bing tracking image
Customer Service My Orders
  1. Accessories and Parts
  2. CURT
  3. Weight Distribution Hitch
  4. Shanks
  5. Fits 2 Inch Hitch
  6. Round - 6 Inch Drop
  7. Trunnion - 5 Inch Drop
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW
Add to Cart
CURT

Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW

Part Number: 17120
134 Reviews | 111 Questions
In Stock
$113.37
Retail:$149.95
You Save: $36.58
 Accessories and Parts
Add to cart
CURT Accessories and Parts - 17120
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

3d view icon
CURT Accessories and Parts - 17120
Accessories and Parts 17120 - 1400 lbs TW - CURT
CURT Accessories and Parts - 17120
17120 - Round - 6 Inch Drop,Trunnion - 5 Inch Drop CURT Weight Distribution Hitch
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW Fits 2 Inch Hitch 17120
17120 - Round - 6 Inch Drop,Trunnion - 5 Inch Drop CURT Weight Distribution Hitch
CURT Fits 2 Inch Hitch Accessories and Parts - 17120
CURT 1400 lbs TW Accessories and Parts - 17120

Show All (9) Product Images

Show Fewer Product Images

In Use/Installed

17120 - Round - 6 Inch Drop,Trunnion - 5 Inch Drop CURT Accessories and Parts
Accessories and Parts 17120 - Round - 10 Inch Rise,Trunnion - 9 Inch Rise - CURT
17120 - Fits 2 Inch Hitch CURT Weight Distribution Hitch
CURT Weight Distribution Hitch - 17120

Show All (4) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW customer photo
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW customer photo
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW customer photo
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW customer photo
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW customer photo
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW customer photo
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW customer photo
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW customer photo
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW customer photo
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW customer photo
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW customer photo

Show All (11) Customer Images

Show Fewer Customer Images

Videos

Show All (1) Videos

Show Fewer Videos

Need help with installation?
Locate installers near me
10-3/4" Tall shank offers a 6-1/8" drop or 10" rise when used with round-bar models, a 5-3/4" drop or 9-1/4" rise when used with trunion-bar models. Fits 2" trailer hitch receivers. Designed for rise and drop positions. 1-800-940-8924 to order CURT accessories and parts part number 17120 or order online at etrailer.com. Free expert support on all CURT products. Great prices and Fastest Shipping for Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (134)
  • Q & A (0)
  • Related Parts
  • Photos

CURT Accessories and Parts - 17120

  • Weight Distribution Hitch
  • Shanks
  • Fits 2 Inch Hitch
  • CURT
  • Round - 6 Inch Drop
  • Trunnion - 5 Inch Drop
  • Round - 10 Inch Rise
  • Trunnion - 9 Inch Rise
  • 1400 lbs TW

10-3/4" Tall shank offers a 6-1/8" drop or 10" rise when used with round-bar models, a 5-3/4" drop or 9-1/4" rise when used with trunion-bar models. Fits 2" trailer hitch receivers. Designed for rise and drop positions.


Features:

  • Shank slides into your hitch receiver and provides the attachment point for your weight distribution system's head assembly
    • Designed for use with Curt weight distribution systems
  • 8 Adjustment points for attaching the head assembly
    • Lets you level your trailer with your tow vehicle
  • Drop or rise positions available to fit your application
  • Black powder coated steel resists rust and corrosion


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Weight capacity: 15,000 lbs
  • Tongue weight: 1,500 lbs
  • Overall shank height: 10-3/4"
    • Holes are spaced 1-1/4" apart on center
  • Overall shank length: 14"
  • Maximum drop:
    • Round bar system: 6-1/8"
    • Trunion bar system: 5-3/4"
  • Maximum rise:
    • Round bar system: 10"
    • Trunion bar system: 9-1/4"
  • Distance from center of shank pin hole to back of adjustment shank: 9"
  • Distance from center of adjustment holes to center of shank pin hole: 10"
  • Distance from front of shank to center of shank pin hole: 11"


Dimensions


17120 Curt Weight Distribution Shank - 15,000 lbs







Customers Who Purchased This Accessories and Parts Also Bought...



