Curt Trunnion Style Weight Distribution System w/ Shank - 1K TW, 10K GTW
(39 reviews)
Price: $415.57
Curt Trunnion Style Weight Distribution System w/ Shank - 1K TW, 10K GTW
Item # C24UR
Retail:$585.95
Our Price: $415.57
You Save: $170.38
Need help with installation?
Locate installers near me- All Info
- Reviews (39)
- Q & A (0)
- Photos
CURT Weight Distribution Hitch - C24UR
- 900 lbs
- Fits 2 Inch Hitch
- WD Only
- CURT
- No Sway
This weight distribution system includes a shank with a 7" drop (or a 10-1/2" rise). Designed to help evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Hitch ball sold separately.
Features:
- Evenly distributes weight over axles of tow vehicle and trailer for stability and control
- Creates a more level ride for both tow vehicle and trailer
- Trunnion spring bars are constructed of solid, forged steel for strength and durability
- Adjustable spring bar tension - just switch links in lift chains to fine-tune
- Desired tilt is easily achieved using preset positions on system head - no more piling on washer after washer
- 5 Preset adjustment points to choose from
- Powder coated steel resists corrosion
- Snap-up lever eases installation by reducing lifting required by trailer jack
- System includes head assembly, adjustable shank, spring bars, lift brackets and chains, snap-up handle, pin and clip, and all necessary hardware
- Hitch ball sold separately - requires 1-1/4" diameter shank
Specs:
- Tongue weight: 800 lbs - 1,000 lbs
- Maximum gross towing weight: 10,000 lbs
- Application: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
- Shank length:
- Overall: 11"
- End of shank to center of adjustment holes: 10"
- Center of hitch pin hole to center of adjustment holes: 7"
- Maximum drop: 7"
- Maximum rise: 10-1/2"
- 1-Year warranty
| Included w/ 17352 | Required - Sold Separately | Optional Add-Ons |
|---|---|---|
|
|
|
Create a stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.
Selecting a Weight Distribution System
The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.
To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.
17352 Curt Weight Distribution Hitch - Trunnion Bar
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Curt Trunnion Style Weight Distribution System w/ Shank - 1K TW, 10K GTW - C24UR
Average Customer Rating: 4.8 out of 5 stars (39 Customer Reviews)
This weight distribution system includes a shank with a 7" drop (or a 10-1/2" rise). Designed to help evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Hitch ball sold separately.by: Ben 02/10/2024
Put this on a 1997 GMC C1500 with original springs, pulling a heavy 18 ft tandem flatbed. It takes all the squat out of the rig when hauling a heavy or slightly nose heavy load. Fairly easy to put on first time and anytime, just had to extend my safety chains.
by: Keith 08/23/2022
This stabilizer hitch solved my problems towing a 31ft travel trailer. It is a well built product and etrailer provided excellent service when I purchased it.
by: Hector06/18/2021
Product worked perfectly, I paid extra for fast shipping and the arrival was just in time before my family camping trip.thanks Again!
by: Gary 12/08/2021
by: Austin 04/06/2021
by: Paul 08/29/2022
by: Daniel 05/28/2021
by: Jose 09/18/2021
by: David 05/29/2021
by: Joel 07/30/2021
by: Dk11/04/2021
by: Matthew R.06/09/2017
I've been using WD hitches for almost 20 years. The Curt WD hitch is solid, sturdy, and simple to set up. I prefer the trunnion style and use a sway brake, also. This setup has never failed, regardless of the abuse it's subjected to.
by: Dave T03/20/2017
Fast shipping, great hitch, easy to install, remember to be patient when adjusting the first time. I shoulda measured for trunnion bar length before ordering. I needed the 28" not the standard 30". I've ordered from etrailer twice, and am very happy with their service. Will definitely order more in the future.
by: John06/07/2016
I have had my equalizing hitch for about a year now, and I have been very satisfied with this product.
My hitch arrived as scheduled and in good condition. it was fairly easy to install (though I admittedly had help from my father-in-law!), and it is simple to hook up to my camper and truck.
Prior to owning this hitch, my camper/truck would sag where they connected, and would cause extra stress on my brakes, causing the discs to overheat. My rig now sits much more evenly, and I have noticed a big difference in the amount of heat that is generated by my brakes.
