bing tracking image
  1. Weight Distribution Hitch
  2. Equal-i-zer
  3. 1000 lbs
  4. 1100 lbs
  5. Fits 2 Inch Hitch
  6. WD With Sway Control
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW

Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW

Item # EQ37120ET
Our Price: $1,049.36
Weight Distribution Hitch
This item qualifies for Free Shipping
Shipping Weight: 114 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full weight distribution hitch installation instructions. Great price Bullet Ultra Lite Travel Trailer weight distribution hitch and expert service. Keystone Bullet Ultra Lite Travel Trailer, 2018 weight distribution hitch by Equal-i-zer are available from etrailer.com. For expert service call 1-800-940-8924 to order your Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW part number EQ37120ET, or order online at etrailer.com.
  • All Info
  • Reviews (756)
  • Q & A (0)
  • Photos

Equal-i-zer Weight Distribution Hitch - EQ37120ET

  • 1000 lbs
  • 1100 lbs
  • Fits 2 Inch Hitch
  • WD With Sway Control
  • Allows Backing Up
  • Equal-i-zer
  • Electric Brake Compatible
  • Surge Brake Compatible
  • Some Sway

Steel-on-steel friction works to prevent and correct trailer sway in this unique weight distribution system. Sway control brackets ensure that your trailer stays in line with your tow vehicle. 2-5/16" Hitch ball and adjustable shank included.


Features:

  • Evenly distributes weight over axles of tow vehicle and trailer for stability and control
    • Creates a level ride for both tow vehicle and trailer
  • Integrated 4-Point Sway Control limits side-to-side movement
    • Brackets keep spring bars in place for a rigid system that holds trailer in line
    • Steel-on-steel friction helps to minimize sway caused by winds, curvy roads or sudden maneuvers
    • No lift chains - eliminate unwanted movement
  • Unique design makes system compatible with surge-type brake actuators
  • Spring bars flex for a controlled, even ride
    • Constructed of chromoly steel for superior dexterity and spring
  • No-drill, clamp-on brackets can be adjusted along the trailer frame
    • Accommodates frame-mounted items such as gas tanks, toolboxes or generators
  • Desired tilt is achieved with traditional washer design
    • Add or remove washers from spacer rivet to tilt head up or down
  • Dipped steel construction is durable and corrosion resistant
  • Snap-up lever eases installation by reducing lifting required by trailer jack
  • System includes head assembly, adjustable shank, spring bars, sway control brackets, hitch ball, lift handle, pin and clip, and all necessary hardware
    • 1-7/8" Thin walled socket (EQ70-00-4800 - sold separately) recommended for hitch ball installation
  • Made in the USA


Specs:

  • Tongue weight: 800 lbs - 1,200 lbs
  • Gross towing weight: 12,000 lbs
  • Ball size: 2-5/16"
  • Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
  • Lift-bracket positioning: 27" - 32" back from center of coupler
  • Maximum trailer frame height: 6"
  • Shank length:
    • 8" From center of hitch pin hole to center of adjustment holes
    • 9" From center of hitch pin hole to front of shank
    • 7" From center of hitch pin hole to back of shank
    • 12" Overall
  • Total height adjustment along shank: 7-1/2"
    • Maximum rise: 7"
    • Maximum drop: 3"
    • Overall height: 9-1/2"
    • Holes are spaced 1-1/4" apart on center
  • Spring-bar dimensions: 35-1/2" long x 1-1/2" wide
  • Limited lifetime warranty


Dimensions

Included w/ SystemRequired - Sold SeparatelyOptional Add-Ons

90-00-1200 Equal-i-zer Weight Distribution Hitch

  • Weight Distribution Shank
  • Weight Distribution Head
  • 2-5/16" Chrome Hitch Ball
  • 2 Sway Control Brackets
  • 2 Spring Bars
  • Snap-up Lever
  • Spacer Rivet and Washers
  • Hitch Pin and Clip
  • Necessary Installation Hardware
n/a
  • Thin Walled Socket for Installation of Hitch Ball

Weight Distribution Diagram

Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.



Selecting a Weight Distribution System

The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.


To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.


