How Close to Trailer Weight Should Capacity of Trailer Leaf Spring Be
Updated 09/04/2019 | Published 09/03/2019 >
Question:
Trying to pick double eye leaf spring replacements for boat trailer. I think its more than replacing what I have exactly... 1st question I have: is spring rating based only on static load, not dynamic loading? If I think my boat + trailer is 2200 lbs what size springs needed? 2nd Q - my axle is 1 inch spindle, 74 hub face to hub face. I think it may be 2000 lb rated... it might be slightly overloaded as evidence by tire wear on inside edges. my boat trailer has double eye leaf springs. 4 leaf, 1 3/4 wide, all 4 together are 1.215 thick. unloaded, free open height is 3.25, loaded is 2.25 2.25 is a problem... I think springs are wore out or undersized boat got heavier? tires rub underside of fenders and gap looks too small stationary. 3rd Q how much over can total weight be relative to axle rating? is 200lb a big deal? 4th Q if axle is ok, should I get springs rated for 1250 lb each? Except I fear the free open height needs to be bigger than 3.25??? Lots of Qs thanks for advice
asked by: Bob L
Expert Reply:
Our trailer leaf springs are rated for dynamic axle load. Which means the capacity listed but in use on the highway under normal circumstances.
Since your trailer is 2,200 lbs loaded you want to go for a spring capacity 2,200 lbs or slightly higher.
For you second question it sounds like your springs are worn out. You do want to have 4-1/2 inches of fender clearance between the fender and your tire when the trailer is unloaded.
Ideally you are within a couple hundred lbs of the total trailer weight with the spring capacity you go with. 2,500 lb part # e66SR would be your best option based on that.
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 2500 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 25-1/8 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: trailer leaf springs
- Search Results: dexter trailer hubs and drums
- Search Results: dexter trailer bearings races seals caps
- Search Results: torsion axle
- Shop: Long U-Bolt Kit for Roadmaster Comfort Ride Suspension System - For 3" Diameter Axles
- Shop: Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle - Off-Road Tires - 5,200 lbs
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 7,000 lbs
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 6K
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 5 Bolt Flange - 5,200 lbs
- Search Results: slipper
- Search Results: trailer bearings races seals caps
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Q&A: Can 6,000 Lb 6 on 5-1/2 Hubs Be Swapped Out for 7,000 Lb 8 on 6-1/2 Hubs
- Q&A: Using 6000 lb Hubs on 7000 lb Axle
- Video: Comprehensive Review: Dexter E-Z Flex Suspension Kit
- Q&A: Should Leaf Spring Capacity Match Trailer Weight or Axle Weight for Best Ride Comfort
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Search Results: trailer tires and wheels
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Can MORryde Crossmember be Used with Roadmaster Comfort Ride System
- Q&A: Dimensions of the Roadmaster Comfort Ride Slipper Spring System
- Video: Review of EMCO Trailer Leaf Springs - 3 Leaf Slipper Spring 1500 lb Trailer Axle - EM53UJ
- Q&A: Recommended Roadmaster Comfort Ride Kit for a Trailer w/ 4,400 lbs Axles
- Article: Where to Position the Trailer Axle?
- Q&A: Replaced Leaf Springs On Tandem Axle Boat Trailer And The Rear Springs Are Tilting Rear Axle Forward
- Article: Double-Eye Trailer Suspension System Review
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - KE95EV
- Article: Trailer Tire Sizing
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Tire Chains