I am very happy with this purchase!
by: Jacquelyn07/25/2022
It’s beautiful!!! Much nicer than expected and even better in person. Not only is it nice but super functional with safety in mind. My favorite part is that the ramp is so close to the ground so there isnt a huge step up into the trailer like most.
by: Ben 02/13/2012
This is a great product! My truck almost rides smoother with my trailer hooked up then without the trailer. Installation was a piece of cake. 20 minutes after installing I saw first hand what can happen when you don't have a weight distribution hitch. As I was driving down the road pulling my travel trailer I noticed up ahead of me that there was a truck was pulling a heavy trailer coming towards me down a hill. The trailer began to sway and the truck could not handle it. The truck crossed into my lane and then back across the road going into a ditch and rolling over! Thankfully the people in the truck were okay, but the guy said he had is trailer loaded down too much and he didn't have a weight distribution hitch! As I was standing there calling 911 I looked over at my truck, and the whole setup from my trucks front bumper to the rear bumper of my 31 foot travel trailer was perfectly level. Safety first everyone! This is a great product!!
by: Les P.11/19/2017
The product was received in good order and went together with the instructions. the product was put on a 2009 Yukon Denali and a 2017 24' Sportsman Travel Trailer. There are some questions about the tightening instructions of some bolts which I will call about.
by: Aaron08/23/2021
Relatively basic installation with correct LARGE torq wrenches for the ball . It doesn’t take long in a nice flat parking lot. I hooked this up to tow a travel trailer on a cross country move 3500miles or so with a good share of dirt roads, Made the ride smoother and safer
by: John C.04/13/2012
Received the weight distribution hitch promptly when they said. Hooked up to the motor-home well & carried our truck & RZR smoothly! We are very happy with the overall service we received. Very professional, attentive to details, good follow-up, and excellent product! Would order something from E-trailer again, because the service was so good! Thank you!
by: John01/07/2019
Great price, seems more robust than other brands. Works great, no problems. I use it to tow new travel trailers from Indiana to all over the US. Helps with "porpoising" on some trailers.
by: John08/10/2021
Works great, just need to get it setup right and your good to go. Worked great to equalize the weight so I could pull this trail safely down the road
by: Joe10/09/2010
Excellent SystemI have been very happy with this weight distribution system. It has performed perfectly and is built heavy duty for hauling. It is much stronger and built better than most of the systems that I looked at. A+
by: LynneB08/12/2016
I don't have anything to compare it to - bought this before we even towed for the first time, but it seems to be doing what it's supposed to do! No problems with installation or usage to report. Very pleased.
by: Ed Warren03/18/2015
Gotta love "Curt" products! ......great engineering, priced fair (etrailer.com).......
by: Charles11/23/2018
Ok system, had to buy a longer shank for my set-up. Work fine but that's about it. After about 4k miles trying different adjustments decided to replace with a different system.
FYI, I am near the top of the TW with this.
25
39
Show More Reviews
See what our Experts say about this CURT Weight Distribution Hitch
- Recommended Weight Distribution Hitch For Trailer With 8.5 Tall Trailer FrameYou will need a weight distribution hitch like the Curt Trunnion Style Weight Distribution System w/ Shank - 1K TW, 10K GTW # C24UR which uses clamps to will fit any height frame rail as long as it is not more than 2-3/4" wide. This hitch works with total tongue weights between 800-1000lbs, so as long as that matches your setup this would be a perfect option. For a shank that works with the 2-1/2" receiver in your new 2021 Ford F-250 I recommend the Curt Weight Distribution Shank for...
view full answer... - How To Properly Tension The Curt Trunnion Style WDH Spring BarsWhen counting the spring bar chain links for the Curt Trunnion Style Weight Distribution System w/ Shank # C24UR you would start at the first full link off of the half link bolted to the bars and count up 5 links. If you have less than 5 links below from the frame hook to the spring bar the frame bracket will likely rub on the spring bars.
view full answer... - Can Curt Trunnion Weight Distribution System be Used with 2018 Toyota Tundra SR5Yes the Curt weight distribution system part # C24UR that you referenced is compatible with the hitch of your 2018 Toyota Tundra SR5.
view full answer... - Weight Distribution System For Towing Small Camper With 2007 Toyota SiennaYou absolutely can use the shank of the Curt # C24UR weight distribution system in the rise position. When the shank is flipped to the rise position, you'll get a maximum rise of 10-1/2 inches. This system is designed for trailers with tongue weights up to 1000 lbs, so it might be too highly rated for the camper you're pulling. I'll link to a help article that explains how to find the fully loaded and ready to tow tongue weight of your camper, which is the figure you'll want to know in...
view full answer... - Recommended Weight Distribution/Sway Control for 8700 lb Travel Trailer Pulled With Lifted TruckSince you have a pretty long camper, it'll be pretty susceptible to trailer sway caused by cross winds and oncoming or passing traffic. A large camper with tall sides acts like a big sail on a boat which is why using a weight distribution system with a good integrated sway control component is highly recommended. If the 8750 lb figure represents the fully loaded and ready to tow weight of your trailer including the weight of anything carried in the truck bed behind the rear axle, then...
