See what our Experts say about this Optronics Trailer Lights

• Correcting Hyperflashing After Installation LED Taillights on 2004 Dodge Ram 3500
  In order to stop your turn signals and brake lights from hyperflashing with your LED taillights, you will want to install LED Light Bulb Load-Resistors on the turn light and brake signal wires. Hyperflashing is a common issue when changing incandescent bulbs to LEDs. One of my fellow Experts put LEDs on his Dodge 2500 and ran into the same issue. He used the #DI34ZR Load-Resistors on his truck to solve the hyperflasing issue. I've attached an installation video of these load resistors...
  view full answer...
• Is the Optronics Trailer Tail Light # ST70RB the Correct Replacement for My 2006 Boatmate Trailer?
  Hello Jamey, Yes, the Optronics Trailer Tail Light - Stop, Turn, Tail - Submersible - Incandescent - Oval - Red Lens # ST70RB is the correct replacement for your R-SAE STIP2 A-SAE IP2P 97 DOT light on your 2006 Boatmate trailer. What is your favorite lake to go out on?
  view full answer...
• Recommendation for Side Mounted Trailer Taillight
  What do you mean by side mount? Like one that mounts side of trailer frame but still points back? Do you possibly have pictures of what you are looking for?
  view full answer...
• Wesbar 108121 Replacement Trailer Light
  Wesbar light 108121 is now a discontinued item but the Optronics # ST70RB is a direct replacement for it, and yes, this 6-1/2-inch oval 3-function light will work great and fit the same grommet.
  view full answer...
• Replacement Tail Light for 2003 Karavan Trailer With 205-00094 Light
  Hey John! It looks like that light they're using is the Truck Lite 60202R. You can replace it with the Optronics Trailer Tail Light # ST70RB. If you want a replacement grommet to go with it use the # A70GB. The way it is mounted you will have to pop it out by either getting behind it or prying it out with something like a screwdriver like you suggested. Where do you typically take your snowmobile?
  view full answer...
• Recommended Replacement For RoadPro RP6064RSMD Oval Tail Lights
  Hey Jerry, We don't offer that specific brand but I do have the Optronics Trailer Tail Light # ST70RB which has the same functions, dimensions, and requires the same 3-prong plug that you can use to replace your RoadPro RP6064RSMD tail lights.
  view full answer...
• Can Bulb be Changed in a Truck Lite 60 Series Trailer Light
  It looks like there are different versions of the 60 series tail lights from Truck Lite. If you have a sealed version meaning there is no way to open up the light then the bulb cannot be replaced. If you can access the inside of the light it looks like it takes a 2057 bulb available at an automotive supply store.
  view full answer...
• Availability of Rubber Grommet to Use with Install of Optronics Trailer Taillight # ST70RB
  Hey Bob, yes we do have a rubber grommet that you can use with the Optronics trailer light part # ST70RB with the part # a70gb.
  view full answer...
• How to Remove Lens From Utility Trailer Turn Signal to Check Bulb
  Hey Doug, thanks for reaching out! Most trailer turn signal lights will either had screws you have to remove, like the Optronics kit # TLL160RK, or a pop-off lens like the Optronics # ST70RB where you'll use a screwdriver to find a good spot to pry the lens off. Each light is different though so if you can't figure it out from either of those feel free to shoot me some photos of your light(s) and I can see if we have any info on it!
  view full answer...
• What is the Difference Between the Peterson 417-49 and the Optronics A45PMB 3-Wire Pigtails?
  Not really. They're just made by different companies. The 3-Wire Pigtail for Optronics Trailer Lights item # A45PMB and the Peterson item # 417-49 are both made out of 20 gauge wire. They each have the female weathertight plug and are 10" long. I would go with the most affordable option.
  view full answer...
• Replacement 6-1/2-Inch Oval Trailer Tail Lights
  Thank you for the trailer light lens coding. This is not an actual light part number; this usually appears on the light base. Just the same I think what you're looking for is a product like # STL78RB. This is a sealed 6-1/2-inch oval tail light that uses high efficiency LEDs instead of standard bulbs. You can see all oval tail lights by clicking on the linked page. Click on the filters for lens color, bulb type, etc to narrow down the range of lights shown.
  view full answer...
• Replacement Taillights for CM Trailers 2-Horse Bumper Pull Trailer
  Thank you for the DOT number from your horse trailer's brake light lens. This is not the light's actual part number; that is usually found on the light base. If you can find that reference you can search our site using that number or use the filters on the linked page to select a new light based on dimensions, shape, etc. I checked photos of CM Trailers' 2-horse bumper pull Dakota series trailers and they currently use LED type surface-mount oval lights like # STL78RB. This light's mounting...
  view full answer...
• Will the ST70RB and the STL72RB Both Fit on the Same Sized Light Housing?
  To answer your question, both of the # ST70RB and the # STL72RB are 6-1/2" long x 2-1/4" wide x 2-3/8" deep lights; the main difference is that one is an LED light while the other is an incandescent. I was able to find some information on your TruckLite 60283 light and the best match to replace that light is the # ST70RB , since your trailer light system is wired for incandescent lights. If you wanted to switch both lights over to LED, you would use # STL72RB but you would likely need...
  view full answer...
  
