Product Experts Available Now!
Call 1-800-940-8924
CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 12" Wheels - Qty 1
(548 reviews)
Price: $34.50
In Stock
CE Smith
CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 12" Wheels - Qty 1
Part Number: CE17701G
In Stock
$34.50
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (548)
- Q & A (0)
- Photos
CE Smith Trailer Fenders - CE17701G
- 12 Inch Wheels
- For Single-Axle Trailers
- Steel
- 24 Inch Long
- 7 Inch Wide
- Bolt-On
- Weld-On
- Silver
- No Step
- CE Smith
7" Wide x 23-1/2" long x 6-1/2" tall. Made of 16-gauge steel, this round, pre-galvanized fender can be painted to match your trailer. You get both a stylish look and years of use. It bolts to your trailer and fits 12" wheels.
Features:
- Round fender covers 1 tire on your single-axle tire trailer
- Acts as a splash guard - keeps road debris from hitting other vehicles and helps to protect your trailer's cargo
- Sturdy, pre-galvanized, 16-gauge steel construction
- Can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish
- Weld-on or bolt-on installation
- Not pre-drilled
- Mounting brackets for bolt-on installation sold separately
- Made in the USA
Specs:
- Application: single-axle trailers with 12" diameter wheels
- Dimensions: 23-1/2" long x 7" wide x 6-1/2" tall
- Quantity: 1 fender
- Weight: 4 lbs
Pre-Galvanized Steel
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The edges of the pre-galvanized parts often lose their zinc coating during the stamping process. Because of the thinness of the coating (less than 1 mil) and the fact that the edges remain exposed, pre-galvanized parts can begin to oxidize and rust quickly, so it's recommended that they be primed and painted.
17701G 16-Gauge, Pre-Galvanized Steel, Single-Axle Trailer Fender by CE Smith - 12" Tires
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.8
548 reviews
by:
Mac
10/09/2023
Quality product, solid gauge metal. Replaced my old galvanized trailer fenders perfectly once welded in. Galvanization a bit weak, so used 2 coats ZRC Cold Galvanizing compound both sides after welding on to further life expectancy.
by:
Richard L.
08/15/2012
price and is of excellent quality. I also bought the brackets recommended for this fender and they are also of the best quality and fit perfectly. Installation was easy; just buy the correct hardware and drill a few holes. I couldn't end this without saying the dealer (etrailer.com) was one of the best online retailers I have ever dealt with. Shipping was done immediately and arrival was quicker than I would have asked for. Overall rating for the dealer and product is EXCELLENT. I will soon replace the other fender with the same one so they match better.
by:
Donald
09/25/2026
Nice product. Very sturdy. So wish it came pre-finished but seems worth the price paid.
by:
Tim
04/29/2013
The fender is exactly what I needed for my project.
I did however have to contact customer service to figure out the exact Radius/Diameter of the fender. But cutomer service was very prompt and knolagable.
I did however have to contact customer service to figure out the exact Radius/Diameter of the fender. But cutomer service was very prompt and knolagable.
by:
Peter
09/07/2021
fit perfect and strong enough to stand on.
pic of fenders and light brackets
pic of fenders and light brackets
by:
jack
07/25/2013
Nice Fenders. A blown tire wiped out my originals but these are great replacements ~ I could not go plastic! thanks for the product in steel.
by:
Stewart Wylie
05/16/2020
Great product, just as I hoped it would be. Highly recommend
Stewart W.
5/17/2021
Fantastic
by:
Rachel
02/19/2025
Worked great, I added a 2nd pair of fenders to my trailer and moved the axle back to make the trailer stable and it worked and the fenders matched what I had from years ago
by:
Pap Yota
11/17/2013
I'm converting a PTO log splitter to self powered with its own engine. I had to weld up an axle for the torsion suspension and initially had no way to mount these fenders until I rigged up a short section of angle iron to stand in for a trailer frame. I didn't buy the brackets but ended up making basically the same thing when I custom bent some flat stock to support the fenders. Buying the brackets would have been lots easier but hindsight is 20-20! I think I'll leave them unpainted since they turned out so nice.
by:
Rick
06/13/2015
Great fender for the price,thick,strong..Excellent customer service you never have to wounder about shipping or your order status.
Rick
7/8/2016
Fenders and brackets have worked great and held up very well. Defiantly would purchase them again.
by:
Richard
12/23/2021
Trailer fenders arrived within 3 day as promised, quality was perfect, exact fit/ form replacement at the best price on internet with free shipping. I Used clamps to align on original brackets, marked holes with a sharpie, then Drilled and installed the pair in 45 minutes Suggest including or selling separately a hardware kit. Spent more time going out to buy galvanized fasteners than entire installation process
by:
Robert
09/09/2019
Excellent product, ordered fender with the mounting brackets, used existing bracket mount holes in the trailer and existing bolts, installed in about 15 minutes very happy
by:
Dave B.
