Can Curt Trunnion Weight Distribution System be Used with 2018 Toyota Tundra SR5

Question

Question:

I would like to confirm that the C24UR Curt Trunnion Style Weight Distribution System w/ Shank - 1K TW, 10K GTW will work with a 2018 Toyota Tundra SR5, Double Cab, 5.7L Thank you.

asked by: Will C

1

Helpful Expert Reply:

Yes the Curt weight distribution system part # C24UR that you referenced is compatible with the hitch of your 2018 Toyota Tundra SR5.

expert reply by: Jameson C

1

Answer 1

Like all weight distribution systems the Curt Trunnion System #C24UR will allow you to reverse the trailer as long as you basically are backing up mostly straight. Basically you can turn in reverse just as tight as you could turn going forward…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Ron, congratulations on the new trailer! I have a Jay Feather myself and love it. You're definitely off to a great start with a weight distribution hitch, it will make a world of difference towing that trailer with your F-150. The Weigh Safe…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey there Layla! There are a few different forms of weight distribution hitches, but the majority of the systems that have sway control use friction bars, which work similar to brake pads on your vehicle. This works really well, but it can sometimes…

view full answer...

Answer 6

Hey Vernon, great to hear from you again! For your trailer that has a GVWR of 11,295 lbs I actually recommend stepping up one level and going with the 18.5K #WS49MR which has the same 6" drop and fits a 2-1/2" hitch receiver like the 12.5K…

view full answer...

Answer 7

Hi Doug! If you were just needing a weight distribution system for the sway control, I would have said the Andersen Weight Distribution Hitch w Sway Control - 6" Drop/Rise - 14K GTW, 1.4K TW #AN53VR could be a good option. However, I have tried…

view full answer...

Answer 8

Hello again Frank; tongue weight is typically 10-15% of your trailer weight. At 5,400 lbs you could go over the max 800 lb tongue weight of the #FA94-00-0800 but that probably isn't the case here. If you really want to be sure you could always…

view full answer...

Answer 9

Hello Brandon, Congrats on the new camper! When picking out the right weight distribution hitch it is most important to be as close to the tongue weight as possible. You said that your tongue weight is around 700 pounds, I am not sure if you are…

view full answer...

Answer 10

Hello Nate, thanks for reaching out. We do carry the 1,500 lb Blue Ox WD hitches like part #BLU54TR, but I am sorry to say we do not offer the WD hitch without the shank. The #BLU54TR comes with a shank for a 2-1/2" hitch. You can swap it out…

view full answer...

Answer 11

Hey there Michelle! While weight distribution systems are supposed to get the truck and trailer as level as possible, they are not complete miracle workers and won't make both 100% level in all situations. In fact, Andersen has a section of the…

view full answer...

Answer 12

The Weigh Safe True Tow Weight Distribution Hitch item #WS94RR weighs 113 lbs. Surprisingly enough you do not have to account for the weight of a weight distribution system when you calculate your tongue weight. What kind of trailer do you have?

view full answer...

Can Curt Trunnion Weight Distribution System be Used with 2018 Toyota Tundra SR5

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching