Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
(125 reviews)
Price: $117.33
In Stock
Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
Item # AKHD-865-7-2-EZ-K
Our Price: $117.33
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (125)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKHD-865-7-2-EZ-K
- 8 on 6-1/2 Inch
- For 7000 lbs Axles
- Hub with Integrated Drum
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Easy Grease
- EZ Lube
- Pre-Greased
- 1/2 Inch Stud
- etrailer
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 5.2K - 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Zinc-enriched paint on drum adds durability
- Zinc-finished bolts resist corrosion
- Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings
- Lithium complex, multipurpose grease keeps bearings lubricated
- Bearings, races, grease seal, grease cap, and lug nuts are included
- QAI and CSA certified
Specs:
- Application: 5,200-lb, 6,000-lb, and 7,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles
- Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
- Actual drum dimensions: 12-15/16" diameter x 2-3/8" wide
- Works with 12" brake assembly
- Bolt pattern: 8 on 6-1/2"
- Wheel studs: 1/2" diameter x 1-5/16" long
- Grease cap flange diameter: 2.72"
- Weight capacity: 3,500 lbs
- Limited 1-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: 14125A (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: 14276
- Grease seal (included): GS2250DL
- Inner diameter: 2.25"
- Outer diameter: 3.376"
Thoroughly Tested for Safety
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
KBD2-865-19 AxleTek 12" Hub and Drum Assembly for 5,200-lb, 6,000-lb, and 7,000-lb Axle with Hardware - 8 on 6-1/2 - EZ Lube - Pre Greased
Compare to Dexter 42866UC3-EZ
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased - AKHD-865-7-2-EZ-K
Average Customer Rating: 4.7 out of 5 stars (125 Customer Reviews)
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 5.2K - 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.by: Todd02/07/2024
Customer service and ordering was great, product great but how they're packaged did not survive. Missing 2 of 4 hub grease caps and 2 of 4 bent beyond use. I used the old caps
by: Christopher05/18/2023
axeltech brake drums seem to be sufficient. Although different from the OEM. Some of the issues where shipping. UPS damages every box from etrailer. So far anyways.
by: Christopher05/11/2023
Dimensions are different but may line ok. Grease cap damaged
by: Michael05/24/2023
Bought 4 hubs for my trailer and every single box was destroyed and the dust/grease caps were all bent. 4/4 were so bent they were unusable. I had 4 spares I keep in the toolbox luckily or I would’ve been waiting for more parts. Hubs are great but packaging/delivery/dust caps very poor
by: Daniel07/06/2023
Although not as robust (heavy) as the original Dexter hub and drum it fit perfectly and the manufacturing quality was acceptable.
However, I suggest stronger packaging as the package the drum was delivered in was damaged, and fortunately the drum was not.
by: Mark06/02/2023
They were a perfect fit on my 7000 lb Dexter axle. Liked that they came fully greased and ready to slide right on. Some of the dust covers were bent and unusable but the mix of new and old covers I got the job done. I would recommend them to anyone who has the proper axle fit. Will buy again when I need them again in the future.
by: Jon M.06/10/2017
Excellent company to work with. As with previous orders, fast, FREE shipping is always appreciated.
Items arrived exactly as described, properly packaged, in unblemished condition.
All parts included for installation, WITH THE EXCEPTION of the cotter pins for the axle nut(s). Those are easily found at the local hardware store, but would have been nice to have new ones with the package of new parts. Definitely recommending your business to family and friends. Thanks again!!
by: Keith03/28/2021
Nice to have the bearings packed and seal already in. The only thing is the drum looks to not be as heavily built as the Dexter drum that came off my 5th wheel! The new one does not have the cooling fins on the drum like the Dexter does! In time i will see if its as good as the Dexter!
by: Darin02/11/2023
Bought these to save myself time by getting pre packed drums. When they arrived, I found several problems. They come with plastic caps to cover openings. The inside cap came off on all 4 and spread grease on the inside of all the drums. The outside cap came off on 2 allowing the outside bearing to come out and spread grease everywhere inside. The other two outside bearings were not packed.
Not happy with this purchase. Ended up spending an hour cleaning and packing bearings.
Darin
2/13/2023
I appreciate the explanation but I am not referring to the dust caps that are installed. I am talking about the shipping grease plugs they installed to prevent the greased bearings from coming out during shipping
Jenny N.