Features of the Equal-i-zer

Head Tilt Adjustment

Controlling head tilt with traditional washer method

The Equal-i-zer weight distribution system uses the traditional washer-style adjustment method to achieve the perfect tilt. Controlling the head tilt helps you to fine-tune the leverage on your entire system, making it easier to install and hook up the spring bars. To adjust the tilt, simply slide washers onto the spacer rivet and insert the rivet into the head assembly. To increase the angle, add a washer. To reduce the angle, remove a washer. Most setups take four to six washers to achieve the proper height. Once you get the desired tilt, insert the shank bolts to secure the head to the shank and then tighten it in place.



Construction of Spring Arms

The Equal-i-zer spring bars are not made of traditional spring steel. Rather, they are constructed of a chromium-molybdenum alloy steel. Chromoly steel has a high tensile strength for extreme durability. It also features excellent dexterity, which allows it to give as required and then return softly back to its original form. This pliability is important in minimizing trailer bounce while still ensuring that the weight of your rig is adequately distributed.


Fixed Sway Control Brackets

Installation of Sway-Control Brackets

The unique sway control brackets of the Equal-i-zer are easy to install and simple to use. They clamp onto your trailer frame and conveniently adjust to a position anywhere between 27 inches and 32 inches back from the coupler. These brackets provide the attachment points for the weight distribution spring bars. To position the spring bars during hookup, simply use the included snap-up lever to lift each bar into place on the L-shaped brackets. Then secure the bars in place with the included L-pins and clips.


Equal-i-zer Hitch 4-Point Sway Control

The Equal-i-zer weight distribution system works to stop trailer sway before it begins. This is achieved through the rotational friction that is present in the weight distribution hitch itself. Within the system head, the downward pressure that is placed on the hitch ball by the trailer is combatted by the upward pressure exerted by the spring bars that are mounted in the sockets. This upward force is placed on the spring bars on either side of the system, creating the rotational friction that, essentially, forces your trailer in line. This type of friction is responsible for two points - one on either side of the trailer - of the 4-Point Sway Control. To ensure that enough tension is present, make certain that the socket bolts in the head assembly are torqued to at least 45 foot-pounds.


Points within the Equal-i-zer system where upward and downward forces interact to create rotational friction

The other two points of sway control are created by the steel-on-steel friction that occurs when the spring bars slide within the L-brackets that are mounted on the trailer tongue. Most traditional weight distribution systems have spring bars that are suspended by chains. Although this ensures that the system is not so rigid as to create bounce in the trailer, it also allows a good deal of side-to-side play in the system. Letting the spring bars hang freely minimizes the rotational friction described earlier. It also eliminates your system's ability to create the type of direct friction that has been shown to be so effective in limiting trailer sway.


This direct friction that is applied to the spring bars in the Equal-i-zer system helps to stop sway once it has begun. The concept is similar to the way in which an add-on friction-sway-control device functions. When each spring bar moves forward or backward, or side to side, it rubs along the bracket, creating friction. The resistance created by this action limits the movement of the spring bar, thus preventing further side-to-side movement of the trailer.


Most add-on units feature some sort of friction material similar to that used in automotive brakes. But the Equal-i-zer uses direct steel-on-steel contact to create resistance. This is the same sort of friction that is used with locomotives that pull loaded railcars weighing tons. No additional materials are needed. The steel will outlast any of those other materials, providing an extremely durable, functional sway control system.



EQ37120ET Equalizer Weight Distribution Hitch with Adjustable Shank and Hitch Ball - 12K

Installation Details EQ37120ET Installation instructions

Customer Satisfaction Score:


Customer Reviews

Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW - EQ37120ET

Average Customer Rating:  4.8 out of 5 stars   (756 Customer Reviews)

Steel-on-steel friction works to prevent and correct trailer sway in this unique weight distribution system. Sway control brackets ensure that your trailer stays in line with your tow vehicle. 2-5/16" Hitch ball and adjustable shank included.

by:

I have been using this EQ hitch towing my Bullet crossfire travel trailer with my F-150 for over a year now and it handles great. Tows smooth and without jerking or a rough ride. It took a few times to properly balance it and adjust it properly but what a major improvement from towing without it. I recommend this EQ hitch very much!!

