bing tracking image
Q & A Icon

What Is the Shortest Snap Ring Swivel Trailer Jack Available for Better Ground Clearance?  

Updated 11/18/2026 | Published 11/17/2026

Question:

Im looking for a snap ring swivel jack for my trailer that has a retracted length of 9 or so. The one I have is 11 and frequently is too long and hits the pavement or dirt when trying to unhook the trailer. Closest I have found is your TJB-2001S-B at 10 retract length. Thanks!

0

Expert Reply:

Hello Steve,

Thanks for writing in. I can see why you're looking for a shorter jack, especially if your current one keeps hitting the ground when you're trying to unhook your trailer.

The Dutton-Lainson Swivel Jack # DL22686 you were looking at has an 11-1/2" retracted bracket height, so it wouldn't give you the additional clearance you need.

The Round Snap Ring Swivel Jack # TJB-2001S-B you also found is actually the shortest comparable option I could verify that we carry. It has a 10" retracted bracket height, measured from the bottom of the footplate to the center of the mounting bracket. It also offers 10-1/2" of lift and has a 2,000 lb lifting capacity. I wasn't able to find a comparable jack with an 8" or 9" retracted height. I attached an image of all the dimensions.

The # TJB-2001S-B would save you about an inch compared to your current jack, but I want to make sure that's enough to solve your problem. Is your existing jack attached to a welded-on snap ring bracket, and do you think that extra inch would give you enough clearance to swing the jack into position without hitting the ground?

expert reply by:
0
Kate F
Jack Dimensions
Jack Dimensions
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>