2/13/2023
My mistake! I read the review as having installed the hubs and then experienced the issues. I will have my Customer Service team reach out as yes, those PLUGS should also not come loose in shipping. I am sorry it was a mess to clean up.
by: Kris04/10/2018
Thanks for the excellent service of etrailer. The product got delivered very fast at home. The drum was in perfect shape and easy to install on the fifthweel.
by: Joe 02/17/2020
Great product at half the price as the big brand name. etrailer has been great to deal with now and in the past with a highly knowledgeable staff and as always fast delivery.
Thanks again
Joe B.
2/17/2021
So I have never used it because I bought it so I would have a spare in the event I broke down on the highway. As for the quality it’s as good as the major brand that is twice as expensive. I wouldn’t have a problem buying another one when I need it .
by: Billy Jo Bob05/17/2017
Great parts, included all the hardware for easy installation. My wife had no problems at all putting these on my trailer.
by: Casey 11/08/2023
This was an absolute perfect fit. Gwen was amazing with her product knowledge and patience with me. I am a DIY'er and had no clue as to what I was looking at! Gwen walked me through step by step on how to make sure we had the correct product! This was an amazing experience! Thank you Gwen!!
by: Kevin c09/17/2016
I just did a 1300 mile trip and everything went smoothly with my drums and bearings
by: Charlie P12/23/2016
Troy, the service rep that I dealt with on my most recent order from etrailer.com, did a fantastic job helping me identify the exact parts I needed to replace the wheel bearings and brake assemblies on my 40 foot Big Horn 5th Wheel. I believe the prices were very reasonable and the service was faster than I expected. Thanks Troy, and I'll definitely recommend etrailer.com as a super place to get your trailer repair parts and accessories.
Charlie P.
12/27/2017
All the products are working well!
by: Gary 05/10/2023
Excellent customer service and very knowledgeable associates.This was my second purchase from E trailer and shipped and arrived promptly.
by: Jayman08/01/2020
I put these hubs on my trailer with new brake assemblies.
Next working day approximately 15 miles my right rear wheel and tire go spinning off into the woods and I'm leaving a trail of sparks.
All five lugs had snapped off,wheel was gone forever and I had to unload my Bobcat,go put on one of the old hubs and the spare.
So I will
Not be purchasing again.
by: David08/02/2019
First step was the ordering, Talked to Steve and he was very well versed on what I needed. He gave me his direct line so after I got my bearing #’s and call back it took only minutes to finalize the order. I ordered on Wednesday and received everything on Friday. Wow, Great service. Doubled checked all the items and everything was perfect. Buying the assembly is the way to go. Very quick install. Great experience.
by: Thomas 09/28/2021
Great part fit perfext and saved time
Thomas G.
10/1/2022
Everything in my order fit perfectly and got me on the road
by: Dick T.09/19/2018
Installed 4 of these on my 5th Wheel RV along with Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K
Item # AKEBRK-7-SA. Better than original.
by: Dean07/15/2018
Direct replacement, 1st time ever for trailer work, easy!!! Did the pads/backing plate as well. If you order the correct part you will be done in no time and save money.
These guys are great if you ask question or if you search for answers they are most likely posted here.
by: Joe06/06/2019
Fit and work perfectly for a year now. The new drum come with all the parts needed and with the new bearing races installed. By with confidence @ etrailer.com
Joe
6/7/2020
Brakes are working great no issues. ??
by: Jay06/21/2023
5 star. Parts worked great, no issues and shipping was promptly
by: Lonnie06/28/2019
Dexter brake drums are much heavier made and appear to be much higher quality. I bought these cheaper drums due to the cost difference, but I will not buy the cheap ones again for the application that I will be using. The trailer is a Toy Hauler and even though it is listed on the application for these drums, I prefer to have the best parts.