Markg

1/24/2020

Excellent! I have towed over 5000 miles in 2 years with this hitch now and it is still like new. What a great purchase.



by:

Ordered the Equal-I-zer weight dist hitch as a reaplacement for original W/D anti-sway hitch trailer dealer sold me (was getting quite a bit of sway). Relatively easy to install, instructions were very easy to follow, getting a torque wrench (430 ft-lbs) for the ball had been my only concern. Weight distribution was right the first time, truck and trailer sit nice and level. The trailer tracked very well and there was no sway when being passed by large tractor-trailers. Less noise than I expected after reading reviews when researching hitches. Very happy with the hitch and the GREAT service from etrailer. Highly recommend.



by:

Was needing a weight distribution system for towing my 16' toy hauler and with Kats help from etrailer I couldn't be happier with this product. Trailer has a dry hitch weight of 950lb and 1100lb loaded. Set up took me an hour or so, but now I feel comfortable hooking and unhooking. Took it on a 100 mile trip a few weeks back in heavy rain with strong wind gust and handled great! Without it I didn't feel safe going 60mph on calm sunny day.



by:

I'm completely new to towing and the RV world. I searched high and low for a hitch that would make towing my 29 ft RV the least stressful as possible. I found this one but was still a little nervous about the whole experience.
Once it arrived in so many pieces I did get overwhelmed, but the videos and booklet provided truly helped a complete amateur put it together without issue.
And then once I drove with it, WOW!
I honestly forgot I was towing a 29ft RV at times. I had no issues turning and no issues handling. The weight distribution really did work. I even drove it in torrential downpour and had no issues with sway at all.
I am so impressed with this product and am so happy I found it. A true life saver for a beginner!!



by:

I purchased this hitch for a 9000lbs travel trailer with a 1001lbs tongue weight.
If your debating between a less expensive round bar and this setup, spend the money. This hitch is by far a better, easier, and safer setup.
I purchased this hitch to replace a Pro-series round bar with a friction sway control bar. The Equal-i-zer's 4 point sway control is big step up from a single point sway control system. The 1st drive felt secure and safe.

Install was easy, but time consuming for a 1st time installer. But worth it in the end.
Here's some pointers. 1. get the right tools, rent or barrow a the torque wrench to do the hitch ball 430ft/lbs, and shank bolts 320ft/lbs. The piece of mind that it's correct is worth it. 2. Plan for the afternoon, not a couple of hours. 1st setup is going to be close but your going to have to adjust it so plan on taking something apart. but setup is relatively easy, esp with the right tools. I had the trailer level the 1st go around to 2.5". So I had to move the head up one hole in the shank and then it was within 1". Distribution setup was still with in a proper setup, so I didn't have to make any further adjustments.
As far as the coupling and uncoupling the hitch. Using the tongue jack to release the tension is easy to do and quick. Esp. with an electric jack. I never liked the round bar with chain setup on my previous hitch.
High quality, easy install and setup, and seems to have great sway control.



by:

Hitch works perfect. I first used it to pull my 24 ft car hauler with my Yukon XL and it worked flawlessly. I upgraded trucks to a 2500 Duramax and reset the hitch for it and all is perfect still.

Great quiet hitch!



by:

I installed this hitch on my 2007 Toyota Tundra. I use to have the chain style. Big difference when getting next to rigs. This hitch is a much tighter tow. Glad I upgraded.



by:

This hitch setup is worth every penny. Install was not painful and instructions were clear. After setup was finished I took her for a spin and I was amazed at the difference. The ride was smooth and no sway!!!! No more friction sway control for me!! I would recommend this to anyone who is in the market for a WD hitch.



by:

The Staff at etrailer made the purchase simple and very helpful in picking the right tow package product. Installation instructions were sent when the product arrived. Great product n company!

Thank you so much Connie!



by:

This has been the second hitch I’ve ordered that didn’t come with the hitch ball when it says it does. Not sure if the description is inaccurate or if something has happened in transit both times (both times the box came damaged with a hole in it) , but I was able to order the ball separately and I love the hitch which is why I give the product 5 stars. I just hope the company sees this and figures out a way to prevent this from happening in the future.



by:

I love the stability of the Equal-i-zer 4-point sway control system. 15,000 miles and my tow vehicle and travel trailer have an "excellent relationship".



by:

