Swivel jack pivots up for travel and down for use. Rust-resistant zinc finish makes it great for marine use. Built-in grease zerk allows for simple greasing. Retracted height is 11". Extended height is 21-3/4". Weld-on pipe mount included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello neighbors. It's Brad here at etrailer. And today we're taking a look at the etrailer Round Topwind Pipe Mount Swivel Jack. Now this jack is gonna be a great addition or replacement for your old jack and this is gonna be rated at 5,000 pounds capacity but it's also has a 3,000 pound lifting capacity, so for our teardrop camper that we have here it's gonna work perfectly fine. Same with a popup or any really smaller camper that you might have, this is gonna work great. Now this is a topwind jack, meaning when you raise and lower, you're gonna be winding it from the top.
And this works out really well. We have the storage rack here and there's definitely a lot of clearance still yet to where we're not gonna hit anything as we raise and lower. It's also nice too, because when you have this in the stowed position, the handle moves over making it a little bit more compact. Now, as far as how much travel this has, it's pretty good at 10 and 3 quarters. Now, when it's fully retracted, you're gonna be sitting at 11 inches and then fully extended out it's gonna be 21 and 3 quarters.
So it's a little bit shorter than your typical jack. So if you have a taller frame on your trailer you might want to look at something that might be a little bit higher up but overall, this is gonna offer a decent amount of raise and lower to accommodate a lot of your smaller trailers. The topwind handle has a radius of seven and a half inches so it's rather compact but it's still easy to crank and lower. So just keep that in mind when choosing where to mount it and make sure that you're not busting your knuckles while doing it. Now, I really do like the topwinds a little bit better than the sidewinds, because generally of the sidelines you're having to kind of bend over and kind of crank with your whole body.
The topwind here you can kind of just nice and easy, crank and lower, assuming that you have that clearance around here. Now I mentioned before this is good for trailers with shorter ground clearance. And that's one of the things with some of your other jacks that don't swivel. They do kind of get a little bit worrisome when traveling because even if you crank them all the way up they're still pretty close to the ground. And that always worries me if you catch a road gator or a little blown out tire or a big rock or something along the road.
The ground clearance just isn't there and you do run the risk of potentially damaging your jack. Well, having a pipe mount pivot or a swivel jack here is really nice because when you are ready to hit the road you just pull this pin, swivel it back, and it's gonna be in a nice stowed position, and you're gonna gain a lot of ground clearance and not have to worry about that. This handle too bends over so you can kind of get this in a position to where really, the lowest point is just this bottom part of the jack pad but overall, you have quite a bit of ground clearance. Now, if you do already have a pipe mount welded onto your trailer, you're gonna wanna make sure that it does fit this one by measuring it. And the outside diameter should be two inches. And if you don't have one already welded on, no problem, it's actually gonna come with one. So that way you can mount it to your trailer wherever you need. Now, a jack is part of the trailer that you maybe don't think about until it doesn't work. And a lot of times, if the jack stops working, it's because it's seized up from build up of rust and corrosion. And the great part about this is it has a clear zinc finish, so it's gonna hold up to that corrosion long term and it's gonna make sure that none of this mechanism actually gets built up. So that way, when you need to use your jack it's gonna be easy to wind up and down. And just to keep it maintained, there's a little inserted grease fitting that's already there for your zerk. And that way, just a few spurts of grease and this thing will be maintained. Our foot plate is also zinc coated as well. And you can see that it's welded on so this is gonna be one piece. Some of the other ones, you have separate foot pads which is just, they kind of jangle around and make noise while you're going down the road. And really, it's just one more thing to lose where this being one piece and it's attached to the jack, you don't have to worry about it. And it's got a nice surface area here which is gonna give you a nice contact patch when lifting up your trailer. And that was a look at the etrailer Topwind Pipe Mount Swivel Jack..
Average Customer Rating: 4.9 out of 5 stars (186 Customer Reviews)
Swivel jack pivots up for travel and down for use. Rust-resistant zinc finish makes it great for marine use. Built-in grease zerk allows for simple greasing. Retracted height is 11". Extended height is 21-3/4". Weld-on pipe mount included.We received 5 boxes with these jacks. Three of the 5 boxes were absolutely destroyed in shipping. None of the jacks were wrapped in any kind of package but the cardboard box they shipped in. Most of them have scratches on them. We did not pay for a used looking jack.
Good welds, nice finish, smooth action up and down. This jack has met my expectations initially.