Customer Satisfaction Score:

Ratings & Reviews

4.8

134 reviews
5 Stars
(109)
4 Stars
(21)
3 Stars
(2)
2 Stars
(1)
1 Star
(1)
Review Sort Icon
by:
Product arrived two days earlier than expected, very fast shipping. Already had a curt weight distribution hitch, but new trailer sat higher so I needed a higher hitch. This was exactly what I needed for my upcoming trip. We are now 1100 miles into our trip and this has made a world of difference in how the trailer is handling
Customer Large Image
Customer Image
Click to Enlarge
by:
I have a different manufacturer trunnion style equalizer and I was able to make this work with a few spacers because the down tube on the old hitch was 2 1/2" square, not 2". Our new Tahoe has a much higher mounted receiver than our old, and this leveled out our 30' travel trailer perfectly. Hitch was shipped and delivered promptly.
Customer Large Image
Customer Image
Click to Enlarge
James profile picture

James

7/9/2018

One item to note is that this does extend out a little further than the average shank. Safety chains could be a tight fit if they are a little shorter. May need a chain extension.

by:
Hooray this shank is the perfect drop for my travel trailer WD hitch, sometimes it's difficult to get the correct drop for a different truck height.
by:
Exactly what I needed. Added air bags, and trailer was riding tongue-high. Swapped our eaz-lift wdh over to this and everything rides level now.
by:
This hitch adapted perfectly to my current Husky Center Line weight distribution hitch. Our new Suburban has a higher mounted hitch receiver compared to our old vehicle. This helped level out our 29' travel trailer perfectly after a few adjustments. Hitch was shipped and delivered earlier than expected.
Customer Large Image
Customer Image
Click to Enlarge
by:
This weight distributing hitch shank was just the item I needed to drop my hitch ball head, and level my travel trailer, after buying a new tow vehicle. Great selection, informative web site, good price, and fast delivery. Thanks etrailer !
Customer Large Image
Customer Image
Click to Enlarge
by:
It does what it was designed to do.

When I bought an Explorer, I could no longer tow my cargo trailer level. Now, once again, I can.

This shank is heavy. It appears to be a solid bar, instead of hollow tubing, like all other hitch components I've owned. It's not a problem, but the weight was a surprise.
Customer Large Image
Customer Image
Click to Enlarge
by:
Nice quality item, would have been 5 star except the one of the welds could have been cleaned up better. Had to drop hitch due to going from a 1500 to a 2500 HD. Good fit.
Customer Large Image
Customer Image
Click to Enlarge
by:
Received a day early. Great help from tech to purchase proper adjustable shank. Will continue to deal with ETRAILER.
Customer Large Image
Customer Image
Click to Enlarge
by:
I needed a 5 3/4 inch drop with my new suburban, This worked perfectly. Site was easy to manage and delivery was prompt!
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
by:
HEAVY DUTY
by:
This shank was just what I needed to attach my Dodge Durango to my Jayco X17Z travel trailer. This item is well made and durable. Thanks E a Trailer.
Customer Large Image
Customer Image
Click to Enlarge
by:
Doing what I needed.
by:
This Shank worked great. It pulled our camper last summer over 5,000 miles on one trip and 250 miles on another. Have had no problems installing the equalizer hitch head from the old shank. Our new car sits high than the old one and we needed to lower the equalizer head 1.25 inches to have the camper sit level for towing.
Derk R. profile picture

Derk R.

6/25/2019

We still have the Shank but we have a new camper. It rides at a different height and we had to go to a different Shank. We will keep it in case it is needed for something else. We have many trailers here that many need it.

by:
Rock solid shank! This fits my slightly lifted 2008 Ram 1500 perfectly. It is being used on a Reese trunnion bar weight distribution hitch system and I couldn't be more pleased. Also, I had purchased a different shank that was too long and Michelle from etrailer took excellent care of me and got me the right product. I love etrailer!
Michael P. profile picture

Michael P.

8/10/2018

Bought an even taller 2016 RAM 2500 and ped the shank a notch. BAM! Still works great! This is a top quality shank.

by:
The Curt Weight Distribution system solved most of the trailer sway for us. Unfortunately, we needed to purchase a second shank to get the trailer level even after specking our purchase for a 3500HD Chevrolet Silverado. Seems like we should have gotten this shank with our kit.
Patrick B. profile picture
Etrailer Expert

Patrick B.

10/2/2014

Proper shank height is determined by hitch height on the tow vehicle and coupler height on the trailer. Hitch height is not the same on every single Silverado 3500HD of a given year. The only way to know what shank will be adequate is to measure the hitch height of your specific truck on level ground. Then do the same for the trailer coupler.

George A. profile picture

George A.