I have been hesitant to review this product as I have had several issues with it....not necessarily the product itself, but my use and application. To start out, I should have used a different drop down hitch. The one that came with the unit does not allow the ball to sit low enough for the trailer to sit level once everything is set. Get the right amount of weight transfer and the nose of the trailer sits high which has a negative impact on towing. Less weight transfer for a level trailer means to more truck nose lift, dangerous sway, dangerous driving. The worst part is that if I had been aware and asked to change the hitch, it might have only cost me 10-20 dollars. Now I need to purchase a new hitch with a bigger drop, which will cost me around 150 bucks. I do believe that this will make a big difference. As I have gotten the setup closer to correct, it does seem to work well. I do however feel that the teflon plastic slide pads for the L brackets would be a worthwhile investment as it is noisy when making slow speed turns, which can be dis-concerting

Donny

2/1/2014

You realize that the friction where the spring bar slides in the L bracket is responsible for the sway control right? Reducing the friction would reduce the sway control of the unit... I am interested to try this product. I think what you are saying about getting the right set up for your individual rig is the most important thing.

Patrick B.

2/5/2014

The nylon jackets may very well reduce the sway control ability of the unit. For some applications, the reduction is sway control is not problematic and sometimes the noise is just too much. It is up to the user as to what they need more, but the jackets are available for those that want to get rid of some of the noise.


by:

We made a trip to the Pacific Northwest from Arkansas and I have to say, the hitch performed perfectly. Even in a high wind, which is common in Wyoming and the plain states there was no problem keeping a straight line going down the road. One time, when I wasn't paying attention and ran off onto the shoulder of the road, the trailer didn't sway at all but kept straight and allowed me to return to the road without incident. I would recommend this hitch to anyone pulling a trailer of any significant weight behind them. I have a 33 foot RV and pulling it with a 2015 Chevy Silverado 1500.

Ronald

2/11/2019

Its been over a year since I purchased my Equalizer hitch system and I am completely satisfied with it. Occasionally I have to spray some lubricant on the pivot points on the receiver end to keep the noise down but other than that It works as advertised and I would again rate it 5 stars.



by:

The Equalizer Weight Distribution System w/4 point sway control is as good as advertised. The installation took me approx 2.5 hrs and it was not difficult, just took a little time to make fine tuning adjustments to get the performance from the system that I wanted. The Equalizer System has removed an estimated 95% of the sway issue that I was having while pulling a 29 ft travel trailer with a mid-size Chevrolet Colorado pickup. Looking forward to getting out on the road and giving it a thorough testing, but so far it meets my expectations.

Jim H.

7/6/2018

This hitch was a great investment!! It has made a huge difference in how my trailer handles in the Texas winds. I used to get white knuckled every time that I set out on a trip with my previous chain hitch and seldom ever felt comfortable in pulling the trailer at speeds in excess of 45 mile per hour. Now I can move along at normal Dallas freeway speeds in comfort. This hitch was a welcomed addition to my RV experience.



by:

Heavy duty hitch, very good quality, easy set up. Did a lot of research, and I'm glad I chose this hitch. Thanks etrailer.com

Joe

1/25/2020

After using this hitch for a year now, Im still glad I chose it. Its a heavy duty hitch, and heavy to handle, but worth every penny. It makes towing our travel trailer a breeze.



by:

Biggest Pros:
- Easy to install initially
(though I did have to buy a special socket, 1 7/8, to hook up the ball, so this could be a con too. A wrench won't work)
- It really does do a great job of stabilizing the trailer going do the road)

Biggest Cons:
- Weights around 100 lbs and has actually threw my back out trying to hook it up.
- Hard to connect stabilizing bars, as well

That said would not buy again or recommend, am currently looking for a better solution. The Doctor bills alone could cover a much more expensive unit. Not to mention the pain!!! Together these reasons are enough for me to NOT recommend!

NOTE: I am a 38 year old man that exercises and lifts weights at least 5 days a week, usually 7; my life revolves around the gym. I say this only so you believe me - This thing is heavy and awkward.

SAVE YOUR BACK - GO A DIFFERENT ROUTE



by:

All good with this hitch! We have pulled in high cross wind without much noticeable sway. Our truck and the trailer are level. After I learned the trick of raising the tongue a little above horizontal, I can install and remove the arms without using the cheater bar. I had to adjust the hitch after I traded trucks but it was a simple thing and took very little time. We've had people stop to look at it because they were tired of using the hitches with chain adjustment. Couldn't be happier. The support from etrailer staff is great.



by:

Ordered Equalizer hitch assembly on line. Best price and free shipping. Weighed over 100lbs! Got to my house as stated in 3 days! I use them all time!



by:

Great product except for one thing. If you are going to sell this hitch either sell it with ball already attached or include the 1 7/8 thin wall socket with it. Could not find socket anywhere locally and finally had to dismantle Equilizer bar sockets which is no easy task , and then use regular socket that I already had, what a pain. Other than that great service and ultra fast shipping. I think I ordered it Tuesday night and had it Friday night. Great job.