25
125
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- How To Grease AKHD-865-7-2-EZ-K HubsThere is not an exact amount of grease per each hub for part # AKHD-865-7-2-EZ-K but I recommend LubriMatic LMX Industrial Strength Grease part # L11390 which will be more than enough. First pack the bearings, like you already did. Spread a small amount of grease on the spindle. Insert your bearings and grease seal in the hub and mount the hub on the spindle. You just want to pump grease slowly into the spindle with a grease gun like part # L30200 until you see grease seeping through...
view full answer... - Lippert Part 176502 Axle Replacement Options With Hub/Drums and Brake AssembliesThanks for including the product number and photo of the sticker. Your axle actually has a hub face to hub face of 95.5 inches and spring centers at 74.5 inches with a 4,400 lb capacity. This isn't a direct replacement so you have a couple of options. You can either upgrade to a larger axle and weld spring seats in the correct locations or you can use an axle-less system. The Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 95" - 5,200 lbs # 6340624-EB...
view full answer...
- Recommendation Of 7000-lbs Axles To Replace 5200-lbs Axles On Fifth WheelUnfortunately the standard axles in our selection available have a maximum capacity of 3500-lbs. I do have a Timbren Axle-Less Trailer Suspension Item # TASR7KS01 option which would also replace your suspension. Timbren systems provide smooth, quiet, and safe rides without the need of an axle. Timbren systems also give you an independent suspension for better handling. It also has a 7000-lbs weight capacity. You would also need new trailer hub-and-drum assembly like Item # AKHD-865-7-2-EZ-K....
view full answer... - Concerns Regarding Zerk Fitting With EZ Lube Hubs Working Well For Fifth WheelsI certainly understand your concern regarding grease getting into the brakes or filling the inner hub. However, this rarely happens with any of our EZ lube Trailer Hub and Drum Assemblies like Item # AKHD-865-7-2-EZ-K. If it is the right size and you install everything correctly, you should not have any problems. The zerk fitting actually makes lubing bearings much safer and more effective. The key is not to overfill and to use the correct parts for your fifth wheel hub and drum assembly...
view full answer... - Recommended Brakes, Hubs, and Tires for Timbren 5200 lb Axle-Less SystemThe Timbren Axle-Less Suspension - Spindle Only - Regular Tires - 5200 lbs # ASR5200S01 will use the 12 inch electric brakes and hubs so you are correct the 10 inch tires won't fit. I recommend brake assembly # AKEBRK-6 and hub/drums # AKHD-865-7-2-EZ-K. These will fit the spindles you referenced. The smallest compatible tires will be 16 inches based on the capacity. The tires that are the smallest as you recommended are 30.78 inches in diameter. They are the Castle Rock ST235/80R16...
view full answer... - Most Cost Effective Hub/Drum and Brake Assemblies for 7k Trailer Spindle TRU37FRThe most cost-effective hub/drum that fits the spindle part # TRU37FR is the part # AKHD-865-7-2-EZ-K and then for brake assemblies part # AKEBRK-6R for the right hand side and part # AKEBRK-6L for the left hand side.
view full answer... - How to Determine Replacement Hub for M416 Military Trailer Due to the age of the trailer, we will want a little more information to make sure we get you the correct hub and drum assembly and brake assemblies. The best way to choose a replacement hub is by using the bearing and grease seal part numbers that are stamped into the metal cage of the bearing and the rubber of the seal. With these part numbers, I can cross reference the correct hub. We've had a few people ask for similar hub replacements for your M416 trailer and we've given them this...
view full answer...
- Will etrailer.com Hub and Drum Assembly AKHD-865-7-2-EZ-K Fit 5,200 lb AxleThe Trailer Hub and Drum Assembly # AKHD-865-7-2-EZ-K does have the same bearings and seal that you would find for one that fits a 5,200 axle so it should work. Even though this is the case it is always best to double check before purchasing. Pull your hub and verify that you have a # 25580 inner bearing, # 14125A outer bearing, and grease seal like part # GS-2250DL with an inner diameter (ID) of 2.25". If this is the case then you are good to go! If you can find parts numbers then simply...
view full answer...
