Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs
(347 reviews)
Price: $78.15
In Stock
Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs
Item # TJA-5000S-B
Our Price: $78.15
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (347)
- Q & A (0)
- Photos
etrailer Trailer Jack - TJA-5000S-B
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Sidewind Jack
- Bolt-On
- Weld-On
- A-Frame Jack
- Leveling Jacks
- Tongue Jacks
- 16 Inch Lift
- No Wheel or Foot
- etrailer
Black powder coated A-frame jack has a retracted height of 8-3/8" and an extended height of 24". The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.
Features:
- Utility jack lets you raise and lower your A-frame trailer
- Sidewind handle has zinc finish for attractive look and rust resistance
- Black powder coat finish resists corrosion
- External gearbox is easily accessible
- Effortless greasing with built-in grease zerk
- Footplate or caster sold separately
Specs:
- Bracket height (from bottom of inner tube to bottom of bracket):
- 8-3/8" Retracted
- 24" Extended
- Travel: 15-5/8"
- Clearance: 15" from bottom of bracket to top of jack
- Outer tube diameter: 2-1/4"
- Inner tube diameter: 2"
- Handle radius: 8"
- Lift capacity: 3,000 lbs
- Support capacity: 5,000 lbs
- 1-Year warranty
TJA-5000S-B Ram Round A-Frame Trailer Jack - Side Wind - 15-5/8" Travel - 5,000 lbs
Compare to Bulldog BD1700100317
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Package not accepted
- Product did not meet expectations
Customer Reviews
Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs - TJA-5000S-B
Average Customer Rating: 4.8 out of 5 stars (346 Customer Reviews)
Black powder coated A-frame jack has a retracted height of 8-3/8" and an extended height of 24". The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.by: Nick 05/16/2024
It bolted right on trailer and works/cranks easily. Nice it's greaseable as my trailer lives outside.
by: Ronald 03/08/2024
Great Jack. Works flawlessly. They shipped my order very rapidly the Jack was spot on in the decryption.
by: Roger S.08/12/2017
I modified spare tire location (needed more tongue weight), so replaced top mount crank jack with side wind version. Shipping speed was upgraded sans asking and received item just before my next trip. Installed in 5 minutes and jack is much more ergonomic than original. Whenever I need anything trailer or pick up truck related, I don't even bother shopping around, for etrailer pretty much has everything! Customer service is outstanding even with returns or replacements. Completely satisfied with product and service.
Thanks for everything Etrailer
by: Kent03/07/2024
Simple, strong, and reliable
by: Mark 01/31/2024
Work perfectly for the application we intended, as risers for a 30’ belt!
by: Ryan S.05/22/2024
Item arrived one day after expected date, but that was due to UPS. etrailer has it processed and out to UPS same day I ordered it, which was a Sunday too. Item arrived great. Was exactly what was described. I could not find this same jack at other stores. etrailer had exactly what I needed and it was cheaper, with a higher rating too. Will order from etrailer again.
by: Isaac 11/12/2023
Existing job site trailer jack broke Thursday. Menards, Home Depot, Northern tool, Mill didn't have the needed style in stock. Ordered it up and got here on Saturday. Perfect fit and higher weight rating than previous jack. Cranks smooth.
by: Sharon 02/08/2024
Jack was good product
by: Happy Camper III05/08/2024
This is a sturdy and easy to use manual jack. It is replacing a failed electric jack, and I am glad to have a manual jack of this high quality. It is the perfect size for my 3500 lb Rockwood Travel Trailer.
by: Billy 02/27/2024
Installed easy and has been working flawlessly. Had next day delivery.
by: Oscar06/14/2020
The TJA-5000S-B jack I ordered was exactly what I needed. It was easy to install. The photos show the old jack and the new jack that I needed so that I could mount 2 bikes on front of my Forrest River A-frame camping trailer.
by: William03/17/2018
I've had this installed on my utility trailer for about a year now. It works great. I've had some pretty big loads in it and have had no issues raising and lowering it with this jack.
by: Aaron07/05/2018
Package came very quick. Went right on to my trailer. The foot that "matched" the jack I bought did not work. Had to run to a local store and get one that would.
by: Jeremy04/08/2024
Great product
by: Eric F.07/03/2017
Product came on time, as advertised. Had a hard time believing the low price!! My old jack was so damaged I had to persuade it off with hammer and chisel, but then this jack went on in minutes. Functions smoothly. Couldn't be happier. etrailer has all my future trailer business. Five Stars.
