Throw this cover over your RV's dual, 30-lb propane tanks to protect them from freezing on a cold winter night or increasing in pressure on a warm summer day. Use the built-in zipper to easily access the tanks' shutoff valves and regulator.
Features:
Specs:
Concerned about the pressure inside your dual propane tanks drastically increasing on a hot day? Or perhaps you're worried that the propane will freeze on a cold winter day? This heavy-duty, durable cover is UV resistant and cold-crack treated so you can protect your propane tanks during almost any weather condition. The cover will also protect your tanks from road debris, dirt, rust, and grime, so you won't have to spend too much time wiping them clean. And this sleek cover has a textured pattern that'll match the diamond plate design on your RV or trailer.
The included, reinforced board insert should first be assembled. This will help keep the rigid shape of the top part of the cover. Then, making sure the zipper is oriented outwards, slip the cover down along your tanks until you can wrap the reinforced elastic hem around the bottom of them. This hem keeps the cover snug and secure on your propane tanks so it doesn't shift around or come off in the wind.
And if you still need to access the tank's shutoff gas valves or the propane regulator, you can use the built-in, molded zipper to easily access your tanks without having to completely remove the cover.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
AJ: What's up everybody It's AJ with etrailer.com. Today we're going to be looking at this propane cover from ADCO. Now this is made for dual 30 pound propane tanks. So it's going to help cover that up, just protect it from the sun, people from messing with it and, really just to keep it looking nice with your rig. Sometimes some people don't want to see the propane tanks. They'd rather them just be covered up, out of sight, out of mind kind of thing.
Let's check it out. Now, if you're looking at this color and thinking it's not really your style, it does come in two other colors. You got the diamond plating, which is actually a silver reflective surface. And then you have the camo one. Now the diamond plating one is going to be made out of the heavy-duty vinyl just like this white one, but the camo one is actually made of a thermoplastic.
They're all going to hold up just fine for you.Another great thing about the cover is if you need to get in there and access your propane tanks, you have the zipper up here up front. You can quickly unzip it and get in there and adjust the valves or whatever you need to. And actually on this one, the gauge and stuff is on the other side, so we can just flip the cover around. That way we have access back here just the same, but it was easier to show you guys the zipper up front. Another upside to the cover is that if you need access to it, you don't have to take the cover fully off.
You just got the zipper up front, you can unzip it, get in there and access the valves or whatever you need to get to. So you don't have to always take off the cover when you need to access the propane tanks. I think that's a really positive thing about this cover. It's not hard to put the cover on and off, but that's just one less thing you got to do.Now you've probably seen a couple of different covers for your propane tanks up front. There are ones that are a harder plastic or polypropylene and they cover it the same way, except they can access it through the top so you can unscrew the top and reach down in there.
And that's a heavy dutier cover. It's probably going to protect better against rocks and stuff that get kicked up towards your propane tanks. But I think this soft cover does the job just fine. I think there's maybe more room in here to even access the tanks from the front. The other one seems like it had a smaller cover up top, which I guess you can still get in there. but I like having to be able to do that. You could even flip off the top section here to get to what you need to.I don't know if you all can tell or not, but it's actually pretty windy out here today. And that's why I'm pointing at the bottom that actually cinches around the bottom of the tank. So if you're worried about the wind picking up the vinyl cover and moving around or anything, you can see the wind is not really affecting it at all. It's not going to move it up and off this tank. It's actually a pretty snug fit for these dual tanks. So I'm kind of impressed with that part.The one thing I'm a little iffy on is the insert up here. It's actually got a kind of very thin board that comes with it, attaches in the middle. I'll show you it here. I guess it's two pieces of particle board connected to the middle and you put that on top so it keeps its shape. I think it's also maybe so if it rains, it doesn't pool here in the middle, because if it wasn't there, it didn't have any support, the rain could just sit on the cover. That's going to cause problems over time. So I think that's probably there to keep the rain off so it can just run off. It's not in the way or anything. It's not hard to install. It'd be nice if it was actually sewed into the top of the cover that way if you did take it off, you didn't have to worry about keeping that board separate or keeping track of that and making sure that it didn't go anywhere.So whether you have it just to cover up your propane tank, because you don't want to see them, or you actually want them protected from the sun and protect your valves and your hoses in there, keep them all nice and protect them from all the elements and the sun damage, this is going to do both those great. I think it's a good addition to your propane tank. It does make it look way nicer with them covered up, I think anyway, and I completely believe it's going to stay on there as you're traveling. You're not going to have any issues with it blowing off or just coming loose on you. So it checks all the boxes I wanted it to. I think that does it. Thanks for hanging out. I hope this helps.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
very happy with this purchase. Nice qu ality
Fits great definitely would buy again. Like most soft covers ive had the particle board like material isn’t the most durable.
The cover barely covers a plain 20 lb tank from Walmart. It does NOT cover the tank on a travel trailer. The tank on the travel trailer sits inside a metal fastener. It adds maybe an inch to what is needed from a cover. Totally worthless.
Product matched the description. Seems well constructed. As with other covers I've purchased, some difficulty fitting the cover over or around the bolt used to attach the tank to the trailer. Velcro held well. Received order in a timely fashion.
It fits my propane tank, but just barely. It's tall enough, but I can just barely close it around the tank
It fits very snugly, Will learn more when it's time to swap a tank. Nice to just unzip to view the tank gauge. Heavy feeling material which I think will hold up well.
Propane cover works great
Not good at all. It shredded the first time I went on a trip with my travel trailer.
Exactly what I needed and ordered. Ordering was quick, easy, and accurate.
Works as advertised. I am happy with the product.
I love the cover!
The only problem I had was, I thought the board, underneath the top of cover was one piece. I had to duct tape it to make it one piece across the top. It would be helpful if it had TWO zippers instead of one only going one way. I struggled with during winter because I wanted to cover one tank only, but the zipper only went one way, so it broke. The concept is great, just a few adjustments suggested.
Fits my dual 20lb tank set up well.
This replaced one that had been on for three years sitting outside the whole time.
You always provide great service.
A good quality tank cover that should last several seasons. I was surprised by how heavy the vinyl is. i had some concerns about the zipper after reading reviews but it is fairly heavy and should last. (I wish it was a double zipper though.) My last $20 tank cover from A***** lasted less than one season; this cover is worth the extra money.
Durable. Good replacement for OEM. But room for improvement. On back side where LP hoses go in, would be nice to have velcro or some other hole/port options. Current zipper placement facilitates connecting to only 1 LP tank given my camper's configuration. The 'plate' that goes between the top of the LP tanks and vinyl cover is flimsy. Would prefer a 1/4" or 3/8" thick durable PVC type of material because, invariably, the cover gets stepped to reach higher parts of camper.
Great product. looks great on my RV. Great quality.
So far so good! Works as would be expe cted.
I adapted the cover for tank and battery cover. Work great, thank you.
Great product
Very fast delivery
Order was shipped and arrived as stated
Do you have a question about this RV Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.