bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. LED Light
  5. Red
  6. 6-1/2L x 2-5/16W Inch
Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Oval - Red Lens

Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Oval - Red Lens

Item # STL22RB
Retail:$32.04
Our Price: $22.40
You Save: 30%
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.31 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Forest River trailer lights experts, and offer a great price. etrailer.com carries a complete line of Optronics products for your Forest River Wolf Pup Travel Trailer 2017. Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Oval - Red Lens part STL22RB from Optronics can be ordered online at etrailer.com. Complete trailer lights installation instructions and technical support.
  • All Info
  • Reviews (1722)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - STL22RB

  • Tail Lights
  • LED Light
  • Red
  • 6-1/2L x 2-5/16W Inch
  • Stop/Turn/Tail
  • Submersible Lights
  • Optronics

6-1/2" x 2-5/16" Oval. Waterproof trailer light serves 3 functions: stop, turn, and tail. Miro-Flex faceted reflector increases light output. Flush mount with grommet (sold separately). Accepts industry-standard 3-prong plug


Features:

  • Oval trailer light serves 3 functions on trailers less than 80" wide
    • Stop light
    • Tail light
    • Turn signal light
  • Sonically sealed, waterproof housing and lens unit is submersible
  • Miro-Flex faceted reflector design provides increased light output with a contemporary appearance
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable polycarbonate lens and housing
  • Red lens over white LEDs
  • Flush mounts with grommet (A70GB - sold separately)
    • Mounts in any 360-degree position
  • Accepts industry standard 3-prong plug (A45PB or A47PB - both sold separately)
  • DOT compliant


Specs:

  • Overall dimensions: 6-1/2" long x 2-5/16" tall x 2-1/4" thick
  • Diodes: 12
  • Power draw at 12.8V:
    • Stop/Turn: 0.161 amps
    • Tail: 0.009 amps
  • Lifetimes warranty on LEDs


Optronics STL22 Series Miro-Flex Oval Sealed Tail Light Diagram

Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.


Recessed-Mount Light

Recessed mount light

Recessed-mount trailer lights install underneath a grommet (A70GB - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.



STL22RB Optronics Miro Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 LEDs - Oval - Red Lens

Alternative part number: STL-22RB


California residents: click here


Customer Satisfaction Score:


Customer Reviews

Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Oval - Red Lens - STL22RB

Average Customer Rating:  4.8 out of 5 stars   (1722 Customer Reviews)

6-1/2" x 2-5/16" Oval. Waterproof trailer light serves 3 functions: stop, turn, and tail. Miro-Flex faceted reflector increases light output. Flush mount with grommet (sold separately). Accepts industry-standard 3-prong plug

by:

The size was right, and the brightness of the LED light, let's people know there is a trailer in front of them, especially when braking, or making a turn



by:

Definitely a major upgrade from the single bulbs that finally went out on my old trailer. Simple as can be when it comes to install them. I did have to run additional ground wires to get to get lights to work when the parking lights are on. Could have been due to the fact my trailer is a tilt trailer? No big deal just a heads up if anyone else is having the same problem. Pictures shows them with parking lights on and brake lights. They're bright that's for sure!



by:

Much brighter than my previous tail lights. Easy to install. Would definitely buy again!



by:

Love these LED trailer lights and now Love Etrailer!! Did a quick Google, found these guys, they had what I was looking for and at a great price. Their shipping was FAST, and I really liked the e-mails letting me know every little thing about my order and when it will arrive. Installed them the same day I got them. Installation was very easy and the lights were VERY bright. We had to bring the 3k pound trailer home today in 6" of snow. I felt great knowing the people behind me knew I was hitting the break, because you can see these break lights from a mile away!! Thanks Etrailer!!



by:

Excellent replacement products for the bullet bass boat trailer. Upgraded all trailer lights to LED.



by:

Awesome tail lights

Samuel

5/21/2017

Awesome tail lights !!!!



by:

Good design and materials. Bright light, and easy fit into accessory mounting parts. As a single middle third light, it functions as a brake, running and directional lights. Perfect for a hitch mounted bicycle rack.



by:

The lights were great. Instigation was very easy. The service and delivery time was excellent. I will adding more LED lights to my trailer and I will be buying them here! Thank you to your entire staff!



by:

Bright lights. Great upgrade from the incandescent. Very easy to remove old ones and install these on my triton snowmobile trailer.



by:

These were the exact trailer lights I needed as an upgrade for the old originals. I was able to find this because of an answer that etrailer.com provided to someone looking for information about a specific type of discontinued lights. I've used the trailer a number of times through the years and always found them to be helpful, professional, and reasonably priced



by:

Ordered led lights to replace all the lighting on my triaxle trailer. Parts arrived sooner than expected and were a terrific upgrade. I had an issue with one taillight. The item was replaced at no charge, no hassle, no questions asked. Fantastic customer service.



by:

they are nice and bright sorry no picture of them in action video would not load to site

Randall

7/30/2017

Ahhhh! Is all I hear from those behind me cause they are so bright and thats what you need on the back of your motorcycle. Very pleased!!!



by:

Sirs: I have a ten-foot enclosed motorcycle trailer that I purchased new in 2010. Recently, I noticed the existing taillights were working -- but were far from being safe. I assumed that I had a wiring problem and that I might have to take the trailer somewhere and have the wiring harness checked and/or replaced. Fortunately, I looked at several of the videos on your web site and decided that I would replace the existing taillights before committing to a re-wire job. I ordered a pair of STL22RB 12 diode trailer lights and a pair of a70gb gaskets. These items arrived in the mail yesterday, and I installed them this morning. Problem solved! The new LED lights work quite well, and the installation took less than five minutes. I have some light bulbs in the house that take longer to replace than did these taillights. Thanks, guys, the videos that I looked at on the etrailer.com web site convinced me that I could do the job simply, quickly, and safely. Piece of cake!!! Now, I may change out all the old marker lights with new LED lights. Thanks, again. Lou C.

Lou C.

5/12/2017

These LED lights are still working as well as the day day they were installed. Great product. Great video info provided by etrailer.com.



by:

Awesome looking upgrade for older trail er...



by:

These lights were an exact replacement for the original incandescent lights in my car trailer. They are very bright, and traffic behind me actually pays attention when I turn my signal on now. They are a much needed improvement over stock. Juanita was also very helpful in verifying that I had the right connector for them. Very prompt shipping too, as I had them in 3 days after I ordered them.

Don G.

10/21/2015

The lights work as good as new. They are a great replacement over stock tail lights.



by:

Although the products are excellent the packaging leaves a lot to be desired! The items I ordered were tossed into an oversized box with no padding at all left to rattle around during shipping. Luckily there was no damage.



by:

Pic of installation



by:

Will be two more weeks before ready to install them. They look like made good. Only reason not 5 star is not hooked up yet to test.

Teddy J.

3/13/2023

Zero problems with these. Im completely satisfied with them.



by:

Super bright! Easy to install. Amazing prices. Bright during the day and super bright at night!



by:

What do y'all want a follow up to? If i had a nickel for every item I've ordered off of ETrailer, I wouldn't have to work for a few months... I keep coming back because the prices are fair, shipping is free and fast, and ETrailer has everything I need.

I do wish you sold trailer kits though. Being a welder, I have built a few trailers in my free time and sold them for a small side business. Why isn't there an axle, fender, brakes, springs (shackles and all hardware) tires and wheels kit? It would be nice to not have to go and click and add to cart all the multitude of items I need to build a trailer individually. Just saying...



by:

Nice and bright. Should be seen much better in the daylight compaired to the stoce lights. And they fit further into the rubber mounting gaskets for better protection from damage.

Kenny

10/1/2017

Still working great after a year and really happy that I upgraded the lights on my trailer.



by:

This tail light fits my trailer exactly like I wanted. The website designer and marketing/technical team did a great job with the description, videos of the product. I will definitely purchase again.

Mixa

10/17/2017

Thanks for following up. I forgot all about the trailer light! It works great! Speaking of that, I need to order the side ones for the trailer. I dont know the parts yet.



by:

very nice brake/tail lights, worked great as replacements for my boat trailer. Economical, bright, highly recommended.