by: Lucas 06/01/2023
The replacement tongue jack fit perfectly (hole alignment) and the movement is back to the way the original jack worked when brand new. Haven't used it in its full range yet, but so far looks promising. Just a little concerned about the top cover of the jack which appears that it would let rain water into the gear box. I applied a quart size zip lock bag which should keep the rain out.
by: Dennis09/16/2022
Works as advertised. Definitely a great price on this jack.. I use it daily on a 20ft trailer.. lets see how long it last me..
by: Jess02/18/2022
Works as intended. I have it on a small 20ft camper that weighs about 4k Lbs. I recommend adding grease and an adjustable bottom with a quick release pin.
Jess
3/10/2023
1 year later still working. No problems.
by: Steve03/22/2023
A long search for an American made jack led me to etrailer.com. Turns out the jack was made in China. Disappointed!!
Jenny N.
3/23/2023
We love to offer parts that are made in the USA. We do not offer a similar jack that is USA made however on any part that is, it will be listed on the product page as Made in USA.
by: Andrew 03/07/2024
Excellent service nothing but good thin gs
by: William09/08/2023
Jack works fine, but arrived with several dings and chips in paint. I realize it will probably get that way eventually anyway, but would expect it to arrive looking new.
Jenny N.
9/12/2023
These jacks arrive to us in large pallets which unfortunately does mean they are not in the best shape. I am happy to have Customer Service contact you.
by: RT02/16/2024
Worked perfectly. Easy to weld up and strong as ever!
by: David08/31/2023
Easy installation! Just three bolts and back in action...
by: Jeff 02/19/2024
VERY PROMPT SERVICE
by: CHAD C03/04/2017
I bought this for a basketball goal replacement and it worked out GREAT!! It raises the backboard with ease, and my 8 year old daughter loves it. It shipped out faster than I was expecting, and it arrived in just a few days. Awesome job towards Etrailer!!!!!!
I will definitely recommend Etrailer to anyone !!
25
347
Show More Reviews
See what our Experts say about this etrailer Trailer Jack
- Replacement Jack for 2014 Legend Enclosed Trailer with A-FrameIt sounds like you likely have an A-Frame trailer, so you can use something like the etrailer Round, A-Frame Jack - Sidewind - 15" Lift - 5,000 lbs # TJA-5000S-B which will attach to the 3 mounting points on the trailer tongue and provide you with a jack with 15" of lift. This jack doesn't come with a foot so you'll also need the Footplate for 2,000-lb and 5,000-lb Round, A-Frame Jacks # JF-99, which is designed for that jack. If you're looking for an electric jack then something like...
view full answer... - Bulldog Topwind Jack that Can Crank with Interference Near MountSounds like your trailer needs a jack with a topwind like the Bulldog part # BD155032. There isn't a way to relocate the handle of the jack you mentioned so a topwind would be your best choice. The topwind jacks can swivel and pivot as needed to which allows them to be even more flexible in how they can function.
view full answer... - Replacement Handle and Gear Kit for etrailer Side Wind JackWe offer a range of replacement parts for etrailer jack and many other jack brands. For example, if you have etrailer Round A-Frame Jack # TJA-5000S-B you can use Replacement Sidewind Handle # TJA-2000S-HD, Replacement Sidewind Gear Kit # TJA-2000S-GR or if you just need the handle, it is part # HDKB-BLK . If you can advise the jack's part number, I can check for the correct replacement parts.
view full answer... - Recommended Replacement Round Jack For Trailer CouplerIt is an easy replacement for you based on the picture you sent. The opening for most A-frame jacks require an outer diameter of 2-1/4 inches. I recommend you use a round jack like the Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs # TJA-5000S-B, it will be an easy fit without any change to the hole other than maybe cleaning up corrosion. For this application you will also want a footplate like # JF-99. This mount has all three elongated holes for easy mounting. The...
view full answer...