10/1/2015

The new shank help us level the trailer out and it seems better now.

by:
HEAVY, strong shank! I just wished I had measured from my hitch to the ground to get an idea of what I needed, first. On my'07 Silverado (GMT-900) with air bags in the rear and stock leafs, the bottom of this thing hovers just 4" off the ground! Less with a load on the flatbed trailer. Drove down a grass hill in my yard and have a nice trench there now. I'm going to have to cut as much off of this as possible. SOLID steel piece, too, so that should be fun.
Smithsonite profile picture

Smithsonite

11/30/2023

Ended up buying a 93 Ram W250 Cummins for a tow rig, and now this thing is too short! Had to buy a longer shank.

by:
Part is just what I needed. Upgraded my tow vehicle and the new hitch is 2 inches higher. My WDH did not have room to go lower and this solved the problem. Thank you E-Trailer.
Thomas profile picture

Thomas

5/18/2019

Been using the hitch for the past year. No problems to report.

by:
The item works for my truck. I haven’t been on the road t pulling the camper with it yet but will in the next couple weeks.
by:
We bought this to help level our towing set up and it works perfectly. We have a local trailer shop who transferred the WDH to this extension for free and it's awesome. The very sturdy construction and shear weight of this leaves no doubt in my mind that it is going to last us at least as long as our truck lasts. Then, if our new vehicle needs the tow ball at a different height, we've got it covered. The shipping was quick and it all worked as advertised. Thanks, etrailer! PS. Do NOT kick this with your big toe while it sits on your garage floor. It WILL hurt.
by:
This is a solid steel link and it worked out well allowing for better trailer tung /ball alignment. The 45 degree reinforcing plate does extend the hitch out a couple of inches or so farther then normal but in using a weight distribution hitch I haven’t noticed any issues other than making it easier to step through.
The only improvement might be a longer extension of the square stock beyond the pin hole to reduce side to side movement
by:
A perfect fit! Will do the job. Outstanding service from Angela, thank you
Customer Large Image
Customer Image
Click to Enlarge
by:
I wish Curt Manuf. had supplied this shank in their weight distribution hitch package. The new shank didn't match the specifications exactly but did allow me more than enough drop. The shank supplied in the weight control hitch package provides considerable rise but no drop. E-trailer customer service was great. They contacted me about a temporary out of stock item, offered alternatives and I still received all my items very quickly. It is the fastest free shipping I have ever seen.
by:
Works great with the Curt Hitch Head I bought. Assembling both together was easy and took very little time. I couldn’t believe how much better the trailer hookup was with a weight distribution system. Makes me feel better with the truck front end not sticking up when going down the road.
by:
High quality and perfect for the new height of the trailer after I flipped the axles to get better ground clearance.
Fred profile picture

Fred

12/14/2017

Perfect!