Kevin

7/22/2014

still working great a year later, works much better than the last LED set different supplier that I put in. Highly recommended!



by:

Replaced my old bulb taillights in Doolittle trailer with these. Very bright. Too new to evaluate on how long they last and that is only reason I gave them a 4 star review

Eric D.

9/18/2015

still working great



by:

Had to wait a couple of weeks for one piece on the order to come in, but etrailer let me know what was going on. Product looks good, will install in the next couple of days. 2nd time I've used etrailer, good stuff, good prices, good service.

Chris J.

11/21/2017

The product has performed great. One of the amber side lights has burned out, so Ill be ordering a replacement soon.


25
1661
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Dimensions of the Optronics Trailer Light # STL22RB and Grommet # A70GB
    The Miro-Flex Trailer Tail Light # STL22RB measures 6-1/2" long and 2-5/16" tall. It installs in the PVC Grommet # A70GB which has an inner length of 6-11/16" and a height of 2-5/8". I would cut the hole a little bit smaller than that because it would be much easier to make the mounting location larger than smaller. Attached is an installation video of the grommet for you to check out.
    view full answer...
    Image 1 for Image 2 for
  • Replacement Tail Light for Triton 88ATV Trailer
    The Miro-Flex LED Trailer Tail Light part # STL22RB is a recessed mount tail light that mounts in an oval hole about 6-1/2" long x 2-5/16" tall using the PVC Grommet part # A70GB. I took a look at your Triton 88ATV Trailer online and this appears to be exactly what you have now so it should work just fine but if you take a quick measurement of the opening you would be able to confirm this for yourself. The oval tail lights are fairly standard in regards to size.
    view full answer...
  • 12V Power Switch for Operating Racing Lights on Golf Cart
    A switch you use to operate your golf cart racing lights needs to be rated for the power draw of all the connected lights and for the voltage of your cart electrical system. Deep cycle golf cart batteries can be 6-volt, 8-volt or 12-volt. For example, Optronics ThinLine LED Racing Light Kit # LS-108 includes a 12V power switch to operate its LED lights. We also offer 12V power switches like Pollak Heavy-Duty Toggle # PK34212 which has two terminals; the supply hot wire runs to one terminal...
    view full answer...
  • New LED Lights Do Not Work on Trailer with Same Connector
    The photo did not come through but are you sure that the pins inside the old connector matches the socket inside the new light? They could look very well the same and even plug into one another but that doesn't mean they are wired the same. I would find the pin inside the light that is supposed to receive power and then check to see if it is in fact receiving power using a circuit tester. There could also be a ground mixup. For example, the new light may ground though the hardware and the...
    view full answer...
  • Will Optronics STL22RB Fit in Place of Wesbar Trailer Light 203561
    Optronics LED trailer light # STL22RB is not exactly the same design as the Wesbar 203561 but it will fit the same mount. Because the designs are a little different the STL22RB is not listed as a direct replacement. It also requires a pigtail harness # A45PB.
    view full answer...
  • Are Wiring Plug-Ins Needed for Optronics Trailer Tail Light # STL211RB
    Yes, wiring pigtails will be needed in order to install the Optronics Trailer Tail Light, # STL211RB. For straight pigtails you will need the 3-wire, # A45PB, and 2-wire, # A45CB. For right angle pigtails you will need the 3-wire, # A47PB, and 2-wire, # A49PB.
    view full answer...
  • Replacement Tail Light for Utility Trailer With Command Electronics 003-5400
    The Command 003-5400 light doesn't give me specific dimensions. Base on some research it appears the Optronics # STL72RB may be a replacement option. I've attached the measurements for this light to assist. The Optronics # STL22RB is a similar light with overall dimensions of 6-1/2" long x 2-5/16" tall x 2-1/4" thick. This light uses grommet # A70GB for flush mount as well so even though they are different they mount in the same way. If you can give me dimensions and a photo of the...
    view full answer...
    Image 1 for Image 2 for
  • Attaching Ground Wire When Installing LED Tail Light To Trailer
