Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW
(96 reviews)
Price: $444.00
In Stock
Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW
Item # C17422
Retail:$681.95
Our Price: $444.00
You Save: $237.95
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (96)
- Q & A (0)
- Photos
CURT Weight Distribution Hitch - C17422
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- Fits 2 Inch Hitch
- WD With Sway Control
- Does Not Allow Backing Up
- CURT
- Electric Brake Compatible
- No Sway
This weight-distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Shank and pre-attached, pre-torqued 2-5/16" ball included.
Features:
- Evenly distributes weight over axles of tow vehicle and trailer for stability and control
- Creates a more level ride for both tow vehicle and trailer
- Friction sway control reduces sway caused by winds, curving roads and sudden maneuvers
- Adjustable tension lets you create the perfect degree of control and resistance
- Integrated handle engages and disengages the system
- Removable - just release 2 spring locking pins
- Trunnion spring bars are constructed of solid, forged steel for strength and durability
- Bars are shorter than those in standard systems to accommodate your short-tongue trailer
- Adjustable spring-bar tension - just switch links in lift chains to fine-tune
- Desired tilt is achieved with traditional washer design
- Add or remove washers from spacer rivet to tilt head up or down
- Powder coated steel resists corrosion
- Snap-up lever eases installation by reducing lifting required by trailer jack
- System includes head assembly, adjustable shank, 2-5/16" hitch ball with 1-1/4" diameter shank, sway control bar, spring bars, lift brackets and chains, snap-up handle, pin and clip, and all necessary hardware
Specs:
- Tongue weight: 1,000 -1,500 lbs
- Gross towing weight: 10,000 - 15,000 lbs
- Application: 2" x 2" trailer hitch receivers rated for use with weight-distribution systems
- Shank length: 12"
- Maximum drop: 1/2"
- Maximum rise: 7-1/2"
- Spring-bar length: 28-3/8"
- 1-Year limited warranty
Note: Will only work with overslung couplers.
| Included w/ C17422 | Optional Add-Ons |
|---|---|
|
|
Create a stable ride for your tow vehicle and trailer with a weight-distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.
Selecting a Weight-Distribution System
The tongue weight rating is the most important factor in determining which size weight-distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.
To determine the proper weight rating for a weight-distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight-distribution system.
17422 Curt Weight Distribution Hitch - Trunnion
Installation Details
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Arrived Damaged
- Manufacturer issue
- Product did not meet expectations
Customer Reviews
Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW - C17422
Average Customer Rating: 4.7 out of 5 stars (96 Customer Reviews)
This weight-distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Shank and pre-attached, pre-torqued 2-5/16" ball included.by: Garrett06/30/2023
Well, where do I start? First of all etrailer did not place the correct address on my shipment. They left out two very important lines. Secondly I had to call to get a copy of my invoice. They didn’t send it at the time of my order. Good thing I took a picture of the order number.
Next? Changing or adding to an address with UPS while the package is being shipped? Impossible! So I took the tracking number to the loading facility of my location 75 miles away and the super cool driver supervisor at UPS took my information and made sure I received my shipment.
Now… yes it arrived but like I’ve seen in many reviews the box was a mess! It has at least a roll or two of packing tape all over it to keep it together. I don’t know yet if I’m missing any parts. I won’t have time to look till next week. I can not imagine UPS would accept a box in this condition so I’m pretty certain the damage happened in transit. Bottom line IMHO Curt manufacturing needs to be held to account for this. If you’re boxing up something that weighs 120 pounds make sure your packaging is up to the task.
Would I order from etrailer again? That remains to be seen. Am I happy with my purchase? Don’t know yet, I need to install it. In this case I’m broke down in the middle of nowhere with a broken hitch that was supplied with my trailer that is very possibly too light for the trailer.
The saga continues! If all goes well with the install and the operation of the hitch then I’ll be happy. Just a BTW… I’ve seen reports that this hitch works fine till it breaks. Finding a bumper pull hitch for a 15,000 pound trailer is not as easy as one might think.
by: F11/29/2021
This how the box showed up with just a couple of pieces left in it. Then they act like they are doing you a favor to replace it. Package it right before you ship it.
Sierra K.