25
134
true
Show More Reviews

See what our Experts say about this CURT Accessories and Parts

Do you have a question about this Accessories and Part?
  • Choosing Between A Fastway Weight Distribution System With Round Bars Or Trunnion Bars
    One of the major differences between a round bar system and a Trunnion bar system is if ground clearance is an issue, you may be better off choosing a Trunnion-bar system simply because these bars slide into the weight distribution head instead of inserting into it from the bottom, thus maintaining a more streamline system.The round-style spring bars slide up into the head and are held in place with clips. The round bar on # FA94-00-0600 extends about 2-1/2 inches below the weight distribution...
    view full answer...
    Image 1 for
  • Recommended Longer Weight Distribution Shank To Allow Door Clearance On 2016 Ford Transit
    I recommend the Curt weight Distribution Shank, part # C17122. This shank measures 18 inches overall and 14-inches from the center of the hitch pin hole to the attachment holes for the head. This shank has a 15,000-lb weight capacity and this shank has an overall height of 10-inches. I have attached a photo of this shank with the dimensions shown you can check out. Another shank you may want to check out is the Curt # 17120. This shank has a 15,000-lb weight capacity and measures 10-inches...
    view full answer...
    Image 1 for
  • Replacement Shank With More Drop for Fastway e2 Weight Distribution
    Welcome back Larry! What you are looking for is the Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW # 17120. This has the needed drop you are looking for, has plenty of tongue and towing weight capacity, and will work perfectly with your Fastway e2 system (Fastway bolt spacing on the head and shank is 1-1/4" on center and so is this Curt shank). There are other options out there, like the Fastway # FA92-02-4214, but this Curt one is a better price at the...
    view full answer...
  • Can You Use A Curt Shank With A Fastway Weight Distribution System?
    Hi Jim! Fastway weight distribution shanks follow an industry standard 1-1/4" vertical hole spacing that Curt also follows (as do most, though not all, weight distribution manufacturers). So if, for example, you have a Fastway e2 Weight Distribution System # FA92-00-0800 that has a max drop of 2-3/4" and need more than that, you could swap the shank out for something like the 10" long Curt Weight Distribution Shank # 17120 that offers 5-3/4" of drop. This would bolt up without issues at...
    view full answer...
  • Availability of Drop Shank for Curt Weight Distribution for 6 inches of Drop
    Hey Bb, we do have the Curt weight distribution shank part # 17120 which can do a drop of up to 6-1/8 inches which would be perfect for either the Fastway kit you mentioned or the Curt system part # C95MJ you referenced. Which system do you have?
    view full answer...
  • Recommended Extended Ball Mount or Hitch Extender for Towing Boat Trailer
    For your 2018 Tahoe and boat trailer needing a longer extension between them I recommend the Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs # BM20. Having a longer ball mount like this will not reduce the capacity of your hitch at all. This will give you a length of 13-1/4 inches from the center of the ball to the hitch pin hole. For a compatible hitch ball the shank needs to be 1 inch diameter for this mount. I recommend the 2 inch ball # 40038 or...
    view full answer...
  • Solution for Needing Replacement Reese Weight Distribution Shank
    Hey Mike, so what you are looking for is a weight distribution shank which we have with the part # 17120 for an option that will allow you to have up to a 5-3/4 inch drop. Thankfully basically all of the weight distribution companies decided to make their shanks to the same specs so they are interchangeable.
    view full answer...
  • Compatible Shank Options for a Reese Pro Series Weight Distribution System
    Hi John, great question. Yes, we do have weight distribution shanks with more drop that will work with your Reese Pro Series weight distribution system. If you only need another 2 or 3 inches of drop, I would start with the Curt Weight Distribution Shank, part # 17120. The Curt # 17120 measures 10-3/4 inches tall and 14 inches long. It is compatible with your system and can provide up to 6 1/8 inches of drop with a round bar weight distribution setup. If you find that you need significantly...
    view full answer...
  • Replacement Shank For A Reese Titan 66006 Weight Distribution System
    Hi Mark! We can definitely get you a shank for your Reese Titan 66006 weight distribution system! You didn't mention if you have a 2" or 2-1/2" hitch, so I figured it would be a good idea to have an option for both. You can find these below: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Long - 10" Rise/6" Drop # EQ90-02-4900 Curt Weight Distribution Shank - 2" Hitch - 10" Long - 9-1/4" Rise/5-3/4" Drop # 17120 Both of these are pretty similar to each other, but there are a few differences...
    view full answer...
  • Will Curt Weight Distribution Shank Work with Fastway E2 Weight Distribution System FA92-02-4100
    Yes, the Curt weight distribution shank part # 17120 is a fit with the Fastway E2 WD system part # FA92-02-4100 that you referenced. Thankfully nearly all of the weight distribution system manufacturers made their head and shank dimensions similar.
    view full answer...
  • Best Weight Distribution Hitch for 9,000 lb Travel Trailer
    We have exactly what you need for a weight distribution hitch for your Jayco Jay Flight, which according to my research has a GVWR of 9,000 lbs. Based on that, because the ideal system would be one in which your loaded tongue weight falls somewhere in the middle of the weight distribution system's tongue weight capacity, the best option is from Curt: - Curt TruTrack Weight Distribution System with Sway Control # C17501 This system is rated for loaded tongue weights between 1,000 lbs and...
    view full answer...
  • Solution for Needing Curt TruTrack C17499 with More Drop from Shank
    The Curt TruTrack part # C17499 that you referenced is not available without a shank so you'd need to also go with the shank part # 17120 which would provide the drop you'd need. We also don't carry a similar rated system without a shank but we do have the Reese Steadi Flex part # RP66559 which has a tongue weight range of 500 to 1,000 lbs and comes with a shank that can do 4 inches of drop.
    view full answer...
  • Will the Gen-Y Phantom Hitch Ball Mount Work w/a Weight Distribution System?