    In order for the Optronics Miro-Flex Sealed Light, part # STL22RB, to work on your trailer, you will need either part # A47PB, or part # A45PB pigtail. These attach to the back of the light and have 3 wires that you need to run. The white wire is the ground and can then be attached to a clean metal surface like the trailer frame. The red wire is attached to the turn or brake light wire, and the black wire is attached to the tail light wire. The rubber grommet for attaching this light...
    view full answer...
  • Replacement RV Trailer Light Gaskets and Mounting Grommets
    Numbers on trailer light lenses usually refer to DOT codes, not the light manufacturer's actual part number for the item. The light part number is usually on the light's base, which typically is less likely than the lens to be damaged or to pop off while you're going down the road. On the two linked pages you can see all of our light gaskets like # A42GB and light mounting grommets like # A45GNB.
    view full answer...
  • Bolt on Mounting Bracket Options for 6-1/2 Inch Oval Trailer lights
    The Optronics 6-1/2 inch Oval Trailer Lights, item # STL22RB, can be bolted on with the addition of a trailer light mounting bracket. These brackets are available in black powder coat, item # BK70BB, and stainless steel, item # 337LB1SS. Along with the mounting brackets you will need rubber grommets, item # A70GB to secure the lights in the oval openings. Finally you will need a pigtail connector to wire the Miro-Flex, Sealed, 6-1/2 inch Oval, LED Trailer Light, item # STL22RB. There...
    view full answer...
  • Method of Bulb Replacement on Oval Red Grommet-Mount Trailer Taillight
    Usually a grommet-mount incandescent tail light will be pressure-fitted into the grommet and held there simply by friction from the rubber. If there are no visible screws to allow lens removal and no accessible portion of the light's rear surface then its almost a sure thing that you'll just need to carefully pop the light out of its grommet. Ideally you'll have a tool that is strong enough to flex the grommet material but not so hard that it can damage the lens or base. The light in your...
    view full answer...
    Image 1 for
  • Determining Function of Trailer Light Assembly with White, Brown, and Green/Yellow Wires
    Based on standard trailer wiring colors the white wire will be the ground, the brown would be running light, and the green/yellow will be the stop/turn circuit.
    view full answer...
  • Best Location For Mounting Light Brackets On Curt Hitch Cargo Carrier
    Unfortunately, we do not have any photos of the # BK70BB installed on a cargo basket. It can be installed vertically or horizontally, depending on the item it is being mounted to. I do recommend mounting it so that the wires for a connector at the back of the light are safe and not in danger of being damaged. My recommendation is to mount it to the underside of the top rail on the carrier. This does give it some protection. I recommend the light kit, part # 98174LED. This kit includes...
    view full answer...
  • How To Install LED Trailer Tail Lights On a Side by Side
    The Miro-Flex LED Trailer Tail Light part # STL22RB as an example is designed for use on trailers therefore the stop and turn signals are combined which is the case for almost all of our trailer lights. Therefore, in order to use this tail light on a vehicle/trailer or in your case an ATV, you must have combined wiring which simply means the stop and turn signals are on the same circuit. If your wiring is separate then the only option to use a trailer tail light is with a converter, the...
    view full answer...
  • Parts Needed to Install a Pair of the Miro-Flex Trailer Tail Light # STL22RB
    The Miro-Flex Trailer Tail Light # STL22RB that you referenced is sold individually. If you needed a pair of these you would need to order a quantity of two. For a mounting grommet you would want the part # a70gb and for the pigtail harness part # A47PB.
    view full answer...
  • Any Other Parts Needed When Replacing Incandescent Trailer Lights With LED Lights
    You will want to measure your existing oval lights to make sure they will match up to the dimensions on the Optronics lights. The Optronics LED Trailer Stop/Turn/Tail Light, part # STL22RB, will work as a LED replacement for the Optronics Oval Trailer Stop/Turn/Tail Light, part # ST70RB. They would both fit in the Optronics Rubber Grommet for 6-1/2 Inch Oval Trailer Tail Lights, part # A70GB. They would use an industry standard 3-prong plug like the Optronics Straight 3-Wire Pigtail for...
    view full answer...