12/1/2021
I apologize for the inconvenience. Customer Service will be helping you with this issue.
by: Ewen Alexander04/26/2019
I’m using this hitch on a two axle 20 ft car hauler that has a bit too much tongue weight when carrying a full size pickup. It works perfectly for this & is quick & east to remove & install.
Ewen A.
4/27/2020
Very well
by: Guy02/27/2023
Installed on horse trailer for stability with cab over while towing horse trailer.
by: Trevor03/08/2019
I had a fastway e2 trunnion 12k pound hitch and hated it. It was great if you didnt need much pressure on the bars and always hooked up while on flat even ground. Most times I had to use a 3 foot prybar to get the weight transfer bars off the trailer and a 3 foot cheater bar to get the bars on!!! This 15k pound hitch from curt is great!!!! The welds could be better (pretty picky I'm a fabricator by trade) but nothing beats this style hitch. It may take an extra step if you want the friction brake but it is worth it. I run 2 friction brakes as I have a 38ft travel trailer and is pretty much a giant sail. The trunnion hitch couldn't handle that camper in the wind and there wasnt a way to adjust the bars for a windy day. but this hitch with 2 brakes works great. Dont always need 2 brakes but I like the option for when its windy out and we have a 2 hour drive on the expressway!!!
by: Daniel 08/03/2022
One year later, working great. Good quality. I didn't use the lift brackets because I have a race trailer that had them already welded on. Glad this system worked with the existing welded-on setup of my trailer. E-Trailer was great helping me figure that out among all the different styles available.
by: StanleyT04/07/2021
This weight distribution system and sway bar made a world of difference hauling heavy loads in my Big Tex 7'x14' dump trailer. We have hauled many heavy loads long distances through the curvy Mountain roads of central Oregon. Definitely levels my F250 4x4 pickup/Big Tex-7'x14' dump trailer combination and prevents the scary sway that we experienced on our first trip. We found that even the occasional high winds we experienced on two trips did not create a problem. The peace of mind and safety for us was/is worth every penny of the very reasonable purchase price. I was unable to use the standard chain hangers that came with the distribution system because of the battery and pump box location. The optional bolt on chain hangers worked great for me.
by: Carlos04/22/2022
The delivery was bad.
Jenny N.
4/27/2022
I will have our Customer Service team reach out to you.
by: Jack S.05/12/2015
I received my knew curt distribution hitch the other day. The shipping time was fast, in fact faster than expected. I put the few parts together on the truck and was pleased with the quality. I bought a new trailer and my old system was a little under rated. The curt hitch should work fine.
by: Jason L.01/18/2017
This is an outstanding weight distribution system. I am fully pleased with it. I use it for towing my 2016 Grand Design 327RLTS. The tongue weight is rated at 1150lbs. I am certain it's closer to 1450lbs, but for this system it's no problem at all. I have no complaints and for the price it was the best buy on the web. Thanks.
by: Steven02/11/2019
Ordered a weight distribution hitch with sway control. Hitch arrived on time and in good condition. Installation went well, and the hitch works perfectly. Very pleased.
by: Shawn B.10/19/2015
Ridiculously fast shipping and a perfect price! Arrived in good condition. Installation instruction were simple to follow. The actual product information from CURT as to the specific dimension as an overall unit (i.e. mechanical drawing) would be helpful to determine if the product works correctly for your trailer. Enough was provided that I took a chance but we did have to raise my AC unit on the front of my trailer 2.5" and move one of it's support bars back in order to install the weight distribution system. Not at all any fault or any concern of Etrailer, but just wanted to share this note in case other have a propane rack or something else on their tongue.
by: Mark03/18/2017
Great weight distribution hitch and sway control bar. Drove from Texas to Alaska with ease and no issue. Love this hitch
by: ARMJR 04/20/2017
I have done business with etrailer before and always have had excellent service. This particular time I had an issue with ordering and Troy was very helpful in resolving the problem and my Weight distribution hitch arrived two days later. I also had some questions which the experts at etrailer answered quickly.
I have installed the hitch but have not traveled with a loaded trailer but do not expect any issues.
by: Don G.04/11/2019
I purchased this to pull a small trailer with our 2014 Ford Explorer. I cannot express what an improvement this made in the handling characteristics.
