Round Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 14-1/2" Travel - 2,000 lbs

Round Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 14-1/2" Travel - 2,000 lbs

Item # TJB-2002S-B

lowest price pledge

Retail:$40.09

Our Price: $35.47

You Save: 12%
Trailer Jack

Orders above $99 qualify for Free Shipping

Shipping Weight: 15 lbs

Quantity: 
In Stock
etrailer No Drop Leg Trailer Jack - TJB-2002S-B
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • Side Frame Mount Jack
  • 2000 lbs
  • Sidewind Jack
  • No Drop Leg
  • Swivel Jack - Pull Pin
  • etrailer
  • Weld-On
  • 15 Inch Lift
  • With Foot
Round jack has a retracted height of 15-1/2" and an extended height of 30". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use. Lowest Prices for the best trailer jack from etrailer. Round Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 14-1/2" Travel - 2,000 lbs part number TJB-2002S-B can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (7)
  • Q & A (4)
  • Videos (1)
  • Photos
  • Why etrailer?

etrailer Trailer Jack - TJB-2002S-B

Round jack has a retracted height of 15-1/2" and an extended height of 30". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.


Features:

  • Utility jack lets you raise and lower your trailer
    • Ideal for agricultural and commercial applications
  • Retaining-ring swivel design lets you swing jack up for storage, down for use
    • Deep-seated ring ensures extra side-load support
    • Convenient 1/2", spring-loaded pull pin secures and releases jack
  • Sidewind handle has zinc finish for attractive look and rust resistance
  • Outer tube has corrosion-resistant black powder coat
  • Inner tube and footplate have durable, rust-resistant, clear zinc finish
  • Welded-on footplate minimizes sinking in soft ground
  • Effortless greasing with built-in grease zerk
  • Weld-on mounting bracket included


Specs:

  • Bracket height (from bottom of foot to center of mounting plate):
    • 15-1/2" Retracted
    • 30" Extended
  • Travel: 14-1/2"
  • Outer tube diameter: 2-1/4"
  • Inner tube diameter: 2"
  • Footplate dimensions: 7-1/2" long x 3-7/8" wide
  • Mounting bracket dimensions: 5" long x 4-1/4" wide
  • Handle radius: 6-1/4"
  • Lift capacity: 2,000 lbs
  • Support capacity: 3,000 lbs


Dims

TJB-2002S-B Ram Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Side Wind - 14-1/2" Travel - 2,000 lbs







Video of Round Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 14-1/2" Travel - 2,000 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer Trailer Jack - Side Frame Mount Jack - TJB-2002S-B Review

Today we're going to be taking a look at the round snap ring swivel jack that does include a footplate. This utility jack is going to let you raise and lower your trailer, it's going to have a lift capacity of 2000 pounds, and a support capacity of 3000 pounds. It's going to feature the retaining ring swivel design that's going to let you swing the jack up for storage along your trailer frame, and then when you're ready to use it you can swing it back down into the usable position. It's actually going to feature a deep seated ring that's going to ensure extra side-load support, and its going to have the convenient half-inch, spring-loaded pull pin that's going to secure and release the jack. This piece right here, you can see that it's a raw steel construction, so it's ready to be welded on. This is going to be your weld-on plate or your weld-on bracket. It is included.

This piece is going to be the piece that welds onto your trailer frame, and then once you pull this pin, it actually allows the unit to swivel. That's going to allow you to easily move the jack up to a stowed position, or you can pull in and move it back down to a usable position, very easy to do, it's a really nice design. It's also going to have the side-wind handle. This is going to have a zinc finish so it is protected from the elements, and it's got an nice swivel grip design, easy grip design, that way it allows for very easy cranking. The handle radius for this handle, measuring from the outer edge to the center to where it mounts, that's going to give us a handle radius of about six and one quarter of an inch. This is a round utility jack so the inner tube and the outer tube is going to be a round design.

It's going to be made from a steel construction. The outer tubes going to have a black patter coat finish on it so it's going to do a great job at resisting rust and corrosion. The inner tube as well as the footplate, that's going to have a clear zinc finish to it, so it's going to have that corrosion resistant clear zinc finish which is going to further protect it from the elements, and from rust and corrosion. I do want to mention that the footplate is welded to the bottom of that inner tube. The footplates going to give us an overall length measurement of seven and a half inches with an overall width measurement of about three and seven eighths of an inch. It's going to do a great job of spreading out the weight, especially on soft ground to prevent sinking in, and its also going to help increase stability.

Maintenance for this jack is very easy. Located right here is going to be a built in Zerk fitting. It's going to allow you to attach your grease gun to it, pump the grease in, and lubricate the internal components. Few other measurements to go over with you real quick. I just want to mention the bracket height. For our bracket height measurements I'm going to be measuring from the bottom of the footplate to the center of that weld-on bracket.

With the jack in the fully retracted position, measuring to the center of the bracket we're looking at about 15 and a half inches, that's fully retracted. When I did that measurement with this fully extended that measurement increased to 30 inches, so that's going to give us a total travel of 14 and a half inches with this jack. The outer tube diameter is two and one quarter of an inch, let me extend it a little bit so you can see the inner tube. The inner tube is going to have a diameter of two inches. The jack is very easy to operate, it's got a nice, fluid motion to it, it does not bind or kink when you're raising or lowering. Last measurement I want to give you is just the measurement right here of the weld-on plate. Going this direction its going to measure five inches, and then from top to bottom we're looking at about four and one quarter of an inch, and then this lip, that's going to give us a depth, looks to be right around three quarters of an inch from the back of the plate to the outer edge of that lip. That's going to do it for today's look at the sound snap right swivel jack with the included footplate. .


Customer Reviews

Round Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 14-1/2" Travel - 2,000 lbs - TJB-2002S-B

Average Customer Rating:  4.9 out of 5 stars   (7 Customer Reviews)

Round jack has a retracted height of 15-1/2" and an extended height of 30". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.

- TJB-2002S-B
by:

The jack works great..I recently switched it for a weld on 5000 pound etrailer jack.... great company 561710



- TJB-2002S-B
by:

Great order email follow ups and prompt delivery.Thank you. 667995



- TJB-2002S-B
by:

Very happy with this jack. Worked perfect for the application it was purchased for as a pair of stabilizers for the rear of my utility trailer when loading my compact tractor. Quick and easy to operate. 589635



- TJB-2002S-B
by:

I got the product in a short time span wich was awesome and put them on my sawmill so no downtime and what can I say about the price just great and quality is excellent also Thanks Again Mr. Alain Laniel 554053



- TJB-2002S-B
by:

Replacing a lesser rated jack on our boat trailer. This replacement unit is well built, has great specs and was easy to install. Jack matches the description and arrived fast and packaged safely. 490792



- TJB-2002S-B
by:

All Good 432712



- TJB-2002S-B
by:

Fast turn around !!!!! shipped5same day 411933


7
7

Ask the Experts about this etrailer Trailer Jack

Do you have a question about this Trailer Jack?



Do you have a question about this Trailer Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Cole B
Updated by:
Sarah W
Updated by:
Amanda M
Updated by:
Mike S
Written by:
Amanda M
Edited by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924