  • Replacement LED Marker Lights for Floe Pro 100 14 Foot Snowmobile Trailer
    From all the photos I saw online, it looks like Floe used grommet mounted 2-1/2 inch marker lights and standard 6-1/2 by 2-1/2 inch oblong taillights. If that's the case, for the amber 2-1/2 inch I would recommend # MCL59AB and # MCL59RB for the red marker light. The lamps use a standard # A55GB grommet to mount. The grommet is a fit for a 3 inch diameter rough opening. The lamps are designed to be used with a 2 pin pigtail like part # A49PB. I wasn't able to find a photo showing the...
    view full answer...
  • Are Optronics # STL72AB Oval LED Lights Usable as Stop-Turn-Tail Lights
    The Optronics Amber Oval LED Trailer Turn Signal and Parking Light, part # STL72AB, is intended for use as a trailer turn signal and parking light. DOT requires that brake lights always have a red lens. Optronics offers a similar-size 3-function Stop-Turn-Tail LED Light with a red lens, part # STL22RB. I have included a video on this particular item and also one addressing trailer wiring. For both of these light assemblies you will need the Rubber Grommet, part # A70GB, which provides...
    view full answer...
  • What Light Works with the Trailer Light Mounting Bracket Part # BK70BB
    Yes, for the Trailer Light Mounting Bracket part # BK70BB you can use part # ST70RB (incandescent) or part # STL22RB (LED) for the light, part # A70GB for the grommet, and part # A45PB for the wiring harness.
    view full answer...
  • Replacement 6-1/2 inch Oval Tail Lights, Incandescent and LED
    Yes, the Sealed, 6-1/2 inch Oval Trailer Stop, Turn and Tail Light, 3-Function, item # ST70RB, should be the correct replacement for your Truck-Lite 60 taillight. The replacement grommet for this light is the Rubber Grommet for 6-1/2 inch Oval Trailer Tail Lights, item # A70GB. If you would like to upgrade to LED lights then you could use the Miro-Flex, Sealed, 6-1/2 inch Oval, LED Trailer Stop/Turn/Tail Light, 3-Function, 12 Diode, item # STL22RB, with the grommet mentioned above.
    view full answer...
  • Replacement Red Oval LED Stop/Turn/Tail Lights for Skeeter Bassboat Trailer
    Just click on the linked page to see all of our LED-type red oval trailer stop/turn/tail lights like # STL22RB from Optronics. This particular light measures 6-1/2- x 2-5/16-inches and uses a mounting grommet # A70GB and bracket # BK70BB. LED lighting offers the advantages of brighter output, lower power consumption and of doing away with periodic bulb changes. The waterproof STL22RB offers these advantages plug the security of a sonically-welded waterproof enclosure, perfect for your...
    view full answer...
  • How to Remove Flush Mount Taillights and Grommets in a Square Tube Snowmobile Trailer Frame
    It sounds like your trailer has the 6-1/2 inch Oval stop turn and tail lamps and some side marker lamps that use a rubber grommet like the 6-1/2 inch oval tail lights grommet, # A70GB. Since the area where your lights are mounted is not accessible from the back side, you will need to pry the light out of the front of the grommet with a small screwdriver or other similar tool. If you could find a plastic pry tool that might work better and keep you from damaging the rubber grommet. Another...
    view full answer...
  • Wiring Installation Into the Custer Light Mounting Box # AL65-02
    For the Custer Light Mounting Box - (2) 6-1/2" Long Oval Holes - Diamond Plate Pattern - Aluminum # AL65-02, you will use the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # A70GB with lights like # STL22RB or # STL22AB. These lights use a pigtail like # A47PB or # A45PB. You will need to drill holes in the housing to mount and add a hole for the wiring as well. I recommend using a the Snap Bushing Grommet - 7/16" ID, 9/16" OD # SWC8055 or the Replacement Flush Mount Rubber Grommet...
    view full answer...
  • Determining Function of Wires on Car When Installing New Taillights
    What you'll want to do is get a circuit tester like part # PTW2993 and test all of the trailer wiring you mentioned on your Corvette with the different taillight functions applied so that you can identify them and run them to the correct color wire on your new taillights.
    view full answer...
    Image 1 for


< Previous
123. . .4



Do you have a question about this Trailer Light?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Tyler C
Written by:
Tyler C
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R
Employee Amy B
Updated by:
Amy B
Employee Brian T
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.