06/16/2020
Great product, replaced the old rusted brackets, rails and plastic fenders with new galvanized brackets and fenders and beat up rails.
by:
Scott
10/04/2025
Exactly what I wanted
by:
Harry
09/14/2019
After looking at various vendors with no success I tried etrailer.com. I'm pleased to report these fenders are formed well without warps, rust or ragged edges and are a good fit over the 12" wheels on my boat trailer. The shipping box was sturdy and well sealed.
Sturdy heavy gauge steel will not wobble at highway speeds and will hold up well to rocks coming up off dirt roads in rural areas.
Good job etrailer
Sturdy heavy gauge steel will not wobble at highway speeds and will hold up well to rocks coming up off dirt roads in rural areas.
Good job etrailer
by:
Loc
03/05/2018
I am very pleased with the products (one trailer tire size 5.30-12, a set of two galvanized trailer fenders for 12" tires and a shackle) that I purchased. I have not put them together yet but the package arrived on time and well packed. Everything looks good. Thanks.
by:
Chris N.
06/13/2017
I couldn't be more pleased with a supplier than I am with etrailer.com. They have what I need. Their prices are fair. They deliver in a timely manner. The product delivered fulfills the expectations I had after reading their site/catalog description in every way. Bravo, etrailer! Many thanks.
by:
Roger
10/31/2022
Service was great, delivery was ahead of time. Second or third time using etrailer for parts and they did great. Phone rep was knowledgeable and helpful.
by:
Joseph
09/14/2018
I received my new fenders and brackets for my trailer on time and it was packaged very well. etrailer had the best price and explains everything in a video. Their quality of products are exceptional. I have purchased from etrailer before and they are always very helpful and have great products..I have passed along their website to friends. Great doing business with etrailer.
by:
Jerry
08/08/2016
Fit my boat trailer just fine. Exactly what I needed. Thanks again etrailer.
by:
James
05/01/2024
great quality stock material - strong and will not bend. I ordered one to meet my needs and it is not as long (when measured around its circumference of its' diameter) as the one that was left on the trailer. I am using it none the less since a fender serves more a visual than functional purpose. I am very happy with what I have.
by:
Richard L.
10/10/2012
addition to my trailer. I already replaced the other fender with the same product, and I can't say enough about the quality and aesthetics. It enhances the looks of the trailer and I am very happy with my decision to purchase this fender from Etrailer.com.
by:
Jack R
12/27/2014
I like the galv. fenders. Looks like the fenders I needed to complete my trailer project. And fast shipping. Thanks!
25
548
true
Show More Reviews
See what our Experts say about this CE Smith Trailer Fenders
- Looking For Trailer Fender 6" Wide, 24" -26" Long and 6" TallThe CE Smith Single Axle Trailer Fender # CE17701G you found is the closest we have to the exact dimensions you are needing. This fender is 7-1/16" wide, 23-1/2" long and 6-1/2" tall. If this is not going to be able to fit your trailer you can try your local trailer store as they should have a catalog with many other fenders which can be special ordered.
view full answer... - Parts Needed for Converting 8" Wheels On CE Smith Multi Sport Trailer from 8" to 12" Wheel and TireYes, you can change the wheels on the CE Smith Multi Sport Boat and Kayak Trailer # CE48810 from 8" to 12". This would give you a trailer like the CE Smith Multi Sport Plus Boat and Kayak Trailer # CE48870. To complete the conversion you will need 2 of the Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel # AM30590 and 2 of the CE Smith Single Axle Trailer Fenders # CE17701G to move to the larger tires.
view full answer... - Replacement Fender for Harbor Freight 1915 TrailerThe dimensions we need to find a replacement fender are the length, height, and width. For example, the Fulton # F008551 is 7.35" wide x 21-1/2" long x 6.5" tall. The # HP99VR which seems to match the style of many Harbor Freight trailers is 24" long x 8" wide x 8" tall. For a third option that is designed for 12" wheels we have the # CE17701G which is 23-1/2" long x 7" wide x 6-1/2" tall. I would compare these to your length, width and height to see if they come close. If not, I would...
view full answer... - What is the Radius of CE Smith Single Axle Trailer Fender CE17701GIf by radius you mean the length of a line segment from the center of a sphere to its perimeter then it is 11-3/4 inches given that the overall length of the fender # CE17701G is 23-1/2 inches. Because the fender is not a true half circle, this does not represent the actual dimension of the radius. Because two of these fenders placed together would not make a complete a circle, the actual radius would be unobtainable and would most likely be slightly less than 11-3/4 inches. Fulton...
view full answer...
