Replacement Jack for 2014 Legend Enclosed Trailer with A-Frame

Updated 02/10/2021 | Published 02/08/2021

Products Featured in This Question

Round A-Frame Trailer Jack - Sidewind - 15-5/8" Lift - 3,000 lbs - Black

(1043)

$92.91

Footplate for 2,000-lb and 5,000-lb Round, A-Frame Jacks

(94)

$9.69

Ultra-Fab Electric A-Frame Jack w/ 7-Way Plug - 18" Lift - 3,500 lbs

(310)

$271.46

Question:

I have a 2014 Legend Enclosed trailer that I need a jack for. Do you carry anything for this trailer? Looks like it has 3 bolts that bolts through a plate on the tongue. Its not a side mount

asked by: Larry R

Expert Reply:

It sounds like you likely have an A-Frame trailer, so you can use something like the etrailer Round, A-Frame Jack - Sidewind - 15" Lift - 5,000 lbs # TJA-5000S-B which will attach to the 3 mounting points on the trailer tongue and provide you with a jack with 15" of lift. This jack doesn't come with a foot so you'll also need the Footplate for 2,000-lb and 5,000-lb Round, A-Frame Jacks # JF-99, which is designed for that jack.

If you're looking for an electric jack then something like the Ultra-Fab Electric A-Frame Jack w/ 7-Way Plug - 18" Lift - 3,500 lbs # UF38-944037 is a great choice. This is designed for A-Frame trailers and will install the same way, but it's got a bit more lift travel and is designed for trailers with tongue weights of 3500-lbs or lower. I really like that this connects directly to your vehicle's 7 way connector for power so it doesn't require any wiring into the trailer at all.

I've linked some review videos of these two jacks for you to check out.

expert reply by: Erik B