I would never not use one again.
by: Peter04/08/2022
Item was delivered had a minor issue with item Melissa from costumer service was the best at taking care of the problem. Very satisfied I have ordered from here in the past and will be using ETRAILER again Thank you Melissa for all your help .
by: Duane Gourley05/31/2017
Your equipment is the best easy to install and looks good. Took all the movement out of the car trailer. I haul a 18 foot car trailer loaded to the max.
by: Kevin05/08/2016
Gr8 work and follow through. I had to cancel a order from JC whitley after being jerked around and I cancelled with them and and called you. U guys helped me out and got it done, thanks
by: Greg08/30/2015
Product is exactly as advertised. Complete and very easy to install by following the included instructions, and of course this all backed the impeccable customer service provided by etrailer and their customer service team !
Will continue to use etrailer for any and all towing needs.
by: Jesse K.06/12/2015
This item was easy to install took less than a hour. Made a huge difference pulling 33ft travel trailer. Leveled out truck and can pull at 70mph with little sway.
by: Susana Taboada04/28/2016
This order was delivery today, thanks for your prompt delivery I will write back to you after we try the product so far is still in the box......as soon we work on it I would sent pictures and finish my review.....Thank you again
by: Paula T06/20/2015
So far so good.. the instructions could be a little more thorough. Etrailer.com had awesome customer service..very quick delivery!
by: Mark10/30/2017
Product arrived intact with all parts. No complaints with item, though have not used yet. Excellent support through etrailer.com.
by: Hans R.02/27/2016
Product arrived sooner than I expected! Appears to be a well made product. I'll be installing it soon on my 24 Ft. Boles Aero trailer and testing it out.
by: Art02/26/2018
Received full product as described. Box arrived in rough shape but product is fine and complete. I am very happy.
Art L.
2/26/2019
Great
25
96
Show More Reviews
See what our Experts say about this CURT Weight Distribution Hitch
- Replacement Spring Bars for Curt Weight Distribution System C17422 Rated for More Trailer WeightYes, you can substitute different weight distribution spring bars for the times your trailer is unloaded versus loaded up with your ATVs. The Curt Short-Arm Weight Distribution System # C17422 comes with bars rated to handle from 1000-lbs up to 1500-lbs of trailer tongue weight (TW). You can substitute the 800-lb rated spring bars part # C17308 for towing the empty trailer with 600-lb TW..
view full answer... - 1,200 Pound Spring Bars for Pro Series Weight Distribution SystemThe 1,200 pound Pro Series round weight distribution spring bar is # 58338 but will not fit the head of the system you have. Since your tongue weight is greater than 1,200 pounds then going to a 1,200 pound bar would not work anyway. You would need a system rated for 800 to 1,500 pounds tongue weight, # RP66131, or one rated up to 1,500 pounds like # C17422.
view full answer... - Can the Curt Weight Distribution System with Sway Control be Set Up to Allow Backing UpTo be able to backup your trailer while the Curt Weight Distribution System with Sway Control, Trunnion Bar # C17422 is installed on the Yukon XL and the trailer, you will want to disengage the friction sway control bar. The sway control bar is the aspect of the system that requires the warning to not back up while the system in installed because it could be damaged in the process of backing up if the trailer were to turn too sharply. If you will need to execute a sharp turn while backing...
view full answer... - Recommended Receiver Hitch and Wiring for 2013 Chrysler Town and Country Towing a TrailerFrom information available to me online, your 2013 Chrysler Town and Country has a maximum towing capacity of 3,600 lbs. You will want to verify this against the specs in your vehicle specific owners manual. I will assume this is a camping trailer that you list at the 3,500 lbs. and it is a max weight, not its dry/unloaded weight. So, yes it appears that although you will be on the upper edge of your vehicles towing abilities, you can do so. I recommend the etrailer Trailer Hitch Receiver,...
view full answer... - Recommended Weight Distribution Shank For Curt Short-Arm System On 2014 Lifted Silverado 1500Curt Weight Distribution Shank - 13" Long - 9" or 10" Drop - 1,500 lbs TW # C17124 is what I recommend for your 2014 Chevy Silverado With 6 Inch Lift and 35 inch tires. This shank is for a 2 inch trailer hitch receiver and will work well with the Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW # C17422 you referenced. These parts work well together and are the best option for your application.
