Weight Distribution Hitch For a Travel Trailer With Underslung Coupler and Tongue Weight 1000-1200lb

Updated 05/13/2021 | Published 05/11/2021

Products Featured in This Question

Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW

(840)

$863.09

1-7/8" 12pt Shallow Socket - 3/4" Drive - Chromium-Vanadium Steel

(279)

$19.34

Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW

(840)

$696.91

Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems - Qty 2

(269)

$25.94

Question:

I tow a travel trailer with an underslung coupler and a measured tongue weight between 1,000 and 1,200 lbs. what equalizer setup would be most appropriate for my situation?

asked by: Casey E

Helpful Expert Reply:

You will have 2 choices that will fit your current travel trailer.

The Equal-i-zer Weight Distribution System # EQ37120ET is rated for tongue weights of 800-1,200lbs and a trailer weight up to 12,000lbs.

The Equal-i-zer Weight Distribution System # EQ37140ET is rated for tongue weights of 1,000-1,400lbs and a trailer weight up to 14,000lbs.

You will need to choose the one that best suits your travel trailer weights as well as any future trailers that you may want to use with this hitch. Be sure to see the section of the instructions for an underslung coupler, you will need to flip the frame brackets upside down to allow you to install the sway brackets correctly.

To install the ball on the hitch, you will need a 1-7/8" 12pt Thin Walled Socket # ALL643216. And I recommend using the Sway Bracket Jackets # EQ95-01-5150 to cut down on the noise from the hitch as well as extend the life of the components.