How To Install LED Trailer Tail Lights On a Side by Side

Updated 05/15/2020 | Published 05/13/2020

Question:

I have four wires on the Side-by-side for running light, brake light, Blinker, and ground. There are three wires on the new LED lights I have it hooked up so that I have blinkers and brake lights but no running lights I have tried to hook the brake lights with the blinkers but when doing that both blinkers blink at the same time what can I do to make this work . Thanks for your help.

asked by: Kevin

Helpful Expert Reply:

The Miro-Flex LED Trailer Tail Light part # STL22RB as an example is designed for use on trailers therefore the stop and turn signals are combined which is the case for almost all of our trailer lights. Therefore, in order to use this tail light on a vehicle/trailer or in your case an ATV, you must have combined wiring which simply means the stop and turn signals are on the same circuit. If your wiring is separate then the only option to use a trailer tail light is with a converter, the Hopkins Tail Light Converter part # HM48847.

expert reply by: Conner L