Shank offers up to a 7" rise and a 3" drop for your Equal-i-zer weight distribution system. Measures 18" long and fits 2" x 2" trailer hitches.

Shank offers up to an 13" rise and a 9" drop for your Equal-i-zer weight distribution system. Measures 12" long and fits 2-1/2" x 2-1/2" trailer hitches.

This replacement spring bar is designed for use with Fastway's e2 weight-distribution systems with a maximum tongue weight of 1,000 lbs.

Adjusts the height of your system along the 9 adjustment bolt holes on this weigh distribution shank. Fits 2" receivers. Works in both the rise and drop positions.

Shank offers up to an 8" rise and a 4" drop for your Equal-i-zer weight distribution system. Measures 12" long and fits 2-1/2" x 2-1/2" trailer hitches.

Shank offers up to a 7" rise and a 3" drop for your Equal-i-zer weight distribution system. Measures 12" long and fits 2-1/2" x 2-1/2" trailer hitches.

This shock-absorbing shank gives you 6 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

Shank offers up to a 12" drop and a 15" rise for your Equal-i-zer weight distribution system. Measures 12" long and fits 2-1/2" x 2-1/2" trailer hitches.

Use your Equal-i-zer weight-distribution system with your straight-tongue trailer. This adapter attaches to your trailer's tongue and provides properly spaced mounting points for the sway-control brackets of your system.

Stop trailer sway before it begins with this dual-cam sway control. Cams lock in place on either side of trailer to supply consistent pressure, helping to prevent and correct sway. Works with weight-distribution systems with cam-style spring bars.

Shank offers up to a 10" rise and a 7-1/4" drop with a round bar model or 10-1/4" rise and 5-1/2" drop with trunnion models for your Fastway e2 weight distribution system. 12" Long and fits 2" x 2" trailer hitches.

This kit includes everything you need to replace your SwayPro's spring bars. Use these bars to change your system to one with a tongue weight rating of 750 lbs to 1,000 lbs.

This kit includes everything you need to replace your SwayPro's spring bars. Use these bars to change your system to one with a tongue weight rating of 1,000 lbs to 1,500 lbs.

Shank offers up to a 15" rise and a 12" drop for your Equal-i-zer weight distribution system. Measures 12" long and fits 2" x 2" trailer hitches.

Shank measures 9" long from the center of the hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox SwayPro weight distribution system. Fits 2" receivers.

Replacement head assembly works with Blue Ox SwayPro weight distribution system with rotating lift brackets. Fits SwayPro systems that use the pinless auto-latch to secure the spring bars in the head.

Shank offers up to a 7" rise and a 3" drop for your Equal-i-zer weight distribution system. Measures 12" long and fits 2" x 2" trailer hitches.

Replacement sway-control bracket includes L-bracket, L-pin with clip, inner and outer link plates, and necessary hardware. Bracket attaches to trailer tongue and provides mounting point for Equal-i-zer spring bar.

Due to the close tolerances, this thin-walled socket can make it easier to install your hitch ball on an Equal-i-zer weight distribution head.

Adjustable head assembly works with Reese trunnion-bar weight-distribution systems. Mounting hardware included.

Shank measures 9" long from the center of the hitch pin hole to the center of the adjustment holes. 9 Bolt holes let you adjust the height of your Blue Ox SwayPro weight distribution system. Fits 2" receivers.

Designed for use with Reese weight-distribution systems, this kit includes 2 snap-up brackets and a handle for easy lifting and lowering.

Adjustable head assembly works with 6,000-lb, 8,000-lb, 10,000-lb, or 12,000-lb Fastway e2 weight-distribution systems that use trunnion spring bars.

This pair of replacement spring bars is designed for use with Fastway's e2 weight-distribution systems with a maximum tongue weight of 1,000 lbs. Includes 2 bars with the trunnions, bolts, lock washers, and Nylock nuts installed.