The powder coat on the steel should keep the two dissimilar metals from galvanic corrosion, but a thin rubber pad would drastically increase this safety. Zinc plated hardware will work well with...
    view full answer...
    Image 1 for
  • Replacement Trailer Brake Assemblies for AxleTek B12EA-22
    Hey Josh, the replacement for your existing B12EA-22 brake would be # AKEBRK-7R-SA for the right side and # AKEBRK-7L-SA for the left. There are two sizes of grease seals that fit 7k axles and there isn't a rhyme or reason as to which you may have/need. So if the spindle diameter if 2.2250 inch where the seal rides the correct seal you would need is the part # GS-2250DL or if it's 2.125 inch you'd instead need the part # GS-2125DL.
    view full answer...
  • Looking For Replacement For T-23934 Seal
    Hello Al, thanks for reaching out. We may have a seal option for you, but I was unable to find any references for the seal number T-23934 you provided. There are no references in our database and even the google does not have anything. In this case the best way to find the correct replacement will be to measure. Use a caliper and measure the OD of the seal, then measure the part of the spindle where the seal rides. This will tell use the necessary ID and OD for your seal and if you can...
    view full answer...
  • Replacement Bearing Kit for 5,800 lb Lippert Axle
    What is the axle capacity that you have? We don't have an easy way to look up what you have with the info you listed but if you get me the axle info I can see what you may need.
    view full answer...
  • Availability of 8 on 6-1/2 Hub and Drum Assemblies for the Timbren Axle-Less Suspension ASR35HDS02
    We do have some hub and drum assemblies that you can use with the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR35HDS02 which have an 8 on 6-1/2" bolt pattern. Our Trailer Hub and Drum Assembly # AKHD-865-7-2-EZ-K has a 12" diameter and comes with the needed bearings and grease cap for your application. It does come with a grease seal, but you will need to use part # GS-2125DL (Qty 1) or part # RG06-090 (Qty 2) for the correct seal for the smaller spindle. If you don't already...
    view full answer...
  • Looking For Replacement Brakes, Hubs, And Leaf Springs For My Dexter Axles
    Hey Steve, Thank you for that information you provided, it sets me up to get you the direct replacements. For that replacement brake assembly you will want to go with the Dexter Nev-R-Adjust Brakes # 23-458-459. This is the left and right hand assemblies that came originally on the trailer, ready to slide on and bolt on for you. We have the hub and drum assemblies as well that are pre greased with the bearings, races and seals already in them ready to slide on. For that you want to...
    view full answer...
  • Looking For Bearing Kit For 2017 EZ Loader Trailer With 5,200 lb Axles
    Hello John, thanks for reaching out.The model number of your EZ Loader Trailer does indicate a 5,200 lb axle rating. The 5,200 lb axles do use a standard bearing combination, the # 25580 (1.75" inner diameter) inner bearing and the # LM67048 (1.25" inner diameter) outer bearing. That said, there are two common seal sizes that can go with this bearing combination, and regrettably, there is no way for me to look up your trailer to know the seal size. The trailer manufacturer may be able...
    view full answer...
  • Economical Option for Trailer Wheel With 5 on 5-1/2 Bolt Pattern and Trailer Tires
    It sounds like you are just looking for the most economical way to add trailer tires and wheels with a 5 on 5-1/2" bolt pattern but are concerned they won't fit when you replace your axle. Realistically this is a valid concern and your axle may in fact not have spindles that accept a hub with the same 5 on 5-1/2" bolt pattern so you may need to get new wheels and tires when you decide to do that. For now, the most economical option for you to wheels and tires is first with the Modular...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Bearings and Seal for Replacing UFP Dexter 41062 Hub with Kodiak Hub and Rotor
    I spoke with my contact at UFP Dexter and he said that your 41062 hub uses inner bearing 031-030-02, outer bearing 031-032-02, and seal 010-181-00. This is the equivalent of inner bearing # 25580, outer bearing # LM67048, and grease seal # GS-2125DL which can all be found in the bearing kit # BK3-310 along with the races for the bearings. Unfortunately the bearing kit # DBRKHW85G that you purchased isn't the same as the grease seal has a slightly larger diameter but that can easily be fixed....
    view full answer...