Will repost once all is installed and try it out.

Jeff P.

7/23/2017

Best hitch on the market for anti sway and load equizling. Quick hook up, love it!



by:

12000 lbs. hitch was a great improvement over my previous bent bar hitch with chains. Trailer sway has decreased a lot. MY 35 foot trailer pulls straight except when it is windy. I am no longer bothered by passing vehicles. Was noisy until I added the nylon pads from equalizer. Much quite now.

Etrailer Expert

Mike L.

3/6/2019

Keep in mind that the jackets or pads will decrease the effectiveness of the sway control to a degree because they limit some of the metal-on-metal friction which provides the sway control.



by:

I received this hitch about a month ago and couldn't install right at first due to some issues I was having but I have finally got it installed and set up right. This is great! I will go on my maiden voyage Memorial weekend but I'm sure it is going to perform as expected. Excellent price that no one can touch. Instructions are easy to follow and detailed the way it should be. Time, was about as expected, so don't rush because you don't want to miss any steps.

Herman S.

11/7/2017

Well I have owned this hitch for a year and it has worked flawlessly. In July we took our camper on a 2000 mile trip and we had no issues with the hitch at all. We were in all types of traffic through large and small cities, we didnt have any sway issues because the hitch, now broken in, works much better than I knew it would. I had installed the pads under the slide bars and use the grease to quieten it down when in all the turns I made during this trip. I dont believe there is a better hitch out there that can tame my 38 ft 9000lb Jayco than this Equalizer. Best money spent here. 11/7/17



by:

Hadn't had a chance to use on road yet, but look like a very high quality product. Installation was very easy! Only took a couple hours to get installed and adjustments made. Watching video on etrailer.com will help, but included instructions are also pretty easy to follow. Shipping was extremely fast! Ordered on a Wednesday and it was at my door in south Georgia by 1:00 pm on Friday.

Don H.

4/24/2018

Very pleased with this hitch system after 1 yr of use. Did have to make one change to it, but that was not due to product defect. Originally ordered it with a 2 shank and later purchased a truck with 2.5 receiver. Tried using an adapter sleeve, but did not like the excess play with the sleeve. Felt more sway when towing. Was also a hassle to get 3 sets of holes to line up for hitch pin! Purchased a new 2.5 shank and all is good again!!!



by:

Works great. We live in the mountain area of East Tennessee. I hit mountains no matter which way we travel. Been to Western New York to Central Florida. No problems.



by:

I cannot rave enough about this set up. I tow about a 10K trailer (RV when fully loaded) with a Ford F150 (yes an F150... but it was built for towing heavy and in fact, is actually rated better than my F250 Super Duty to tow heavy).

But it is working hard, no doubt and with this hitch I really cannot tell the trailer is there. In my humble opinion, best on the market, even tows better than my goose neck did.

I have put the same set up on my 4 horse trailer and will do so for my car hauler soon.



by:

This hitch has been great! No complaints and no regrets at all. It does a great job of anti-sway, which was my main reason for purchasing the Equalizer over other weight-distribution hitches. I did a bunch of research before purchasing this, and the majority of the reviews were very positive. This is also my sentiment in my experience of using it over the past year. You just need to make sure it is installed correctly and setup properly, otherwise your experience could be different. It's not difficult, just read the instructions and double check what you're doing. Once it's setup properly, you'll never have to touch it again.


