When you need to haul seriously heavy loads, the Curt Pintle Hook is your go-to with an impressive 30,000 lbs gross towing weight capacity and a tongue weight of 8,000 lbs. Its made from solid, forged steel that can take on the most demanding towing tasks, ensuring your equipment gets where you need it without a hitch.
Easily secure the Curt Pintle Hook onto your vehicle with its bolt-on design. Mount it safely to a pintle hook plate using the included hardware. Its straightforward installation means you can focus less on setup and more on getting the job done right.
With a durable black powder coat, this pintle hook features a high-gloss finish that resists rust, keeping it in top condition no matter the weather. From the salty air by the coast to snowy mountain roads, this hook stands up to the elements, ensuring a long-lasting sleek look.
Hooking up to different trailers? No problem. This pintle hook is designed to fit lunette ring couplers from 2-1/2" to 3". It provides the flexibility you need for varied towing applications, making it a versatile tool for any towing arsenal.
Worried about your connections coming loose on the road? The tethered safety pin that comes with the Curt Pintle Hook keeps your load secure, offering dependable safety as you travel. It's the little things that take the stress out of big jobs.
The predefined mounting hole dimensions (1-3/4" apart vertically and 3-3/8" apart horizontally) along with a 9/16" hole diameter make your installation precise and hassle-free, ensuring a snug fit every time for robust performance.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Aiden here with etrailer. Today we're gonna be taking a look at these Curt bolt-on pintle hooks. These are gonna be separate pieces that bolt on to a platform that goes into your hitch, that allows us to select whatever drop height we want and then bolt the pintle hook to the platform. This gives us adjustment, to make sure that we're towing our trailer level. But at the end of the day, these are pintle hooks, these will allow us to tow a lunette ring trailer. And the three versions you see here today are gonna be three different weight capacities.
Functionally, they're the exact same, they're gonna work the same way and offer the same hardware, and the same mounting locations. But they really just vary in weight capacity, so let's check 'em out. So the one we have hooked up today will give us a gross trailer weight rating of 30,000 pounds, that's how much weight it can pull. And the new max tongue weight of 8,000 pounds, that's the maximum vertical load limit on the end. The smaller version here, it's gonna look pretty much the exact same.
That's gonna have a gross trailer weight rating of 20,000 pounds, and a max tongue weight of 4,000 pounds. And then the smallest of the bunch, the one that looks just slightly different on top here, is going to have a 10,000 pound gross trailer weight rating and a 2,000 pound max tongue weight. So you can kind of pick these out to match the platform you're mounting it to and your trailer, and make sure that it's up to spec, based on what you need as far as weight capacity goes. Now using this and hooking it up is really straightforward. You've got your pin and safety clips that are just included with the pintle hook and kept in place with the cable.
Once that's out, you can lift this handle and lift up on the top, hook up to your lunette ring trailer, and drop it down in place and re-pin it when you're done. But, we'll open this up and back up the truck. (Aiden attaching hook) Now, all three of these weight capacities will work with lunette rings that have a diameter of two and a half or three inches. And they're also gonna have the same bolt patterns on the back to hook up. And again, they all do come with hardware.
Now for the hole spacing, vertically center on center, that's going to be one and three quarters of an inch. And then from side to side, that's going to be three and three eighths of an inch. For the most part, that should be very standard and match up with most of the platforms out there. But double check the measurements just to be safe. You can mix and match brands if you like. We've tested these ones out, with a couple other ones for two and a half inch hitches today, and they worked out just fine. And then of course, you can find some for other hitch sizes if need be. And overall, I think these are gonna be a really solid option for some pintle hook hookups. If you're looking for a bolt-on option, I think these will do just fine. There's of course other options within the category, if you need one that maybe has a ball for a standard coupler on there, so you can use a standard coupler and a lunette ring trailer, those options are available. I'd also recommend maybe looking into an option where you don't have to bolt it on at all, it's just a one piece design. A lot of those just come straight out from the hitch, so there's no height adjustment. But in the case of our trailer today, we don't really need height adjustment. We're not using that feature and utilizing it, so there's no need. But if you do need that height adjustment this can be a way to go. Now if you're looking for adjustment to use with multiple trailers and you frequently need to change how much of a drop you have, you might look for a system that has easier adjustment, rather than bolting it on. Something from BMW or Curt, both have really solid options in terms of adjustment where you just pull pins and drop it down. Or, loosen bolts on the back to make your height adjustments. Again, it's just a simpler process to make it work. So if you do have multiple trailers, that can be a better option. But they are more expensive, and if you don't need that, then there's no point in spending the money on it. You can just go with something like this, bolt it into the right height that you need, set it and forget it, and you'll be good to go. Of course, be sure to pick up a platform for it if you do choose to go this route. And make sure that everything is weight rated appropriately for your whole towing setup. But that'll do it for our look at these Curt bolt-on pintle hooks. Thanks for watchin'.
Do you have a question about this Pintle Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.