  • Bearings and Races for 7,000 Pound Trailer Axle
    The most common bearings and seals for a 7,000 pound axle are # 25580 inner bearing, # 14125A outer bearing, # 25520 inner race and # 14276 outer race. The grease seal can vary, and will usually either be the # GS-2250DL, which has a 2.250 inch inner diameter and 3.376 outer diameter, or # GS2125DL with a 2.125 inch inner diameter and 3.376 inch outer diameter. We do also offer complete bearing kits for this axle. For the GS-2250DL grease seal, you can use the Kit # BK3-200. For the #...
    view full answer...
    Image 1 for
  • How Much Pressure is Required to Install a Trailer Grease Seal
    For starters, the grease seal installs on the trailer hub, not the spindle. It should be a rather tight fit and usually requires a hammer and block of wood to install. In order to make sure you have the correct one, you will need to measure the outer diameter of the spindle and then the inner diameter of the trailer hub where the grease seal sits. These measurements will need to be taken with a digital caliper to the nearest thousand of an inch. If you can let me know what the above two...
    view full answer...
    Image 1 for
  • Replacement Hubs With 5 on 5 Bolt Pattern
    We do have hubs available with a 5 on 5 bolt pattern; they are each compatible with 3,500 lb axles, have inner bearing # L68149 and outer bearing # L44649 and fit wheels that are between 13 inches and 15 inches. You need to take apart your old hub in order to find out if you have the same bearing numbers. If so hub and drum assembly # AKHD-550-35-K will work; for an idler hub assembly # AKIHUB-550-35-K would be the right choice. I've added a link to video reviews of these parts for you...
    view full answer...
  • Bearing Kit For Jayco Camper With Dexter 5,800 lb Axles
    Hey Tyler, thanks for reaching out. We don't have a good way to look up a Dexter serial number (only Dexter can do that), but we do have the sizing for their 5,200 lb axles on file here. The bearing kit you'd need is the part # BK3-110. The grease seal part number is # GS-2125DL.
    view full answer...
  • What Bearings and Seals do I Need for my 8 on 6-1/2 Hub on 6k Axles
    Hey, Matthew! I just want to make sure I’m understanding you correctly, when you mention needing two different size outer bearings, can you tell me a bit more about what you mean? For a 6,000 lb hub with that bolt pattern, you’ll typically need: Inner bearing: # 25580 Outer bearing: # 15123 If you’re replacing the bearings, it’s a good idea to replace the seal as well, since they often get damaged when removing the hub. Your setup most likely uses seal # GS-2125DL. Let me know if you...
    view full answer...
  • Do I Have to Use Timken Races with Timken Bearings, or can I Use Mine that were Made in China?
    Hello Dennis, You can use your current Chinese races, and just get the bearings from the Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal # TMK32VR. You will want: - Inner bearing: Timken Replacement Trailer Wheel Bearing - 25580 # TMK44FR - Outer bearing: Timken Replacement Trailer Wheel Bearing - 14125A # TMK54FR Also, don't forget some grease seals if you do not already have some on hand. - Timken: Timken Grease and Oil Seal - Double Lip - I.D. 2.125"...
    view full answer...
  • How to Identify Brake Assembly for Triple Axle Boat Trailer
    Hi Scott; I don't have a way of knowing the exact brakes you need, but I can help you figure it out. Based on the 6 on 5-1/2 bolt pattern you have 3,500 lb - 6,000 lb axles. I would look on the trailer axles to see if you can find an axle tag to identify them. The capacity is probably listed. but if you don't see it the manufacturer can identify it using the serial number. Assuming you're looking for hydraulic drum brakes you can use the etrailer Hydraulic Trailer Brakes - Uni-Servo -...
    view full answer...
  • Replacement Bearing Kit for Lippert and Dexter 7,000 lb Axles
    Hey Rudi, that's a nice set up. It looks like your 2023 Keystone Raptor 424 Toy Hauler has three 7,000 lbs axles. The correct bearing kit is going to be item # BK3-210. These are sold per hub so you'll need six of them. The Bearing Kit item # BK3-210, includes the item # 14125A outer bearing, item # 25580 inner bearing, the inner race item # 25520, the outer race item # 14276, grease seal item # GS-2125DL, and a replacement cotter pin and and spindle washer. If you have any additional...
    view full answer...