- Need Suggestion on Fenders That Fit 12" Wheels?If you currently have 8" wheels and want to eventually to upgrade to 12" wheels, I recommend CE Smith Trailer Fenders # CE17701G. I recommended these fenders because these can either be bolted-on or welded-on to make for a simpler install. These fenders are 23-1/2" Long x 7" wide x 6-1/2" tall. Made of 16-gauge steel, this round, pre-galvanized fender can be painted to match your trailer. You get both a stylish look and years of use. It bolts to your trailer and fits 12" wheels. If you...
view full answer... - Tire and Fender Upgrade on CE Smith Trailer for Boats and PWCs # CE48810According to my contact at CE Smith their Trailer for Boats and PWCs # CE48810 can indeed take 12-inch wheels, with only new fenders required as you noted. I have linked our main page for tire/wheel combinations in the 12-inch size and with the 5-on-4-1/2-inch bolt pattern used for the CE Smith trailer. For a galvanized wheel-with-tire in Load Range B you can use part # AM30590. Please note that all trailer tires in this size are rated to speeds up to 65-mph maximum. We do not offer any...
view full answer... - Replacement Galvanized Steel Fenders For a 1998 Escort Single Axle Boat TrailerHere is a list of our single axle boat trailer fenders which are galvanized. You will need to verify which will work best on your 1998 Escort boat trailer. CE Smith Single Axle Trailer Fender 8" Wheels # CE17700G CE Smith Single Axle Trailer Fender 12" Wheels # CE17701G CE Smith Single Axle Trailer Fender 13" Wheels # CE17800G CE Smith Single Axle Trailer Fender 14"-15" Wheels # CE17900G
view full answer... - Looking for Replacement Steel FendersI have looked through the various steel trailer fenders we offer, and have not found any that match the exact measurements you provided. The closest fender I found was the CE Smith Pre-Galvanized Steel Fender, part # CE17701G. This fender measures 23-1/2 long by 7-1/16 inches wide by 6-1/2 inches tall (see photo).
view full answer...
- Recommended Larger Wheel/Radial Tire for Boat Trailer with 4.80 x 8 TiresA 4.80/4.00-8 tire like # AM10002 would have a diameter somewhere in the neighborhood of 16 inches. They're typically mounted on a 8 x 3-3/4 inch wheel with a 4 lug on 4 inch bolt pattern. Going 'up' by 2 sizes for a radial tire would give you a ST145/R12 tire on a 12 x 4 inch wheel with a tire diameter of 21.3 inches which will put your tire about 2-1/2 inches closer to your fender. To avoid the tire bottoming out on the underside of the fender, we like to see a minimum of 3-4 inches...
view full answer... - How to Paint Galvanized Steel Replacement Trailer FendersA galvanized steel fender like # CE17701G has a corrosion-resistant zinc coating applied to it, while a raw steel fender like # CE17720 does not. Both types can be painted, but it will be easier to paint the non-galvanized part. In either case the parts should be thoroughly cleaned with a mild detergent to remove any residual oil or grease and a suitable primer should be applied before paint. For a galvanized fender you will need to use a water-based primer. Do not use a petroleum-based...
view full answer... - Trailer Fender Recommendation for 4 by 6 Cargo TrailerFor a metal trailer fender the part # CE17701G would be a great option for a smaller trailer like what you have. I attached a picture of what it looks like installed on a similar trailer. I also attached a review video for the fenders. For install brackets the part # CE26061G-2 would be a great option as well.
view full answer...
- Replacement Fender for 2009 Yacht Club Galvanized Trailer Unfortunately your photos did not come through. I can help you with a single tire fender, but we don't carry any tandem axle fenders. It sounds like you are looking for galvanized steel fenders, so here are those options: CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel--- 8" Wheels # CE17700G 12" Wheels # CE17701G 13" Wheels # CE17800G 14" and 15" Wheels # CE17900G 15" Wheels # CE17937G Then we have the Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized...
view full answer... - Plastic Fender Available that Fits the CE Smith Boat Trailer # CE48810We do have a plastic fender that is similar to the CE Smith Single Axle Trailer Fender # CE17701G which comes with the Trailer # CE48810 but we don't have an exact replacement. The galvanized fender measures 23-1/2" long x 7" wide x 6-1/2" tall and the closest plastc fender, part # F008542 from Fulton, measures 23-11/16" long x 7-1/2" wide x 8-11/16" tall. The Fulton fender is a white plastic and is slightly larger than the CE fender but it should work great for your application. The...
view full answer...
- Metal Fender Recommendation for PWC TrailerWe offer several metal fender that could work for your trailer (see attached link), but none of them are going to bolt directly to your current trailer fender brackets. A trailer fender like the part # CE17701G would work well on a smaller PWC trailer like what you have but mounting holes would need to be drilled in it. I attached a dimension picture for the fender as well as a review video for you to check out.
view full answer...
