To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's electrical junction box, which is located behind the driver's-side tail light. You will have to lift the storage lid in your cargo area and remove the panel on the driver's side to access this junction box. Once you've plugged in the T-connector, insert the 10-amp, low-profile fuse in position 2 and the 7.5-amp fuse in position 11 of the junction box (as shown below).
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (199 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Super fast delivery, good packaging. Just finished installation, including 4 pin wire harness, took me about 1.5hrs, instructions were excellent.Hardest part was lifting hitch up for alignment underneath, an extra set of hands would have been nice. Glad did myself, great product, love the powder coat, also saved a few hundred $$, thanks
Perfect fit and easy to install. The videos are an added bonus.
The adapter works very well. Make connecting a trailer very easy
Works exactly as it should. Was easy to install in my vehicle. Hides away nicely.
Was very simple, plug into fuse box & add 2 fuses. Discretely stores away when not in use. Arrived astonishingly in one day.
The products were perfect and very very very easy to installed. Thank goodness I decided to go with this company. I already mention it to friends and family.
This is a complete no BRAINER! Installed in less than 15 minutes and is plug and play. No tools, No wire ties or any other parts needed. 2019 Acura MDX. Tread the harness thru the slots, install the 3 fuses and away you go. Super Clean and Super easy.
Easy to install and no splicing required. This kit works great and doesn’t require any special modifications
This hitch was perfect for my new 2017 Acura MDX. The installation took about 20 minutes, that included gathering my tools!
Easy to install
Great product. Plug and play!
Installed this on our 2016 Acura MDX and couldn't have been more simple. I do recommend watching the installation video and you should be able to install this without even looking at the directions, but the printed instructions are pretty clear as well. This is a plug and play installation for my vehicle anyway and the testing LED worked well also. I chose to drop the harness down through the gromet in the floor pan instead of hanging it out under the tailgate for a cleaner installation but that is a personal preference. The entire installation took about 20 minutes.
great product with an easy install...highly recommend.
Product description was accurate. Easy installations instructions to follow. Customer service agent was knowledgeable kind and efficient.
Have used the hitch receiver in my MDX Acura without any problems at all. Strongly recommend this internet outfit and the brands they offer.
Louis P.
5/14/2017
All is well. Happy customer.
This is a great easy to install, after market, flat 4 trailer wiring setup for the 2014 MDX. Installation was very simple and quick. I returned my Acura OEM part once I verified this was working. The Acura part cost three times as much as this part. If you need brake wiring setup, you will need the Acura part.
Becky G.
11/17/2014
HI Mike,I also have a 2014 MDX and have ordered the Curt hitch and wiring harness. I called the Acura dealership to see if I needed the additional relay and they couldnt tell me. They could only tell me what was included in the Acura Trailer Hitch Kit. Am I correct in your comment above that you didnt need it? Did you have to get the brake wiring set up from Acura?thanks, becky
A basic wiring harness, meets its purpose very well. Arrived on time.
If you own an 2014-2017 ACURA, MDX, this is the simplest install imaginable. It took 20 minutes to install it and check it out. Only thing that was a little confusing was the extra parts and literature that are not needed for this modification. But really, just follow the instructions and you are done in a snap.
Russ W.
7/6/2018
Cannot find a better set of wires.
Really easy installation. All parts required were provided. Instructions were clear and concise. I'd buy another one from etrailer in a heartbeat.
Great customer service. Product worked as advertised. I wish they had a local store so I could have picked up the item, but I understand the situation. This was one of the best shopping experiences I have had lately.
It took about 2 hours to install the hitch and wiring, plus testing it.
Vern
5/16/2018
Very well built and no issues with the hitch or the wiring kit. I was missing a spade fuse in the kit but they sent one out to replace the one I installed.
This is a great plug and play product...great instructions with great photos. One complaint I might have is the little black box came with a double sided sticky pad that even though I cleaned the metal surface for, it won’t stick so for now I zip ties it to a body wiring harness. The harness won’t be needed very often in this case. They wanted the hitch more for hauling bicycles on a carrier. But when they do they will have to drape it out through the hatch. If you want to have the plug outside near the hitch you will have to find a place to run it through the body on yourself. The wiring on this harness is very good quality. Very similar to OEM, the connector too!
This is my fourth order from etrailer and like every other order, it was perfect, from order ease to shipping to installation.
Jay W.
5/12/2016
Great and flawless products, as always from etrailer.
I bought a Curt hitch for my 2016 Acura MDX and it fit perfectly. Also bought a Curt T-Connector Wiring Harness with 4 pole Flat Trailer Connector and, following the simple instructions, installation was quick and simple. I'm happy to recommend etrailer.com.
This Curt harness is the easiest install on trailer wiring I've ever done. The instructions were vehicle specific and very detailed. Of course the MDX is set up with a connector on a fuse panel that is made to accept trailer wiring so that makes Curt's job very easy but none the less it's a great product.
The video instructions for the trailer wiring package made the installation a breeze. Couple that with the ease of ordering on-line, fast delivery and fair price, I couldn’t be more satisfied with etrailer. I had previously ordered their after-market trailer hitch, and had the same great results. Great Company
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David B.
7/14/2018
Sold the vehicle where it was originally installed but purchased a 2018 same vehicle and installed one in the new one as well. Installation was exactly the same on the 2018 and product works well.