view full answer... - Can You Back Up with a Curt Weight Distribution System InstalledWith weight distribution systems like the Curt part # C17422 you can backup as long as you mainly are going straight back. If you find yourself in any jackknife situations you would need to disconnect the bars and the sway control unit. A good rule of thumb is that as long as you aren't ending up in a tighter turning situation that you could get yourself into going forward then you will be fine in reverse.
view full answer... - Can Timbren SES be Used for Towing a Car Hauler with a 2012 Ram 1500While the Timbren Rear Suspension Enhancement System (SES) # TDRTT1500 will help to level out the ride while towing with your 2012 Ram 1500, it won't act in the same manner as a weight distribution (WD) system. The reason is because the SES simply pushes everything into place while a WD system actually distributes the loaded tongue weight between all of the axles in the towing setup so there is less strain on your vehicle. If you don't have enough room for a WD system then the Timbren...
view full answer... - How to Install Curt Weight Distribution System on Trailer with Propane Tank InterferenceWhat you would need is the part # C17005 to go along with the part # C17422 which will allow you to bolt the brackets to the side of the trailer frame and would avoid the propane tank interference. The sway control won't be an issue either since it bolts to the side.
view full answer... - Recommended Weight Distribution System for V-Nose TrailerThe issue with adding a weight distribution system to your trailer is that there isn't a lot of room for installation due to the V-nose. But I may have a solution for you. To choose the properly rated system you need to find your total tongue weight. That is the tongue weight of the loaded and ready to tow trailer added to the weight stored behind your van's rear axle. Once you have that figure you'll also need to measure your trailer's tongue to find out how much space you have for...
view full answer... - How Are the Curt Short-Arm Weight Distribution System Spring Bars Measured The spring bars included with the Curt Short-Arm Weight Distribution System with Sway Control part # C17422 are actually 28-3/8" long. This measurement is taken from the end of each bar with the knuckle removed. The distance from the end of the bar to the center of the pin on the knuckle is going to be 28 5/8" which you can see in the attached photo. I called Curt to confirm this for you.
view full answer...
- Curt Weight Distribution and Sway Control for a 1999 Dodge Ram 2500 and 4,400 Pound TrailerTo choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. Trailer tongue weight is typically 10 to 15 percent of the gross trailer weight. For a trailer weighing 4,400 pounds that would be 440 to 660 pounds. Curt system # C17422 is rated too high for this tongue weight...
view full answer... - Recommended Short Arm Weight Distribution Hitch for Trailer with 1400-lbs of Tongue WeightI have a solution for you, but the Curt MV # C17057 that you've currently got won't accept the new components you're wanting to turn your system into a short arm weight distribution hitch. For this reason, you'll need to get a completely new weight distribution hitch. The shortest weight distribution system we have is the Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW # C17422, which has 28" long arms and is similarly rated to your # C17057....
view full answer... - Where on Trailer's Frame do the Brackets of the Curt Short-Arm Weight Distribution System InstallThe spring bars of the Curt Short Arm Weight Distribution # C17422 are 28-3/8 inches long. So the brackets will be approximately that far from the hitch ball on your trailer's frame. You also want to find the exact tongue weight of your trailer when it's loaded. Then add that to any weight you've put behind the rear axle of your 2016 Ram 2500. You want that number to fall within the range the system is rated for. The Curt system is rated between 1,000 to 1,500 pounds of tongue weight....
view full answer... - Can Curt Short Arm Weight Distribution be Used on Trailer With 28 Inch TongueAppreciate the photo, and yes you can, but you'll need to use bolt-on chain hangers if there is interference that won't allow the brackets to mount to the top of the tongue 28" back. So you'd need to bolt on the chain hangers to the side of the frame (or the side of the trailer frame just behind the tongue if that is where you are measuring 28 inches) in order to use the system. Here is what you'd need: - Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K...
view full answer...