- Fender Option for Upgrading Malone EcoLight Trailer to 12" WheelsHey Mike! Since you upgraded your Malone EcoLight MPG586XB from the original 4.80-8 tires to 4.80-12 tires, the original fenders will sit too close to the larger tires. A 4.80-12 tire is about 20.7" in diameter compared to roughly 16" for the original 4.80-8 tire, so you would need to either relocate the existing fenders higher or replace them with fenders designed for 12" wheels. Typicallly, you want around 3" of clearance between the top of the tire and the underside of the fender. We...
view full answer... - Fender Radius on Trailer Fenders # CE17701G # HP29VR and # HP69VRAll of the fenders you referenced have a 1 inch radiused lip on the edge of the fender. The numbers you referenced in the first two part numbers # HP29VR and # HP69VR are the overall length of the fenders. The # HP69VR is 28 inches long and the # HP29VR is 32 inches long.
view full answer... - What is the Width of the CE Smith Single-Axle Trailer Fender # CE17701GThe CE Smith Single-Axle Trailer Fender, # CE17701G, has an actual width of 7-1/16 inches. I pulled the fender from our warehouse and made a video showing you with width and I also attached a close-up photo of the measurement. If you find that this trailer will work for you, you may also be interested in the Fender Mounting Brackets, # CE26061G-2. We recommend using 3/8 inch stainless steel bolts with stainless steel nuts and lock washers to mount the brackets to the fender.
view full answer...
- Fender That is Close to 7-1/4 Inches WideWe do not have any fenders with the exact measurement you are looking for which would allow you to graft into your existing one though I can tell you the ones we have which are the closest: - CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 12" Wheels # CE17701G measures 23-1/2" Long x 7" wide x 6-1/2" tall - CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 8" Wheels # CE17700G measures 20" long x 7" wide x 6" tall - CE Smith Single Axle Trailer Fender - 16 Gauge...
view full answer... - Availability of Non-Galvanized Version of Trailer Fender CE17701GThe only other version of the CE Smith Pre-Galvanized Trailer Fender part # CE17701G that we offer is the aluminum version part # CE17701ATB.
view full answer... - Trailer Fender AvailabilityI really wish we had something even close to what you are looking for, but the only thing wide enough for what you are looking for is the part #HP66VR at 13 inches wide which is way too long and tall for what you are looking for and it doesn't have a backsplash. This fender is 13" Wide x 36" long x 20" tall. The closest thing we have in the length you want is the # CE17701G which is too skinny but a little bit too short. This fender is 23-1/2" Long x 7" wide x 6-1/2" tall and it doesn't...
view full answer... - Recommended Replacement Fenders for Corrosion ResistanceWe have the CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel Fender # CE17701G but we do not have any galvanized options that don't still require paint for best corrosion resistance. Pre-galvanized has a zinc coating that is thinner than the requirement for fully galvanized and thus doesn't have the same resistance to corrosion. If you want the superior corrosion resistance and non-painted look, you may want to consider the aluminum fender options. We have the CE Smith Single...
view full answer... - Finding Trailer Fender for 12 Inch WheelsWhen looking at fenders for your trailer, you will just need to make sure you choose one that is compatible with your existing wheel size. The CE Smith Single Axle Trailer Fender # CE17701G that you are looking at is designed for single-axle trailers with 12 inch diameter wheels, so will work nicely for you. This particular fender is made of 16-gauge steel and can be used for either a weld-on or bolt-on installation. I have included a short video review on this product for you to check...
view full answer... - Steel or Aluminum Fenders Similar to the Redline Plastic Single-Axle Fender for 8 to 12 Inch TiresWe have a few steel and aluminum fenders that are very similar to the Redline Plastic Fender for 8 to 12 inch wheels, # PF775X21W, but they are not exact matches. For 8 inch trailer tires, we offer part # CE17700G (steel). For 12 inch tires we offer part # CE17701G (steel) or # CE17701ATB (aluminum). The fenders for 8 inch tires measure 20 inches long by 7 inches wide by 6 inches tall and the fenders for 12 inch tires measures 23-1/2 inches long by 7 inches wide by 6-1/2 inches tall. If...
view full answer...
Do you have a question about this Trailer Fender?
Info for this part was:
Updated by:
Lindsey S
Updated by:
Wilson B
Updated by:
Alexander C
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Written by:
David L
Installed by:
Cole B
Video by:
John S
Test Fit:
Kevin C
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mac
10/11/2024
Great, strong fender... works well to stand on and maintain my 2 jetskis... no rust, even on spots where I didnt paint with ZRC cold galvanizing compound, and we run salt environments exclusively....