25
751
Show More Reviews

See what our Experts say about this Equal-i-zer Weight Distribution Hitch

  • Weight Distribution Recommendation for a 2006 Cedar Creek Silverback with 11,013 lb GVWR
    Hey Glen, thanks for reaching out! The 12K Equal-i-zer Weight Distribution System # EQ37120ET will work but you'll have to be pretty careful to load your trailer so you only have 10% of the weight on the tongue. Since the ideal loaded tongue weight is 13% the weight of the trailer I actually recommend going with the the 16K model # EQ64FR so you have a little wiggle room to deal with and your tongue weight should fall in the middle of the 1,200 lbs - 1,600 lbs range this system is rated for.
    view full answer...
  • Best Weight Distribution Hitch for a Big Tex 14ET-22 Trailer
    Yes, the Blue Ox 2-Point Weight Distribution w/ Sway Control - 6-Hole Shank item # BLU75FR will work with a 6" C channel trailer frame like the one on your Big Tex 14ET-22. This system only has 2 point sway control and is the lowest model Blue Ox offers so you shouldn't have high expectations for it. With the weight of your trailer you will still experience a decent amount of sway. Instead, I recommend the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW,...
    view full answer...
  • Weight Distribution Recommendation for Horse Trailer with 2-5/16 inch Ball and 950 lb Tongue Weight
    Since your coupler requires a 2-5/16 inch hitch ball that is the size ball you'll need installed on the weight distribution system you go with. You'll need to go with a higher rated weight distribution system for when the trailer is loaded like you mentioned at 950 lbs of tongue weight. So for that you'd want the Equal-i-Zer kit part # EQ37120ET which has a tongue weight range of 800-1,200 lbs and comes with the correct hitch ball size of 2-5/16 inch.
    view full answer...
  • How Does a Weight Distribution System Work
    The way that weight distribution works is that it uses the tongue weight to put tension on spring bars that essentially then push upward at the ends to better distribute the weight. The tongue weight is still there and only marginally affected. It isn't a huge drop like some people believe. I often use the example of a spring placed between two blocks with a weight hanging from the spring. The weight is always there. The physics aren't exactly the same but that is generally what is going...
    view full answer...
  • Choosing an Equal-I-zer Weight Distribution System for Camper with 950 Pound Tongue Weight
    Since it is likely that your trailer's tongue weight will likely end up around 950 pounds when it is fully loaded and ready to tow, and with an additional 100 pounds behind the rear axle in the bed of your truck, I recommend going with the larger 12,000 pound towing, 1,200 pound tongue weight rated Equal-I-zer Weight distribution system # EQ37120ET. With the total tongue weight coming in right at, or even possibly above, the capacity of the 1,000 pound system, the higher rated system...
    view full answer...
  • Recommended Weight Distribution & Sway Control System for 2013 Crossroads Travel Trailer
    Selection of a weight distribution/sway control system (WD/SC) requires that you know the trailer's actual fully-loaded TW, with all your gear and supplies loaded and filled propane and water tanks. To this you need to add the weight of anything in the truck bed that sits behind the rear axle, such as a loaded cooler or generator, as this weight also acts like TW. We offer a handy TW scale, the # e99044, but other methods for measuring TW are outlined in the linked article. Once you know...
    view full answer...
  • Recommended SumoSprings for a 2013 Ram 1500
    Yes, SumoSprings would help to address the sagging and squatting you are experiencing in your 2013 Ram 1500. I recommend the SumoSprings Solo Custom Helper Springs item # SSR-307-47. These springs have a 1,500 lbs capacity that will easily handle the tongue weight of your Whitehawk Trailer. These springs work by using progressive load control. The springs compress according to the weight of your cargo. Basically the more weight put on them the more they are engaged. When you are not towing...
    view full answer...
  • Recommended Weight Distribution System For 800-1100lb Tongue Weight Compatible With 8" Trailer Frame
    I have another option for you, but since the frame on your trailer is 8" tall you will not be able to use an Equal-i-zer weight distribution hitch like the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW # EQ37120ET as it can only accommodate frames up to 6" tall. Instead I recommend the Reese Weight Distribution w/out Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW # RP66022 with the Chain Hangers for Reese Weight Distribution Systems...
    view full answer...
  • Best Weight Distribution System for 7700 lbs. 26 Foot Dutchmen Travel Trailer