    Hey Dan. I checked with Gen-Y and their Phantom Hitch Ball Mount item # GY37WR can not be used with a weight distribution system. The Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers item # 325-GH-1024 does have the ability to be used with a weight distribution system. However, neither of this ball mounts are going to reduce your tongue weight because you'll still have to use the shank on your Reese system. If you're needing some additional drop because your Tacoma's hitch sits higher...
    view full answer...
  • Correct Curt TruTrack Weight Distribution System for 8,000 Lb Trailer
    The correct Curt TruTrack Weight Distribution System will be based on tongue weight, not necessarily gross trailer weight. That said, the average tongue weight will be around 10-15% of the trailer weight so we can estimate the tongue weight to be between 800 - 1,200 lbs. The part # C17500 which is rated for 1,000 lbs will put you right in the middle so this is what I recommend.
    view full answer...
  • Correct Curt Weight Distribution System for Towing a 2018 Keystone Bullet Premier Ultra Light 30RIPR
    It looks like your current system is a Curt MV like part # C17052 which is supposed to help with the distribution of weight but doesn't include any sway control. This is why you were having issues with the wind. There are friction sway control bars like part # 17200 that you can add to your system but they are not as effective as a system that has the sway control integrated into it. The Curt TruTrack Weight Distribution (WD) # C17500 does have integrated sway control so it will help to...
    view full answer...
    Image 1 for Image 2 for
  • Need 6" Drop Shank For Fastway E2 Weight Distribution Hitch
    Hello James, thanks for reaching out. We do have a solution for this. I am not sure exactly what Fastway E2 you got, but I am assuming it came with the same shank that comes standard with the Fastway hitches we offer which is the 6-1/2" Rise, 4" Drop shank with 6 holes like part # FA92-02-4100. If this is what you have, going to the 6" drop shank would resolve your problem. For that, you can use the following: - Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500...
    view full answer...
  • Which Curt Weight Distribution Shank for Towing with 2014 Chevy Silverado 1500
    Hey Michael, with just the information you provided I can't give you an exact answer but I would be willing to bet you'd need a shank with a bit more drop like the Curt # 17120. If you could get me the height from the top of your trailer hitch opening to the ground and the height of your trailer coupler's bottom lip to the ground when the trailer is level I could tell you exactly what drop you'd need.
    view full answer...
  • Recommended Weight Distribution System To Tow An ATC Game Changer 2513 Travel Trailer
    This is a pretty common issue with aluminum frames so we definitely have a options available for you. With that being said, the 8 inch frame height will make things a bit more difficult, but not impossible. First, the Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion # C17501 will handle tongue weights from 1,000 pounds up to 1,500 pounds. This will need the Frame Brackets for Curt TruTrack Weight Distribution System w/ Sway Control - 8" Frames # C17515 and depending...
    view full answer...
  • Recommended Weight Distribution System for a 10,000 lbs Travel Trailer
    Yes, I would recommend using a weight distribution hitch with sway control. I am a big fan of Equalizer for their reliability, ease of use, and affordability. It looks like your 2022 E2W Alta 2810KIK TT tops out at 9,597 lbs when fully loaded. Weight distribution systems are recommended based off of tongue weight which is typically between 10% - 15% of your trailer's total weight. Which would put yours between 960 lbs - 1,440 lbs. I recommend the Equal-i-zer Weight Distribution w/ 4-Point...
    view full answer...
  • Is 9 inches of Ground Clearance Enough for Weight Distribution Shank
    9 inches of ground clearance will be adequate for most situations. If you need the drop that the part # 17120 provides to tow your trailer level that would be the priority over ground clearance. This shank does not drop down too far so there wouldn't be a different option we could provide that is going to give you any additional clearance.
    view full answer...
  • Are Curt, Fastway, and Husky Weight Distribution Shanks the Same
    Husky, Curt, and Fastway weight distribution shanks are all interchangeable since they are all the exact same where the head attaches to them.
    view full answer...
  • Recommended Weight Distribution System for Forest River Salem FSX 178BHSK
    If you are going to use a weight distribution system then it makes sense to go with one that has integrated sway control as well since this is such a useful added benefit. The best cost effective option we have for this is the Husky Center Line Weight Distribution. The part # HT32217 has a tongue weight range of 600 lbs - 800 lbs so as long as the loaded tongue weight of the trailer plus weight of cargo in bed does not exceed this you'll be good to go. I will add that the tongue weight...
    view full answer...
  • Choosing the Correct Rise or Drop for Weight Distributing Shank
    Choosing a weight distributing shank is just like determining the needed rise or drop of a ball mount. Determine the height of the top of your receiver, and the height of the trailer tongue when it is level. The difference between these measurements is the rise or drop needed. If the height of the trailer coupler is taller than the receiver height, you will use the rise measurement mentioned in the product description of the shank. If the receiver height is lower than the coupler height,...
    view full answer...
  • What Size Holes Are Used on the Curt Weight Distribution Shank
    The Curt Weight Distribution Shank part # 17120 uses the industry standard 3/4" diameter holes which are spaced 1-1/4" center to center. The bolts which are used to secure the head to the shank are also 3/4" diameter. If you need these as well you can obtain them with the Replacement Bolt Kit for Curt Weight Distribution Systems part # C17076 which has two 3/4"-10 x 4-1/2" hex bolts.
    view full answer...


< Previous
123. . .5
Next >



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Carrie F
Updated by:
Carrie F
Employee Cole B
Installed by:
Cole B
Employee Andy C
Installed by:
Andy C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Product Experts Available Now!
Call 1-800-940-8924