  • How to Find Correct Replacement Grease Seal for 5,200 lb Lippert Axle
    Hey David, thanks for reaching out! You either need the Grease Seal # GS-2125DL which has a 2.125" inner diameter, or you need the Grease Seal # GS-2250DL which has a 2.250" inner diameter. The best way to determine the correct fitment is to confirm your grease seal part number, but you can also use a digital caliper to measure your trailer spindle where the grease seal rides so you know this will fit.
    view full answer...
  • Replacement Grease Seal for a Curt or Lippert V000845621 Axle
    Hey James, thanks for the information. For a compatible grease seal you'll need the Grease Seal item # GS-2125DL. This grease seal has a 2.125" I.D. and 3.376" O.D.. It is sold individually. What color are your brake drums? I found the seal size on Grand Design's website and was curious if you have the new ABS braking system. You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
    view full answer...
  • Replacement Bearings and Grease Seals for Dexter 7k Axle on 2021 Montana 3120RL Legacy
    Hi Katherine; Dexter 7k axles will use # 14125A and # 25580 bearings but the grease seal can vary. It either has a 10-36 grease seal # RG06-070 with a 2.25" inner diameter (ID) or # GS-2125DL with a 2.125" ID. Normally I would say to send me your axle tag information and I can verify with Dexter but they haven't been responding lately so it might take a while. The fastest way would be to pull the hub and either look for a part number on your existing grease seal or measure the ID. If...
    view full answer...
  • Hubs and Disc Brakes For a MagicTilt Boat Trailer With 6,000LB Axles
    The Dexter Trailer Idler Hub Assembly # 8-213-51UC1-EZ is what we have for the part number PD2550-L but you will need the Grease Seal # GS-2125DL to replace the larger seal in the kit. Each pair of hubs will use these Bearing Buddy Protectors # BB2441SS instead of the PF1102 which is for a different size hub bore. The Demco Hydraulic Brake Actuator # DM8164311 is the exact same as the part number PG1094. The DeeMaxx Disc Brake Kit # DE28YR will work in place of the PG2033. And these will...
    view full answer...
  • Grease Seals for a Dexter 7,000 lb. Axle
    We do have the seals that you need. For your 7,000 lb. Dexter Axle, the grease seal will either be the # GS-2125DL or the # GS-2250DL. The difference is the inner diameter of the seal. The # 10-36 has an inner diameter of 2.250" and the # GS-2125DL has an inner diameter of 2.125". To verify which seal you need, you can either look for the number on your current seals or measure your spindle where the grease seal rides.
    view full answer...
    Image 1 for
  • Replacement Brake Kit For Deemax 12 Disc Brake Kit Severe Corrosion
    With the severe corrosion on your DeeMaxx Disc Brake Kit # DE28YR you will most likely want to move to stainless steel components. We do offer the Maxx Coat Rotors/Stainless Calipers # DE58YR which is a more price conscious upgrade. Otherwise if you want to go fully stainless you will need the Stainless Steel Kit # DE54VR along with 2 Stainless Steel Idler Hubs # KH42655S. These hubs will need the Inner Bearing # 25580, Outer Bearing # 15123 and a Grease Seal # GS-2125DL to be complete...
    view full answer...
  • Which Grease Seal would Fit Dexter 7k Trailer Axle
    7k Dexter axles are a little annoying as they can have two different seals with only difference being the inner diameter. If the seal has an inner diameter of 2.250 inch you'd want the part # GS-2250DL or if instead you had the spindle diameter as 2.125 inch you'd want the # GS-2125DL. So the least invasive way to determine what you need will be to pull a hub off and measure the diameter of the spindle where the seal rides. To get an exact figure you'll need a digital caliper like the...
    view full answer...


< Previous
123. . .9



Do you have a question about this Trailer Bearings Races Seals Cap?


Info for this part was:

Employee Leah B
Updated by:
Leah B
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Matthew E
Updated by:
Matthew E
Employee Manda E
Updated by:
Manda E
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<