Round Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 10-1/2" Travel - 2,000 lbs

Round Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 10-1/2" Travel - 2,000 lbs

Item # TJB-2001S-B

lowest price pledge

Our Price: $35.85

Trailer Jack

Orders above $99 qualify for Free Shipping

Shipping Weight: 13 lbs

etrailer Trailer Jack - TJB-2001S-B
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

  • Side Frame Mount Jack
  • 2000 lbs
  • Sidewind Jack
  • No Drop Leg
  • Swivel Jack - Pull Pin
  • Weld-On
  • etrailer
  • 11 Inch Lift
  • With Foot
Round jack has a retracted height of 10" and an extended height of 20-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use. Lowest Prices for the best trailer jack from etrailer. Round Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 10-1/2" Travel - 2,000 lbs part number TJB-2001S-B can be ordered online at or call 800-298-8924 for expert service.

  • All Info
  • Reviews (11)
  • Q & A (3)
  • Videos (1)
  • Photos
  • Why etrailer?

etrailer Trailer Jack - TJB-2001S-B

Round jack has a retracted height of 10" and an extended height of 20-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.


  • Utility jack lets you raise and lower your trailer
    • Ideal for agricultural and commercial applications
  • Retaining-ring swivel design lets you swing jack up for storage, down for use
    • Deep-seated ring ensures extra side-load support
    • Convenient 1/2", spring-loaded pull pin secures and releases jack
  • Sidewind handle has zinc finish for attractive look and rust resistance
  • Outer tube has corrosion-resistant black powder coat
  • Inner tube and footplate have durable, rust-resistant, clear zinc finish
  • Welded-on footplate minimizes sinking in soft ground
  • Effortless greasing with built-in grease zerk
  • Weld-on mounting bracket included


  • Bracket height (from bottom of foot to center of mounting plate):
    • 10" Retracted
    • 20-1/2" Extended
  • Travel: 10-1/2"
  • Outer tube diameter: 2-1/4"
  • Inner tube diameter: 2"
  • Footplate dimensions: 7-1/2" long x 3-3/4" wide
  • Mounting bracket dimensions: 5" x 4-1/4"
  • Handle radius: 6-1/2"
  • Lift capacity: 2,000 lbs

Ram Dims

TJB-2001S-B Ram Round Snap Ring Swivel Jack w Footplate - Weld On - Black - Side Wind - 10-1/2" Travel - 2K

Video of Round Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 10-1/2" Travel - 2,000 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for etrailer Trailer Jack - Side Frame Mount Jack - TJB-2001S-B Review

Today we're going to be taking a look at a round snap ring swivel jack that comes with a foot plate. This utility jack is going to let you raise and lower your trailer. The jack is going to feature a lift capacity of 2,000-lbs. It's going to feature the retaining ring swivel design, that's going to let you swing the jack up for storage along the trailer frame, or you can bring it back down into the usable position. It's going to feature a deep-seated ring, inside this area right here, that's going to ensure extra side-load support, and it's going to have the convenient 1/2" spring loaded pull pin, that's this right here. This is going to secure and release the jack that way you can move it up to the stowed position, and easily bring it back down for use. This piece of raw steel, this is going to be the weld on mounting bracket, this is included.

This piece is going to get welded to the trailer frame. Just to show you how easy it is to use real quick, once you have that pull pin disengaged, it's going to allow these two components to rotate apart from one another. If you want it in the usable position, it would be just like this. If you want to move it to the stowed position, you'd rotate the jack. Again, this piece is going to be fixed to the trailer frame by welding it on, and so you can swivel it up for a stored position as well. Really nice design, very easy to operate, the pull pin has a nice little curve to it so you can get your fingers in there and easily gain some leverage to disengage or to engage it.

Again, really nice design. It's also going to have the side-wind handle, this is going to have a zinc finish so it's protected from the elements, and it's going to have a rotating, easy-grip design that way you can easily move the jack up, and you can lower it pretty simply. That handle's going to give us a handle radius, measuring from the center of where it mounts, to the outermost point of the handle, of 6-1/2". The jack is going to be made from a steel construction, so the outer tube on the jack is going to have a nice blac powder coat finish, that's going to do a great job at resisting rust and corrosion. Then the inner tube and the foot plate, that's going to be steel, and it's going to have a zinc finish, which is also rust resistant and corrosion resistant. You can see how easy it is to operate, nice fluid design, no kinking or binding.

Makes raising and lowering very easy. The foot plate's going to be welded onto the base of that inner tube, the foot plate's going to give us an overall width measurement of about 3-3/4" with an overall length measurement of about 7-1/2". That's going to do a great job at spreading out the weight that's applied to the jack, especially on softer ground, to prevent sinking. It's also going to increase stability. Maintenance is very simple with this jack, it's going to come with the included zerk fitting, this is for grease, so all you have to do is attach your grease gun, pump it in, and that's going to lubricate the internal components of the jack. A few more measurements that I want to go over with you real quick.