- Will the etrailer Hub part # AKHD-865-7-2-EZ-K Fit Behind a 16 inch WheelCertain hub/drums are so large in diameter that they won't fit behind a smaller wheel. The part # AKHD-865-7-2-EZ-K that you referenced can fit with a 16 inch wheel that has a 8 on 6-1/2 inch bolt pattern though. I attached a review video for this hub for you to check out as well.
view full answer... - Timbren Axle-Less Suspension Dexter Brake Assemblies and etrailer Drums.I would be happy to help you. The Dexter Trailer Hub and Drum Assembly item # 42866UC3-EZ will not work with the Timbren Heavy-Duty Axle-Less Trailer Suspension item # TASR35HDS11 because the outer bearings are different sizes. You need the etrailer Easy Grease Trailer Hub and Drum Assembly item # AKHD-865-7-2-EZ-K. This hub and drum assembly will fit perfectly with the Timbren Axle-Less Suspension and the Dexter Nev-R-Adjust Electric Trailer Brake Kit item # 23-458-459.
view full answer... - Spare Trailer Hub that is Pre-Greased for Hub with Bearings 14125A and 25580We have the etrailer hub part # AKHD-865-7-2-EZ-K which matches the bearings, bolt pattern, and is pre-greased like you are wanting as well.
view full answer... - Self Adjusting Brake Assemblies to Replace B12E-22The brake assemblies you have now are the # AKEBRK-6 so for a self-adjusting setup you'd want the part # 23-458-459. Then for a 7k hub with an 8 lug bolt pattern you'd want the part # AKHD-865-7-2-EZ-K.
view full answer... - Parts Needed to Convert Brakes on M105A2C TrailerI don't have much information on the M105A2C but I imagine it isn't far off from the M105A2. The existing brakes are likely air over hydraulic. You can stick with hydraulic and convert to electric over hydraulic but I recommend switching to electric brakes. This is the option most people choose when converting the brakes on these trailers. I'm not 100% sure on your axle but from what I was able to find it looks like it isn't over 7,000 lbs. Assuming that is true, and your drums are in...
view full answer... - Replacing Tandem Torsion Axles On a Bison Living Quarters Horse Trailer Rather than installing the Timbren Silent Ride Suspension for Tandem Axle Trailers # TSR14K35T01 that will require you to also purchase all new axles to complete the install I recommend getting 2 sets of the Timbren Axle-Less Trailer Suspension System # TASR7KS01. With the Timbren # TASR7KS01 you will have 4 wheels that act independently of each other. The axle centerline on these is 3-1/2" from the bottom of the frame rail when unloaded and will deflect 1-7/8" to 1-5/8" from the bottom...
view full answer...
- Pilot Diameter of Easy Grease Trailer Hub and Drum AKHD-865-7-2-EZ-KThe pilot diameter is 2.72 inches for the Easy Grease Trailer Hub and Drum Assembly # AKHD-865-7-2-EZ-K. This hub and drum is for 5,200 lb, 6,000 lb, and 7,000 lb axles that have inner bearing 25580, outer bearing 14125A, and grease seal GS2250DL. It has an 8 on 6-1/2" bolt pattern as well, which is important because that's the bolt pattern your wheels will need to have in order to fit the # AKHD-865-7-2-EZ-K hub and drum.
view full answer... - Hub/Drum and Brake Assemblies For a AL-KO 5,200LB Axle You will need to verify the size of the grease seal used on your ALKO 5,200LB axle to find the correct hub. The inner diameter will be either 2.125" or 2.250" for the grease seal. 2.125" Inner Diameter Grease Seal 6 on 5-1/2" Hub/Drum Assembly # 8-201-9UC3-EZ 8 on 6-1/2" Hub/Drum Assembly # 8-219-4UC3 2.250" Inner Diameter Grease Seal 6 on 5-1/2" Hub/Drum Assembly # AKHD-655-6-EZ-K 8 on 6-1/2" Hub/Drum Assembly # AKHD-865-7-2-EZ-K We also have the Dexter Electric Brake Kit # 23-105-106-09...
view full answer... - Replacement Trailer Hub and Drum Assembly For Dexter K08-219-96The K08-219-96 hub is the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2 # 8-219-4UC3-EZ. You can alternatively use the Trailer Hub and Drum Assembly, 5.2K - 7K E-Z Lube Axles - 12" Diameter - 8 on 6.5 - Pre-Greased # AKHD-865-7-2-EZ-K but the grease seal will need to be replaced with Grease Seal - Double Lip - 2.125" ID - 3.376" OD # GS-2125DL to fit your spindle and hub.