    To choose a weight distribution system we need to know the weight of your trailer, which you said has a maximum of 7700 lbs. and your combined tongue weight (TW). The TW of your trailer is usually about 10-15 percent of its total weight when loaded so we can approximate this to be at most 1100 lbs. To get your combined TW you'll add the amount of weight in the back of your Jeep that is behind the rear axle. Once you have that number you can start looking at weight distribution systems. Based...
    view full answer...
  • Weight Distribution Hitch For a Travel Trailer With Underslung Coupler and Tongue Weight 1000-1200lb
    You will have 2 choices that will fit your current travel trailer. The Equal-i-zer Weight Distribution System # EQ37120ET is rated for tongue weights of 800-1,200lbs and a trailer weight up to 12,000lbs. The Equal-i-zer Weight Distribution System # EQ37140ET is rated for tongue weights of 1,000-1,400lbs and a trailer weight up to 14,000lbs. You will need to choose the one that best suits your travel trailer weights as well as any future trailers that you may want to use with this...
    view full answer...
  • Recommendation for Reducing Rear End Sag On 2017 Ram 1500 Hauling a 12,000LB Dump Trailer
    Using the Equal-i-zer Weight Distribution System # EQ37120ET when connecting to your Griffin GT-712 dump trailer is going to be the best way to reduce rear end sag and make driving loaded much safer. This particular hitch is rated for a trailer up to 12,000lbs with a tongue weight of 800-1,200lbs. The Equal-i-zer help to transfer weight more evenly across your 2017 Ram 1500 so it will reduce rear end sag while also adding weight to the front suspension which will help reduce diminished...
    view full answer...
  • Comparing the Husky Centerline TS To The Equal-i-zer Weight Distribution System
    The Husky Center Line Weight Distribution w/ Sway Control - Trunnion - 12,000 lbs GTW, 1,200 lbs TW # HT32218 is considered to be a 4 point friction sway control system like the Equal-i-zer # EQ37120ET. The Husky system like many others have a very similar design to the Equal-i-zer system. The difference is the round bars that transition to more rectangular on the ends where the brackets meet. The brackets are two of the friction points and the other friction points are at the head...
    view full answer...
    Image 1 for
  • Comparison And Recommendation For Weight Distribution And Sway Control Needs
    The Equal-i-zer brand has been around for a long time and is considered a top line for weight distribution systems. They have great products that do what they say they do and do it for a long time. Equal-i-zer systems use a 4-point sway control with 2 points where the spring bars insert into the head and 2 more points where the bars use friction on the brackets installed on the trailer's frame. Equal-i-zer systems are also made right here in the USA. The Husky CenterLine systems have...
    view full answer...
  • Recommended Weight Distribution System for 2013 Ford F-150 Super Crew 4x4 and Grand Design Trailer
    The Equal-I-zer Weight Distribution System I recommend for your 2013 Ford F-150 Super Crew 4x4 with 3.5L Eco Boost and your Grand Design 297 travel trailer is the Equal-i-zer # EQ37120ET based on the weights you gave. The WD system is rated based on total tongue weight which is the loaded tongue weight of your trailer along with any cargo behind the rear axle of your truck. This system is rated properly to accommodate your truck and your trailer within the max towing capacities of your...
    view full answer...
  • Best Equal-i-zer Weight Distribution System for 9k GVWR Travel Trailer
    The tongue weight range for the # EQ37140ET is 1,000-1,400 lbs and I'm assuming this is the system you're referring to. We recommend measuring your loaded tongue weight of your setup to see if it will fall in that range. Even with 800 lbs as your dry tongue weight, the system may be overrated. The sway control would work, but an overrated system could cause a rough ride and bouncy trailer. If you measure and find that it does fall into that range then you are good to go. I also see you...
    view full answer...
  • Can a Trailer with an Equalizer Weight Distribution System Be Backed Up with Spring Bars Installed
    The Equalizer Weight Distribution system part # EQ37120ET does allow you to back up without having to disconnect anything. As long as you aren't jackknifing the trailer this system can be backed up without any issues. If you did need to make some tight turns while backing you would need to disconnect the spring bars.
    view full answer...
  • Rear Suspension Enhancement For A 2019 Toyota Tacoma Sport
    For rear suspension enhancement on your 2019 Toyota Tacoma I recommend the SumoSprings Solo Custom Helper Springs - Rear Axle Item # SSR-612-47. These spring are a light duty jounce style spring to help reduce the feeling of the vehicle bottoming out when weight is added. Keep in mind adding these does not increase the weigh carrying capacity of the vehicle. It is also recommended when hauling a travel trailer to use a weight distribution system. I recommend the Equal-i-zer Weight Distribution...