We're going to take a measurement of the bracket height, with the jack in the fully retracted position, so I'm going to lower it all the way back down. The bracket height's going to be taken from the bottom of the foot plate to the center of the weld on bracket. That's going to give us a bracket height, fully retracted, of 10". When I had it fully extended and did that same measurement, it increases to 20-1/2", again, that's in the fully extended position. This jack is going to have a travel or a lift of 10-1/2". The outer tube diameter is 2-1/4, the inner tube diameter is 2". Real quick we'll take a look at the weld on bracket dimensions. Measuring this direction, we're looking at about 5", top to bottom we're looking at about 4-1/4, and then the lip right here, that's going to have a depth of about 3/4". That's going to do it for today's look at the round snap ring swivel jack with the included foot plate.

Customer Reviews

Round Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 10-1/2" Travel - 2,000 lbs - TJB-2001S-B

Average Customer Rating:  4.9 out of 5 stars   (11 Customer Reviews)

Round jack has a retracted height of 10" and an extended height of 20-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.

- TJB-2001S-B

I welded this jack onto the 6x2 frame with the mounting bracket rotated flange down for better support and slightly increased height. Jack performs well under load. 635751

- TJB-2001S-B

The product worked exactly as I thought it would. The jacks are extremely high-quality heavy duty and a great value. I have come to expect this kind of quality and service from etrailer. I ordered it in the morning I had confirmation and shipment within 24 hours. I love the videos that etrailer puts on their site to understand the product . 579743

- TJB-2001S-B

The four jacks appear to be of good heavy duty quality. The handle has good movement (turns easily) and also seems well designed. The foot plate is 7" long. The pivot and lock plate engages easily. Quick shipping. The item arrived with some package damage but the heavy duty items were not damaged. Very happy with the value and ease of purchase. . 595643

- TJB-2001S-B

Just what I was looking for! Prompt delivery! Etrailer seems to always have what I need. 642878

- TJB-2001S-B

The TJB-2011S-B fit my existing snap-on mount, so I was very happy. The delivery was excellent due to the service department and shipping department quickly processing the order! Thank you. 615497

- TJB-2001S-B

seems to be a great quality trailer jack. just as described. etrailer just has so much useful info. on there easy to navigate site and fast shipping. Highly recommend using them to anyone looking for great parts and accessories. 550097

- TJB-2001S-B

LOVE the product and came as advertised. 101% satisfied. 491308

- TJB-2001S-B

Great price and quick shipping 439496

- TJB-2001S-B


- TJB-2001S-B

works perfect on my sawmill trailer 394156

- TJB-2001S-B

Ordered 4 weld on trailer jacks on Tuesday over lunch and they were delivered Thursday--free shipping! Price was very competitive and great service! Keep it up guys... 316780


Ask the Experts about this etrailer Trailer Jack
Do you have a question about this Trailer Jack?

  • Recommended Trailer Jack With 1,500 lb Capacity and Retracted Height of 12-3/4 Inches
  • The Fulton Snap-Ring Swivel Marine Jack with Fixed Length - 400 lbs # F1410050149 has a fixed height of 14-1/2 inches. We don't have a fixed height option for a 1,500 lb jack, so I recommend the Fulton Bolt-Thru Swivel Marine Jack - Bolt On # FXP15L which is shorter at the retracted height of 12-3/4 inches but also extends to 24-3/4 inches. I've attached a couple videos to assist.
    view full answer...

  • Can New Trailer Jack Be Installed On Trailer Using Same Mounting Hardware And Snap Ring
  • The snap ring, part # SNP-RING that holds the etrailer sidewind jack, part # TJB-2002S-B measures 2-inches diameter. If that is the diameter of the snap ring you need for your trailer jack it may work but there is no guarantee since it is designed for # TJB-2001S-B, # TJB-2001-Z, # TJB-2002-S, and # TJB-2002S-B jacks only.
    view full answer...

  • Installing a Swivel Jack on the Frame of a Cargo Trailer
  • The etrailer Round Snap Ring Swivel Jack w/ Footplate # TJB-2001S-B is a swivel jack that is designed to be welded on to the frame of a trailer. If you are looking to use hardware to install a jack rather than welding the jack to the frame, I recommend the Pro Series Round Swivel Jack # PS1400300303. The Pro Series jack is a bolt-on swivel jack that includes the hardware needed to mount to your trailer frame. This jack will fit frames up to 3 x 4 inches. The jack is similar in cost...
    view full answer...

Do you have a question about this Trailer Jack?

  • Why

    At we guarantee:

  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Cole B
Photos by:
Zach O
Written by:
Amanda M
Updated by:
Mike S

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.