view full answer... - Availability of 8 on 6-1/2 Hub and Drum Assemblies for the Timbren Axle-Less Suspension ASR35HDS02We do have some hub and drum assemblies that you can use with the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR35HDS02 which have an 8 on 6-1/2" bolt pattern. Our Trailer Hub and Drum Assembly # AKHD-865-7-2-EZ-K has a 12" diameter and comes with the needed bearings and grease cap for your application. It does come with a grease seal, but you will need to use part # GS-2125DL (Qty 1) or part # RG06-090 (Qty 2) for the correct seal for the smaller spindle. If you don't already...
view full answer... - Max Torque Rating for 1/2" Studs on 7K Axle Hub and Drum AssemblyFor hubs that have 1/2" studs, like the Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles # AKHD-865-7-2-EZ-K you're looking at, you don't want to exceed 120 ft-lbs as that's the most torque this stud size can handle. Since you have 17-1/2" wheels I do recommend going all the way to 120 ft-lbs. If your wheels have a 9/16" stud (like most 17-1/2" wheels that fit with coned lug nuts do) I recommend going with the Hub and Drum Assembly # AKHD-865-7-1-EZ-K instead. This has the...
view full answer... - Does Trailer Axle Determine Overall Capacity and Recommended 7,000 Pound Hub and Drum A trailer axle will typically be the best indicator of its overall capacity, but there are other components that may contribute to this as well. A trailer is always going to be limited by its weakest component. So, a trailer with two 7,000 pound axles will indeed have a capacity of 14,000 pounds, assuming that all other components on the trailer also match or exceed this rating. For example, if the trailer has two 7,000 pound axles but the hubs, wheels, or frame itself have a smaller rating,...
view full answer... - Replacement Parts For Lippert 7,000LB Trailer Axle On Kaufman TrailerYour Kaufman Trailer with the 7,000lb Lippert axles will use a Bearing Kit # BK3-200 to rebuild the axles. This will be all you need if the brakes and hubs are still in good condition. If the brakes are worn you can replace them with the Dexter Electric Trailer Brake Kit # 23-180-181 or upgrade them to the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-464-465 so that you will no longer need to adjust the trailer brakes manually. The Easy Grease Trailer Hub and Drum Assembly #...
view full answer... - Replacement Brakes and Hub/Drums for 7K Trailer Axles on 2005 Forrest River Cardinal 33LXYes, to replace the brakes and hub/drums on your 7K axles you need the following: - Self-Adjusting Trailer Brakes # TRU96FR - Hub and Drum Assembly # AKHD-865-7-2-EZ-K (1/2" studs) - Hub and Drum Assembly # AKHD-865-7-1-EZ-K (9/16" studs) The brakes fit either way, you just need to choose the correct hub drums that match your current studs so it fits with your current equipment just fine. I've attached some isntallation videos for you to check out.
view full answer... - Locating Replacement Trailer Hubs and Drums for Mobile Home AxleIn order to see if there is an 8 or 6 lug replacement hub and drum assembly that will fit the axle on your trailer, you will want to first pull the existing hub. Once the hub is pulled, check for the bearing numbers that should be stamped onto the bearings themselves. If you cannot locate these numbers, you can also measure the spindle at various locations where the bearings sit. I have attached an image that shows where these measurements should be taken. I recommend using a digital caliper...
view full answer...
- Replacing Axles on a 2021 Apex Nano Dual Axle Trailer With a Timbren Silent Ride or Axle-Less SystemA Timbren Axle-Less system or Silent Ride system would definitely upgrade the stock leaf spring set up on any camper or trailer. That being said, there are a couple things to keep in mind when choosing one of these systems.. The Timbren Axle-Less System # ASR5200S01 will replace the axles as well as the leaf springs. This will also give you independent suspension, which will handle nicely when towing, especially over uneven ground. The only caveat with this system, is that it specifically...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Randy B
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Kathleen M
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
2/13/2023
I have a few questions for you about the experience with the grease caps. What kind of spindles does your trailer have? This hub assembly comes with two different kinds of grease caps, one for regular spindles and one for EZ lube sprindles. The EZ lube spindles will have grease zerk fittings on the end of them. The grease cap to use with it will be the one with the black rubber center that you can remove to access the grease fitting. The regular spindle would use the solid grease cap that would then contain the grease. The grease caps, of course should not fall off, however it sounded like it was possible that the EZ lube grease cap was used with the regular spindle so I wanted to ask. I look forward to your reply.