- What is Difference Between Bulldog Trailer Jacks BD155032 and etrailer TJA-5000S-BThe Bulldog A-Frame Trailer Jack # BD155032 is a topwind jack and the etrailer jack # TJA-5000S-B is a sidewind jack. Both of them are solid choices and have 5,000 lb capacities but the handles and how they are cranked are opposite of each other. The topwind jack spins horizontally when you raise or lower it and a sidewind cranks vertically. Sometimes clearances or interference with other accessories on the trailer may cause one style to be more advantageous than the other.
view full answer... - Replacement Trailer Jack on Horse Trailer to Replace Bulldog A-Frame JackFor an A-frame jack to replace the one you have now the I recommend the etrailer jack part # TJA-5000S-B that you referenced would work great. This has a 5,000 lb lifting capacity so it would easily handle the tongue weight of your trailer that is most likely around 850. For a foot pad you'd then want the part # JF-99. This jack is a sidewind jack with I think are easier to crank than the topwind.
view full answer... - Can an A-Frame Trailer Jack be Installed Using Screws and Nuts Instead of Bolts and NutsThe preferred method of installing an A-Frame trailer jack such as # TJA-5000S-B is to use bolts, washers, and nuts because it is a lot easier to get enough torque on a bolt and nut than it is with a screw and nut. Is there something that is preventing you from using bolts? Do you have a surplus of 3/8" machine screws? I haven't seen a trailer yet that used screws. Assuming you can get enough torque to properly secure the jack and the screws are appropriately rated for the application then...
view full answer... - Dimension of etrailer A-Frame Jack From Bracket to Bottom of TubeWhen the etrailer Round, A-Frame Jack # TJA-5000S-B is retracted the measurement from the mounting bracket to the bottom of the tube is 8-3/8".
view full answer... - Foot Plate for Round A-Frame Trailer Jack - Sidewind - 15-5/8For the 5,000 pound trailer jack # TJA-5000S-B you can use foot plate # JF-99. It was designed for 2,000 and 5,000 pound round A-frame trailer jacks that have a 2 inch diameter inner leg.
view full answer... - What Type of Grease Should Be Used To Lube the etrailer Round A-Frame JackThe etraielr Round A-Frame Jack part # TJA-5000S-B is not very picky when it comes to the grease type so you could use a high-temp wheel bearing grease like the LubriMatic LMX Industrial Strength Grease part # L11390 without issue. The manual for the Bulldog Round A-Frame Jack only calls for a generic automotive type grease which high-temp wheel bearing grease falls under. Please note however you will want to remove as much of the old grease as possible before installing the new grease.
view full answer... - Trailer Foot that Fits Trailer Jack # TJA-5000S-BThe # JF-99 fit your etrailer.com trailer jack # TJA-5000S-B.
view full answer... - Selecting Replacement A-Frame Tongue Jack for 1984 Wilderness TrailerYour photo shows that your A-frame tongue jack is a bolt-on side-wind type like # TJA-5000S-B and the others shown on the linked page. The etrailer jack # TJA-5000S-B and the Pro Series jack # PSRV20000103 that you referenced have inner tubes with an inside diameter of 2"-inches and outside tubes with diameters of 2-1/2 inches which is very common. It is not really possible to tell the jack brand from the photo. It appears the jack may have been repainted which may have covered up the...
view full answer...
- How Much Grease Should be Used and How Often to Grease Round A-Frame Trailer Jack TJA-5000S-BOn the Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs Item # TJA-5000S-B you will be good with about 3 or 4 pumps of grease from a grease gun. You will know it is too much if it starts oozing out somewhere! It would be a good idea to add grease 3 or 4 times a year but really it depends on several factors like how often the jack is used, how long it sits, the climate, and so on.
view full answer... - What Might Cause 12 Volt 7-Way Circuit to Blow When Using Powered Trailer JackIs the jack overloaded which is causing the excessive amperage draw? What jack do you have? Can you see an amperage rating on it anywhere which would give you an idea what it should be drawing? It's possible the jack screw/gear is damaged too which would cause the motor to have to work too hard for standard use which might overdraw it's power circuit.
view full answer... - Trailer Jack Recommendation for 19 Foot Springdale CamperI looked up your trailer and it has an A-frame style jack on it so for a replacement the Bulldog jack part # TJA-5000S-B would fit and work well. Unless you wanted to go with an electric jack to make raising and lower the jack easier. I think the best value for an A-frame tongue jack is the Stromberg Carlson # SC63VR which is rated for 4500 pounds of tongue weight. This is 1000 pounds more than other models, and even though you may not need this much capacity, you will find that the jack...