- Weight Distribution and Sway Bar for 24 Foot Enclosed Trailer with Limited Tongue LengthFor your short tongue on your new trailer, I recommend the Curt Short-Arm Weight Distribution systems with sway Control. This will give you the friction sway bar that will help control sway, but will need to be disconnected prior to backing up. I've attached an article to assist. If the hanger locations won't allow the brackets, you can use the Chain Hangers for Curt Weight Distribution Systems - Bolt On # C17005 as the hangers. Curt Short-Arm Weight Distribution System with Sway Control...
view full answer... - Curt Weight Distribution System Trunnion Bar Removal For StorageThe trunnion bars of the Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW # C17422 are easily removed when they are not under tension. You will simply release the clips at the top of the hitch head and then remove the top of the trunnion bar before lifting the bottom out of the head. For the visual check out the Curt Replacement Weight Distribution Head for Trunnion Style Bars # C17307 and attached videos. Even though it doesn't show the...
view full answer... - Short Trunnion Bar For A Weight Distribution SystemThe shortest bar I was able to find, is the Replacement Trunnion Bar Kit for Curt Weight Distribution System # C17337, which measures 28-3/8" long. These spring bars are a replacement for the Curt Short-Arm Weight Distribution System with Sway Control # C17422.
view full answer... - Curt Short-Arm Weight Distribution System ComparisonThe spring bars of the Curt Short-Arm Weight Distribution Systems # C17422 and # C17333 both measure 28-3/8 inches. The difference between these two weight distribution systems is that # C17422 is equipped with sway control and also comes with a hitch ball. With the # C17333 system there is no sway control device and you will need to purchase a hitch ball separately # A-90. I have attached a Help Article titled "Common Weight Distribution and Sway Control Questions" for you as well.
view full answer... - Differences Between Curt Weight Distribution C17063 and C17422The biggest differences between the Curt Weight Distribution systems part # C17422 and # C17063 is the tongue weight ratings and the bar design. The # C17422 is a trunnion bar system rated for tongue weights up to 1,500 lbs and the part # C17063 is a round bar setup rated for tongue weights up to 1,400 lbs. Trunnion bars preferred typically as they usually provide better ground clearance and higher capacities. The best way to pick out a weight distribution system is to base it off of...
view full answer... - Can You Reverse with the Curt Short-Arm 15K Weight Distribution System with Sway ControlYou can reverse with the Curt Short-Arm Weight Distribution System part # C17422 but you need to be sure you are not backing up at an angle. The system works using friction to stop the trailer from swaying so trying to reverse at an angle puts too much stress on this system and can cause damage. If you need to reverse at an angle simply unhook the spring bars and sway bar from the trailer. This will be the case for most weight distribution systems.
view full answer... - Can You Back Up With Curt Weight Distribution C17422 if Friction Sway Bar isYes, so long as you remove the friction sway control bar, you can back up with the Curt weight distribution system you asked about: - Curt Short-Arm Weight Distribution System with Sway Control # C17422 The rest of the system including the bars can still be engaged, and you can pretty easily remove the friction bar via the two spring clips at either end. The # C17422 short-arm system is the perfect option for V-nose trailers in particular due to its shorter arms, and is rated for total...
view full answer... - Should Weight Distribution Spring Bars be Engaged Before or After Loading the TrailerOn a weight distribution system you will engage the spring bars after the trailer is loaded. It is not likely that you would damage the weight distribution system as you unload the trailer. The tension on the spring bars could change though which is why it is best to disengage them prior to unloading.
view full answer... - Should Chains on Curt Short-Arm Weight Distribution System Hang Straight Down to Spring BarsThe trailer frame mounted brackets for the Curt Short-Arm Weight Distribution System # C17422 should be positioned on the trailer so that the chain hangs directly down to the spring bar. The picture you mentioned is simply the studio photo we took after assembling the system so it's not adjusted exactly how it should be when actually putting it on a trailer for use. The brackets itself will not prevent proper orientation of the chain. I have attached the complete written installation...
view full answer... - Recommended Weight Distribution System for 10,000 lbs V Nose Car Hauler I have a solution for you but the Curt item # C69JR only has a 1,000 lbs tongue weight capacity. If your car hauler is loaded anywhere near its maximum capacity especially with that short tongue you will be way over 1,000 lbs. Instead I recommend the Curt TruTrack Weight Distribution System w/ Sway Control item # C17501. This system has a 1,000 lbs - 1,500 lbs tongue weight. You will need to measure the length of your Cynergy Car Hauler's tongue to confirm the 35" long trunnion bars...
view full answer...
Do you have a question about this Weight Distribution Hitch?
Info for this part was:
Updated by:
Lindsey S
Updated by:
Adele M
Updated by:
Kathleen M
Updated by:
Chelsea B
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Laura H
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
7/1/2023
I am very sorry that the weight distribution system arrived this way. I will have our Customer Service team reach out to you.