view full answer... - Can I Use the TorkLift Cannon with a Weight Distribution HitchThe weight distribution hitch you'll want to use will depend on the GVWR and tongue weight of your cargo trailer; you ideally have a WDH that the tongue weight of your trailer falls right in the middle of the range. Assuming that you tow the maximum that the Torklift Cannon # TLE1642 will allow (660-lbs TW/6600-lbs GVWR), something like the Curt Trunnion Style Weight Distribution System w/ Shank - 1K TW, 10K GTW # C24UR would be a good choice. This system will fit in the Cannon when you...
view full answer... - Weight Distribution Hitch for 21ft travel trailerYes, I highly recommend a weight distribution hitch for your new trailer. With the information you have provided I recommend purchasing the Curt Trunnion Style Weight Distribution System item # C24UR. Your trailer fully loaded will give you a tongue weight between 700lbs and 800lbs. This weight distribution system will give you a max tongue weight of 1k lbs and a maximum gross towing weight of 10K lbs. This hitch system will evenly distribute the weight over the axles of your F-150 and...
view full answer... - Does the Shank Come With the Curt Trunnion Style Weight Distribution SystemThe Curt Trunnion Style Weight Distribution System part # C24UR does come with the pictured shank. The only thing it does not come with that you will need is a hitch ball, part # 19286 for 2-5/16".
view full answer... - Sway Control Options For Curt Trunnion Style Weight Distribution System # C24URThe Curt Friction Sway Control # 17200 is compatible with the Curt Trunnion Style Weight Distribution System # C24UR. This will help to reduce trailer sway while driving on the highways. Another option to consider is the Tuson Asymmetric Sway Control # 335TSC-1000. This is an electric sway system and unlike the friction sway control you will not have to remove anything when maneuvering the trailer or driving on tight and twisty back roads. If the friction bar is not removed it could bend...
view full answer... - What Does Curt WD Hitch C24UR WeighThe Curt Trunnion Weight distribution system part # C24UR that you referenced weighs 94 lbs total. You should note that this weight does not count against the tongue weight capacity of the vehicle since this weigh essentially becomes part of the trailer hitch.
view full answer... - Can You Back Up With The Curt Trunnion Bar Weight Distribution Hitch C24UR?If the Curt Trunion Style Weight Distribution Hitch # C24UR is used without friction sway bars it does allow backing up and sharp turns, however it is recommended to use at least one friction sway bar # 17200 which makes it where you can NOT back up with the hitch hooked up. Instead of this hitch I recommend the Fastway e2 # FA92-00-1000 which has built in two point sway control that does allow backing up and sharp turns. This hitch is a favortie of our staff and installers, and works...
view full answer... - Can the Curt Trunnion Style Weight Distribution System Be Used With Both 2" and 2-5/16" Hitch BallsThe Curt Trunnion Style Weight Distribution System part # C24UR can be used with both a 2" hitch ball part # A-90 and 2-5/16" hitch ball part # 19286. The hitch balls don't come with the system so you'll need one or both of the above.
view full answer... - How to Get More Drop With Curt Trunnion Style Weight Distribution C24URYou can get more drop but will need a new shank for the Curt Trunnion Style Weight Distribution System # C24UR. The same exact system does not come with a different shank, which is why you'll need to get the shank separately. For 8 inches of drop, the 2 inch shank you'll need is the Equalizer Weight-Distribution Shank - 2" Hitch - 12" Drop x 15" Rise - 600 to 1,400 lbs TW # EQ44FR. This will give you the drop you need, and the only other thing required will be the hitch ball, the 2-5/16"...
view full answer... - Can Vehicle be Reversed with Curt Weight Trunnion Distribution Like all weight distribution systems the Curt Trunnion System # C24UR will allow you to reverse the trailer as long as you basically are backing up mostly straight. Basically you can turn in reverse just as tight as you could turn going forward without issue.
view full answer... - 10,000 lb Weight Distribution Hitch to Replace One Without Spring BarsThere aren't any replacement spring bars for your current weight distribution hitch, so if you need longer bars, the best thing to do is get a new 10,000 lb system. For that you can go with an option that has sway control, or if you don't need sway control, you can go with a standard weight distribution hitch. The best option for a 10,000 lb system is from Curt: - No Sway Control: Curt Trunnion Style Weight Distribution System # C24UR - With Sway Control: Curt TruTrack Weight Distribution...
view full answer... - Weight Distribution System Recommended For 31 Foot 6100 lb Kodiak Travel TrailerIn order to choose the correct weight distribution system for your trailer, it's helpful to know the tongue weight of the fully loaded and ready to travel trailer. A tongue weight scale like # e99044 could be used to determine this, although there are other methods as outlined in the article I've linked for you. Assuming that the 6100 lb figure you provided is the fully loaded trailer weight, the tongue weight would typically be around 900 lbs at most. Due to fact that this is a travel...
view full answer...
Do you have a question about this Weight Distribution Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Written by:
Lindsey S
Updated by:
Kathleen M
Updated by:
Wilson B
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.