view full answer... - Availability of Round A-Frame Trailer JackWe have several A-frame jacks with round tubes like the etrailer part # TJA-5000S-B. In fact, most of our A-frame jacks fit this description which I attached a link to on this page.
view full answer... - Can Holes be Drilled to Add A-Frame Jack to TrailerYes, you can drill holes to add an A-frame jack to your pop-up camper if your current jack is getting in the way of your anti-sway bars. You will need to have a mounting plate to of some sort to drill into as opposed to drilling into the frame of your trailer. If you do not have one you would need to have a welder add one to the front of your trailer's A-frame and you could then add an A-frame jack! You could then add an electric A-frame jack like the Pro Series Round, A-Frame Jack # PSEA2000-14007. I...
view full answer... - Trailer Jack and Coupler Recommendation for Featherlite Bumper Pull TrailerThe Bulldog coupler part # BD44150WH301 is a really great choice for your Featherlite trailer. It'll be very reliable and easy to use so you'll really like it. Then for an a-frame jack we have the zinc coated etrailer A-Frame Round Jack # TJA-5000S-B which has a 5,000 lb capacity. Like I mentioned this has the zinc coating you are wanting which will fight corrosion and has more capacity than you'll need which means it will raise and lower easily. Trailer jacks are rated for their lifting...
view full answer... - Trailer Jack that Doesnt Hang Down Very Far for a Big Tex Utility TrailerDepending on the capacity you need I do have some A-Frame jack options you might like. Take a look at the Ultimate Trailer Jack # 322-RDJ-2K. It is more adjustable than other jacks and measures just 1-3/4" from the mounting bracket to the bottom of the leg with the jack fully retracted and the collar at the lowest setting. This jack is rated for 2,000 pounds. A wheel or foot will add more to that 1-3/4 inches so keep that in mind. For a wheel you can use # JC-102. For a foot you can use...
view full answer... - Landing Gear Jack Recommendations for a Livestock TrailerIf you are considering a dual jack setup like the part # BD500162 that's what I would recommend. Two jacks will offer more stability and since two jacks will be doing the lifting instead of one the cranking will be a bit easier as well. The easiest to use setup will be a powered landing gear set though as it would only require you to press a button. For that the Reese part # RP500708 would be a great option.
view full answer... - Difference in Side Wind Operated A-Frame Jack and Top Wind A-Frame JackThe choice between a side wind jack like the etrailer Round, A-Frame Jack - Sidewind, part # TJA-5000S-B, and a top wind jack like the Bulldog Round, A-Frame Jack - Topwind, part # BD155032, will usually be for clearance issues. A top wind jack will be used when there is something on the trailer that will interfere with the rotation of the side wind handle on the jack and a side wind jack would be used if there is interference for the top wind jack handle. If the clearance issues are not...
view full answer... - What Size Bolts Are Needed To Secure the etrailer Round, A-Frame Jack TJA-5000S-BThe etrailer Round, A-Frame Jack part # TJA-5000S-B does not come with hardware so you will need to supply your own. The bolts should be 3/8"-16 grade 5 but the length would vary depending on the specific trailer. That said, I would think 2-1/2" should be plenty.
view full answer... - Mounting Bolt Pattern of the Bulldog A-Frame Jack and is Hardware IncludedThe bolt holes on the etrailer Round, A-Frame Jack, item # TJA-5000S-B, triangle mounting flange are 3 inches from center of one hole to the center of the next hole. They are equally spaced apart and they are elongated for easier installation. A-Frame jacks are all the same size and have the same bolt-pattern. The manufacturers did this so they could simplify the manufacturing process for both bolt-on and weld-on A-frame jacks. The jack can be bolted on, hardware not included, or it can...
view full answer... - Black 5,000 lb A-Frame Jack with SidewindWe have a black jack with same specs and style as the Bulldog you referenced with the etrailer # TJA-5000S-B but the # BD155032 is not available in black and side wind. The # TJA-5000S-B is a 5,000 lb capacity sidewind jack that fits A-frames just like the Bulldog.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Cole B
Installed by:
Randy B
Installed by:
Aidan B
Updated by:
Wilson B
Updated by:
Ronnie R
Updated by:
Mike S
Written by:
Amanda M
Video by:
Zach D
Video by:
Charles A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Roger S.
8/12/2018
Still working fine. Smooth and easy operation. I seriously doubt that I’ll have any issues with the side wind trailer jack.