    view full answer...
  • How to Choose Correct Weight Distribution Hitch for Keystone Springdale 303BH Travel Trailer
    The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37120ET has a tongue weight range of 800 lbs - 1,200 lbs so if that 1,000 lbs you referenced is with the trailer loaded and ready for a trip then you'll be in good shape as long as the cargo behind the rear axle of your 2008 Dodge Ram 2500 doesn't exceed 200 lbs (since loaded tongue weight and behind-the-rear-axle cargo weight play into weight distribution tongue weight). If this combined tongue weight rating is just...
    view full answer...
  • Trailer Hitch Extension For Truck Towing A Trailer and Truck Bed Camper
    I have a few suggestions for you, but we do not carry a trailer coupler that is longer than the Fulton 44150C that you already have. The simplest solution would be to replace the Convert-A-Ball cushioned ball mount that you currently have with an extended ball mount like the Curt Multi-Ball Adjustable Ball Mount, # D900. This ball mount is about 6 inches longer than most Convert-A-Ball ball mounts. Since I'm not sure what amount of rise or drop you need, I've attached a link to all of...
    view full answer...
  • Selecting a Weight Distribution Hitch For a 1999 Carriage Cameo M26-FLS Travel Trailer
    The only weight information I could find on your 1999 Carriage Cameo M26-FLS is 5,620lbs which is the weight of the travel trailer when it left the factory. You will want to have the tongue weight verified by either using the Scale # e99044 or finding a local scale you can take the trailer to have weights checked. Based on the dry weight of the trailer you will want either the Equal-i-zer 10,000lb or 12,000lb. I have listed the tongue weight ratings for both the hitches below. I prefer...
    view full answer...
  • 48" Hitch Extension For Towing a Trailer Behind a 2023 Chevy Silverado 3500 With Slide In Camper
    We have the TorkLift SuperTruss Hitch Extension # TLE1548 which will require you to have a TorkLift SuperHitch Magnum Trailer Hitch Receiver # TL74FR on your 2023 Chevrolet Silverado 3500. This extension with the Torklift receiver is capable of towing a trailer up to 6,000lbs with 600lbs of tongue weight. If you add a Weight Distribution Hitch # EQ37120ET you will be able to tow up to 12,000lbs with a tongue weight up to 1,200lbs. You will need a TorkLift Wiring Harness Extension # TLW6048...
    view full answer...
  • Recommended Weight Distribution System Without Friction Sway Bar to Allow Backing Up
    The Pro Series Weight Distribution System # 49570 is compatible with backing up at any angle unless you add the friction sway bar # 83660. There is an easy disconnection pin to allow you to easily back up with the rest of the system still installed, but it could cause damage if you didn't disconnect that sway bar and backed up at any angle. For a system that is rated similar and will allow backing up without any changes required to the system, I recommend the Equal-i-zer Weight Distribution...
    view full answer...
  • Selecting Weight Distribution System for 7500-lb GVWR Travel Trailer
    They best way to choose a weight distribution system is to know your specific trailer's actual loaded tongue weight (TW) and to this to add the weight of any cargo behind the rear axle of the tow vehicle, as you noted. Tongue weight scale # e99044 is the easiest way to measure the loaded trailer. A properly loaded trailer's TW should be about 15% of the gross weight, so a 4500-lb trailer should have TW near 675-lbs. A 6000-lb trailer's TW should be close to 900-lbs. You want to choose...
    view full answer...
  • Trailer Hitch Rated for 10K Towing for a 2003 Dodge Sprinter with 140 inch Wheelbase and DRW
    The Curt Class IV Trailer Hitch # 14250 will only fit if your 2003 sprinter has the 140 inch Wheelbase with Single Rear Wheels. Since you have a 140 inch Wheelbase with Dual Rear Wheels the next best option is the Curt Class III Trailer Hitch # 13265 which is rated for 6K Towing/600 lbs Tongue but then jumps up to 10K Towing/1K Tongue when used with a weight distribution (WD) system like the Equal-i-zer w/ 4-Point Sway Control # EQ37120ET. Please note that your Sprinter must be rated for...
    view full answer...


< Previous
123. . .21



Do you have a question about this Weight Distribution Hitch?


Info for this part was:

Employee Dan D
Updated by:
Dan D
Employee Kathleen M
Updated by:
Kathleen M
Employee Laura H
Updated by:
Laura H
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Hannah L
Updated by:
Hannah L
Employee Mike S
Updated by:
Mike S
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.