Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs

See what our Experts say about this Dutton-Lainson Trailer Winch

• Overall Dimensions of Dutton Lainson Winch # DL14730
  The overall base width of the Dutton Lainson Winch # DL14730 that you referenced is 4-3/4 inches. The height from the bottom of the base to the top of the drum is 6-53/64 inches. And the length front to back is 6-1/4 inches, or 8-27/32 inches including the drum.
  view full answer...
• Recommended Hand-Brake Winch for 1/4 inch 45-50 foot Cable
  The Dutton-Lainson Hand Winch, part # DL14730, is what you are looking for. It has a Maximum Drum Capacity of 9/32 inches x 58 feet and includes a hand brake so it will work perfect for your application. If you end up needing replacement cable, I recommend using part # DL24045. It is 7/32 inches x 50 feet which makes it comparable to what you are using.
  view full answer...
• Winch Recommendation for Winching 600 lb Jon Boat and Trailer Up Incline
  The higher the rating for the winch the easier it will be to winch your boat and trailer up the incline. The Dutton-Lainson Hand Winch, TUFFPLATE Finish, Two Speed with Direct Drive # DL14730 that you referenced has a 2,000 lb capacity so it should work very well to winch in your 165 lb jon boat and trailer that weighs total around 600 lbs. This two speed jack will has ratios of 12.4:1 and 5.4:1. For a strap you would then want the part # DL24249. This is 25 feet long. I also attached...
  view full answer...
• Does the Dutton-Lainson Hand Winch item # DL14730 Include a Strap?
  No, it does not. The Dutton-Lainson Hand Winch item # DL14730 is just the winch itself. You can add a strap using the Hand Winch Strap with Safety Hook item # DL24249. This 2" wide x 25' long strap has a maximum load strength or break strength of 4,000 lbs. It has a safe working load limit or WLL of 2,600 lbs.
  view full answer...
• What are the Base Dimensions of the Dutton-Lainson Hand Trailer Winch Model DL2000AB
  The overall width of the Dutton Lainson Winch, # DL14730, is 4-3/4 inches. The height from the bottom of the base to the top of the drum is 6-53/64 inches. And the length front to back is 6-1/4 inches, 8-27/32 inches including the drum.
  view full answer...
• Replacement Hand Winch Cable for a 2,000 lbs Capacity Shelby Brake Winch
  As of October 2016 Shelby is owned by winch maker Dutton Lainson. If you are just needing to replace the 2,000 lbs capacity cable on your Shelby winch, I recommend the Hand Winch Cable with Safety Hook item # DL24104. This cable is 1/4" in diameter and 50' long and has a 3,500 lbs. If you're looking for a 2,000 lbs capacity winch you will also need the Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs item # DL14730. This winch has a hand brake for manually...
  view full answer...
• Is the Fulton Two-Speed Brake Winch Kit Part F1619-01 Still Available
  I do have a brake hand winch for you but the Fulton Two-Speed Brake Winch Kit part F1619-01 was discontinued in July 2017 and is no longer available. If you would like to replace the winch then I recommend the Dutton-Lainson Hand Winch part # DL15504 for 1,800 lbs, part # DL14730 for 2,000 lbs, or part # DL14830 for 2,500 lbs. This winch has a two speed design, integrated hand brake, and zinc plated finish. It should work as a direct replacement for the winch you are using now. I have...
  view full answer...
• Availability of 2-Speed Winch Compatible with 50 of Cable
  Yes, if you are needing 50' for cable I recommend going with the Dutton-Lainson Hand Winch # DL14881 which is rated for up to 3,500 lbs and is compatible with up to 37' for 3/8" cable or 106' for 7/32" cable. If you can get by with a 2,000 lb winch then the Dutton-Lainson Hand Winch # DL14730 is another option as it can take up to 58' of 9/32" cable.
  view full answer...
• Is the Dutton-Lainson Worm Gear Hand Winch, # DL10970 Salt Water Resistant for Marine Applications
  The Dutton-Lainson Worm Gear Hand Winch, # DL10970, is made of laminated steel gears and a steel base, which is powder coated for some protection, but it is susceptible to the elements and corrosion. Instead, a better option would be the Dutton-Lainson Hand Winch, # DL14730. This winch has a Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to...
  view full answer...
• Recommendation for a Worm Gear, Brake or Trailer Winch for a Mushroom Harvesting Trolley
  There are a few things to determine before we can make a recommendation that will work well for your Mushroom Harvesting Trolley. First, how do you want to control the load that you are using the winch for? A trailer winch controls the load as it is being pulled in, but free spools out. A hand brake winch, like the one you referenced, controls the load coming in and when in free spool the load can be controlled by manipulating the hand brake. A brake winch, or worm gear winch controls...
  view full answer...
• Recommended Hand Winch For Loading And Unloading Go-Kart In Pickup Truck
  I recommend a 2-speed winch with a hand brake for loading and unloading your go-kart. The winch I recommend is the Dutton-Lainson, part # DL14730. This winch has a capacity of 2,000-lbs and can use either cable or a strap. The gear ratio can be changed so you have better control of your go-kart. If you want to use a strap I recommend part # DL24249. for cable I recommend part # DL24045. You will want to make sure you have a secure location to mount the winch.
  view full answer...
• Which Winch Should I Use to Pull a Small Sailboat out of the Water and Across Sandy Beach
  As much as I'd love to recommend using something cool like an electric ATV winch similar to the Bulldog Utility Winch # BDW15008 , I think you'd be well served going with the Dutton-Lainson Hand Winch # DL10974 . This is a worm gear hand winch that has a 2000-lb capacity. One of the things I love about this winch is that the loop drive lets you crank the winch with a power drill if you've got a cordless drill or an electrical outlet down by where you're storing it. To mount this winch,...
  view full answer...
  
• Dutton-Lainson Hand Winch Compatibility With Drill Drive Socket Adapter
  The Dutton-Lainson # DL6456 Drill Drive Socket Adapter is only compatible with DLB series brake winches, so it wouldn't work with the # DL14730 winch you'd mentioned. Dutton-Lainson offers a 2500 lb capacity winch as part # DL15761 which is closest in capacity to the 2K winch you were looking at, which is compatible with the socket adapter. The nice thing about a brake winch is it automatically applies the brake when you stop cranking the handle but with the flip of a lever, you can play...
  view full answer...
• Will The Dutton-Lainson Winch Work For Loading a 600 LB Motorcycle on Trailer with Drill
  The winch you referenced is the Dutton-Lainson Winch, part # DL14730. It has a capacity of 2000 lbs, so it will certainly handle the 600 lbs you mentioned the motorcycle weighs. This winch features a reversible ratchet, hand brake, and has a quick attach handle. I would also recommend the Hand Winch Strap with Safety Hook, part # DL24249. This strap is 2 inches wide and 25 feet long, and has the safety hook attached. The strap has a capacity of 2600 lbs. This combination does not have...
  view full answer...
• Pro Series KR10000301 Standard Series Brake Winch - 1000 lb. Load Capacity
  The handle and gears of your existing jack aren't replaceable, but we do offer jacks that would provide the performance you're wanting. At 11 inches in length, the handle of the # F143100 hand winch is the longest one Fulton offers, so between the extra leverage you'll gain with that as well as the 500 lbs of additional capacity over your existing jack,the # PSKR10000301 Pro Series winch, the Fulton winch would work much better for you. Can I offer you a USA made alternative? I'd recommend...
  view full answer...

Do you have a question about this Trailer Winch?