• Trailer Light Kit Recommendation for a Pace Enclosed Trailer
  For an LED trailer wiring kit that would work well on your Pace trailer I would recommend the part # TLL16RK. This part number comes with everything. The lights are rectangular though. To use the part # ST70RB you would need the grommets part # a70gb, the pigtail part # A45PB, brackets part # BK70BB, and # A35W42B.
  view full answer...
• LED Replacement for WESBAR 203561 Light
  Yes, the Optronics Trailer Light, # STL70RB, will replace the Wesbar 203561 to upgrade to LED lights. You will want to check the factory grommet when you remove the light, if the factory grommet is in good condition you can use it with the LED upgrade. If the factory grommet is worn or shows any signs of damage, now is the time to replace it. You would use the Optronics Rubber Grommet, # A70GB. Same thing on the 3-prong plug connector, check it also to make sure it is in good condition....
  view full answer...
• Replacement Tail Light for Wesbar 108121
  The Wesbar 108121 has been discontinued but the Optronics Trailer Tail Light - Stop, Turn, Tail - Submersible - Incandescent - Oval - Red Lens # ST70RB is the ideal replacement. It works with the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # A70GB. This light will use the standard 3 prong plug that if you need a replacement is # A45PB or # A47PB for the 90 degree connector.
  view full answer...
  
• Will Optronics Sealed Oval Trailer Stop Light Replace the Bargman Light on my 2002 Homesteader
  It will fit Bargman part # 40-06-001. Since your light is a Bargman unit, you will just need to find the part number on it somewhere. The DOT 97 number has to do with Department of Transportation regulations and you will see similar numbers stamped on most lights. If you find 40-06-001 on the light, then this Optronics light will work as a direct replacement. If you find a different part number, please write back and I will help you find exactly which light will fit.
  view full answer...
• Replacement Tail Light For Bargman 6-1/2 Inch Oval Light
  The Optronics light that you referenced, part # ST70RB, is an exact replacement for Bargman light # 40-06-001. If you can find that part number on your Bargman light, then we can be sure that this light is the correct replacement. Even if your Bargman light has a different part number, # ST70RB will very likely work. The dimensions of the light are 6-1/2 inches long x 2-1/4 inches wide x 2-3/8 inches deep. If your current trailer light is approximately the same size, this light will work...
  view full answer...
• What is the Approximate Amperage Draw of the ST70RB Sealed Oval Trailer Light
  The Sealed Oval Trailer Stop, Turn and Tail Light, item # ST70RB, uses an 1157 automotive style bulb with two filaments. The bright filament is rated at 21 watts and the dim filament is rated at 5 to 6 watts. With the filament wattage, we can determine the amp draw of the bulb. Amperage equals watt rating divided by input voltage. Assuming a 12.8 volts input in all cases, with both filaments lit, the amperage draw would be approximately 2.1 amps. With only the dim filament lit, the amp...
  view full answer...
• Bargman 40-06-001 LED Replacement Trailer Tail Lights
  Yes we do! The LED light that is comparable to the Bargman 40-06-001 and the Optronics # ST70RB that you referenced is the part # STL002RB with the staggered 3 pin connection. We also have the kit # TLL12RK which comes with the same size lights, grommets, and pigtails. The only differences are that they have a slightly different lens design and they use 12 diodes as opposed to 1. Installation videos have been linked for you to reference as well.
  view full answer...
• Trailer Replacement Light for a Model J-65 Tail Lamp
  I have a couple of options for replacement lights. The larger one is going to be an 1/8 of an inch off of your Model J-65 tail lamp. It is the Optronics Trailer Tail Light item # ST70RB you were looking at. This light is 6-1/2" x 2-1/4" and has a 3 prong plug. I have linked a diagram below that shows the dimensions of this light. We do have a slightly smaller light that is 6-1/2" wide by 2-5/16" tall it is the Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes...
  view full answer...
  
• Direct Replacement Oval Stop Turn and Tail Light for a Model J-60 Trialer Light is the # ST70RB
  Yes, the J-60 light is a 6-1/2 inch wide by 2-1/4 inch tall light that is 2-1/4 inches deep overall so the Sealed, 6-1/2 inch Oval Trailer Stop, Turn and Tail Light, 3-Function, item # ST70RB, is a direct replacement for your light. If you need a replacement grommet for the light you can use the Rubber Grommet for 6-1/2 inch Oval Trailer Tail Lights, item # A70GB, and if you need to wire the light or replace the connector you can use the right angle pigtail, item # A47PB, or the straight...
  view full answer...
• Load Resistor Recommendation for Use with LED Tail Lights on a Flat Bed Truck with Hyperflash
  You will wire a load resistor into the wiring of each light socket that has an LED bulb and flashes. So basically you will need to wire a load resistor into any bulb that blinks or has a dual intensity feature that lights up when the brakes, blinkers, or emergency flashers are operated. To do this correctly, you will need to wire the load resistor on the positive wire and then either ground it to the ground wire of the bulb, or to a good frame ground. You will need to do this for all of...
  view full answer...
  
• How Do I Replace The Bulb On My Rola Swinging Enclosed Cargo Carrier
  The lights in the Rola Swinging Enclosed Cargo Carrier for 2" Trailer Hitch, part # 59109, are sealed. You cannot replace the bulbs, but you can replace the lights. It would require prying the light fixture from the grommet, disconnecting the plug from that light fixture, and connect it to the new light fixture. Once that is done you can install the new grommet, if needed, and the new light fixture. You can go with a regular incandescent light fixture, such as the Optronics Trailer Tail...
  view full answer...

Do you have a question about this Trailer Light?