Good value for the price.
Great jack, used a pair on the back of my car trailer for stability. E trailer is a Great place to deal with!
Retailer made the process of purchasing products from them almost too easy. Not easy to find that these days. I'm in the process of getting my new jacks welded to my utility trailer. I'm positive they will fit my application perfectly.
Thanks
Exactly what I ordered
Thank you
Good product for a good price. Exact r eplacement.
Review from a similar Ram Round Topwind in Trailer Jack
Exactly what I needed for our Message board trailers. Great Quality and the Snap Ring is thicker than other brands. I cut the old bracket off and welded on the new one.
Review from a similar Ram Round Topwind in Trailer Jack
Does the job! Easy to install and functions without fault.
Review from a similar Ram Round Topwind in Trailer Jack
Arrived quickly. Fit on my trailer. Works great!
I particularly appreciated the information about the diameter of the swivel. I was able to replace my old jack without needing to change the mounting plate.
Review from a similar Ram Round Topwind in Trailer Jack
The only reason I didn’t give a five star is because only time will tell how the jacks hold up. Overall so far the jack looks like a good product.
Review from a similar Ram Round Topwind in Trailer Jack
Good inexpensive jack. I ordered two. My use for them is somewhat "off label". My 19" 9000# capacity flatbed trailer has a label on the dovetail indicating that the rear of the trailer should be supported for any loads over #3000. Personally I think supporting the rear for a trailer is always a good idea when loading and unloading. It puts less strain on the rear of the trailer and it prevents the trailer from lifting the rear of the tow vehicle during loading which can be extremely dangerous.
I had a friend weld the tube mounts on each side of the rear of the trailer. See pictures below. Now I don't need cribbing or chunks of wood to shove under the rear of the trailer. These will also adapt well to uneven ground. They can be stowed horizontally, like in the picture or removed when not needed.
Review from a similar Ram Round Topwind in Trailer Jack
Ordered 10 of these jacks for a project, and they arrived very quickly. They are replacements for a different brand, and seem to be very good quality and heavily built. Great price also I would order these again.
Review from a similar Ram Round Topwind in Trailer Jack
Hard to find a good jack for my custom inherited trailer. Old one was too short and wouldn’t crank up or down. This one was perfect replacement.
Came with a welding bracket but I won’t use that since going on an existing trailer. Jack works great and just snapped right on. The pull release is solid and engages really well. I’m happy.
Review from a similar Ram Round Topwind in Trailer Jack
A nice heavy duty jack that will serve me well. Great packaging and customer service is excellent. I plan on using this jack on my trailer that is made from an old model camper frame with an old model jack and large tongue frame. This trailer is used for hauling my side by side on hunting trips and for hauling my riding lawn mower. A+++++++
Review from a similar Ram Round Topwind in Trailer Jack
This was a perfect replacement for a prior jack that had bent and no longer fully retracted. An excellent value! It works perfectly to raiser, lower, and support an 1,800 lb trailer. I also appreciate the zerk fitting for easy greasing.
Review from a similar Ram Round Topwind in Trailer Jack
We bought this jack for a very small MC pop up trailer. Fits as described. Shipping was fast and the quality is impressive. Very sturdy. Still building so we have not tried it under more than 350lb. load. So far so good.
Review from a similar Ram Round Topwind in Trailer Jack
Jack was easy to install and videos provided were helpful.
Jack was much heavier than I thought and seems to be well constructed.
Just what I needed for my narrow frame/tongue.
Review from a similar Ram Round Topwind in Trailer Jack
I've used it a couple of times on the trailer out camping. Otherwise it is in constant use when the trailer is parked in the garage. Seems to work fine.
Review from a similar Ram Round Topwind in Trailer Jack
Well worth the money.Saves my back too!
Review from a similar Ram Round Topwind in Trailer Jack
It's a good Jack!
Review from a similar Ram Round Topwind in Trailer Jack
great website excellent service and del ivery
Review from a similar Ram Round Topwind in Trailer Jack
Worked as advertised. I got a request to rate this jack one year after purchase. The only downside was it took a couple months to ship, not etrailer.com fault, it was backed up (like everything else) due to covid. It has been used on a lawnmower trailer, loaded there is probably 400lbs tongue weight and the jack operates as advertised and expected.
Review from a similar Ram Round Topwind in Trailer Jack
Great product. Great selection for trailer function and ease of use. I'm glad I replaced my previous jack with this one. It works much better and I am really happy with it.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.