Need 6" Drop Shank For Fastway E2 Weight Distribution Hitch

Updated 08/15/2025 | Published 07/27/2025

Products Featured in This Question

BulletProof Hitches 2-Ball Mount for 2" Hitch - 4" Drop, 4" Rise - 10,000 lbs

(654)

$129.00

Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW

(132)

$104.44

Question:

I have a Fastway E2 Trailer distribution hitch for my trailer. Bought a new car and now the E2s standard ball mount is about 2 inches too high for this distribution system despite me maxxing out on the range of lowering of that mount on the ball provided by Fastway. What ball mount hitch would best accomplish a 2 inch further than the one Fastway originally supplied?

asked by: James R

Expert Reply:

Hello James, thanks for reaching out. We do have a solution for this. I am not sure exactly what Fastway E2 you got, but I am assuming it came with the same shank that comes standard with the Fastway hitches we offer which is the 6-1/2" Rise, 4" Drop shank with 6 holes like part # FA92-02-4100. If this is what you have, going to the 6" drop shank would resolve your problem. For that, you can use the following:

- Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW # 17120

expert reply by: Jesse M

17120
(click to enlarge)

Jesse M.

8/15/2025

Hey James, did the Curt Weight Distribution Shank work out for your new car setup? I'm curious to know because it could help others in a similar situation.