What is the Radius of CE Smith Single Axle Trailer Fender CE17701G

Question

Question:

Im looking for a fender for a project Im working on. Can you tell me the radius of this fender and perhaps the dimensions of a few other fenders in the 7inch to 7-1/2inch width?

asked by: Mike

0

Expert Reply:

If by radius you mean the length of a line segment from the center of a sphere to its perimeter then it is 11-3/4 inches given that the overall length of the fender # CE17701G is 23-1/2 inches. Because the fender is not a true half circle, this does not represent the actual dimension of the radius.

Because two of these fenders placed together would not make a complete a circle, the actual radius would be unobtainable and would most likely be slightly less than 11-3/4 inches.

Fulton fender # F008550 and # F008540 are 7 inches Wide x 20-1/4 inches long x 6-1/4 inches tall with a "radius" of 10-1/8 inches.

Fender # CE17700G is 20 inches long, 7 inches wide, and 6 inches tall with a radius of 10 inches.

Fender # F008559, # F008549, and # F008569 are 7-3/8 inches wide, 22-3/8 inches long, and 6-1/2 inches tall with a radius of 11-3/16 inches.

Fender # F008582, # F008592, and # F008572 have side steps so they are a little different. Overall length is 33-1/2 inches, 7-1/2 inches wide, and 8-3/4 inches tall. But the radius is closer to 11-3/8 inches.

Fender # F008551, # F008561, and # F008541 are 7-3/8 inches wide, 21-13/16 inches long and 6-1/2 inches tall with a radius of 10-7/8 inches.

Fender # F008542 is 7-1/2 inches wide, 23-11/16 inches long, and 8-11/16 inches tall with a radius of 11-15/16 inches.

Fender # HP89VR is 28 inches long, 10 inches tall and 7 inches wide with a radius of 14 inches.

Fender # CE17700ATB is 20 inches long, 7 inches wide, and 6 inches tall with a radius of 10 inches.

expert reply by: Michael H

0

click to enlarge

Answer 1

We have a couple of options that may work for you that are designed to work with trailers that have 12 inch wheels and are very close to the 25" x 8" fenders you currently have. One is rounded and one is a Jeep-style (more square) and if…

view full answer...

Answer 2

In order to choose the correct replacement trailer fenders for a trailer you'll need to know both the style and wheel size. These two things will then get you the best match possible. The Fulton Single Axle Trailer Fender part #F008582 for…

view full answer...

Answer 3

I attached one picture that shows how some will use the L-brackets part #PF775-BKT-2 to install the Fulton Fenders part #F008582. You will need to drill through the fenders in a couple places to use the brackets as there isn't a bracket setup…

view full answer...

Answer 4

According to my contact at CE Smith their Trailer for Boats and PWCs #CE48810 can indeed take 12-inch wheels, with only new fenders required as you noted. I have linked our main page for tire/wheel combinations in the 12-inch size and with the…

view full answer...

Answer 5

Hello Mark, thanks for reaching out. I looked over a few pictures of these 2007 5x10 snowbear utility trailers, and we may have a fender that will work as a replacement, but we do not have anything that will directly replace it as far as bolting…

view full answer...

Answer 6

Hey Tom, thanks for the picture and all the information! The 25-1/4" Long etrailer Rust-Resistant 3-Leaf Double Eye Spring item #e93SR, you were looking at will probably work just fine but I still recommend measuring to confirm. Leaf springs…

view full answer...

Answer 7

The pilot diameter on a wheel, like the one with part #AM30620, is the diameter of the bigger hole that is directly in the middle of the wheel. The pilot hole diameter of the wheel for the part I just measured is 2.84". I have attached a picture…

view full answer...

Answer 8

Hello JT, At this time we do not have mounting brackets that bolt up directly to the etrailer Single Axle Trailer Fender w/ Side Steps - Black Plastic - 13" Wheels - Qty 1 #HP93RR. I reached out to the team that in charge of our etrailer parts…

view full answer...

Answer 9

Yes, you can change the wheels on the CE Smith Multi Sport Boat and Kayak Trailer #CE48810 from 8" to 12". This would give you a trailer like the CE Smith Multi Sport Plus Boat and Kayak Trailer #CE48870. To complete the conversion you will…

view full answer...

Answer 10

The CE Smith Boat Trailer #CE48810 that you referenced is equipped with 4.80/4.00-8 bias ply tires that feature a maximum speed rating of 65 mph.

view full answer...

Answer 11

The wheel and tire in the size of 215/60-8 that you referenced like part #AM3H310 are 8 inches wide. For a fender that would be wide enough you would need to go with one like the part #CE17800G which is setup for larger 12 inch wheels. The size of…

view full answer...

Answer 12

The 205/65-10 and the 20.5 x 8-10 would be very close in size. Assuming that 20.5 is the diameter of the tire and 8 is the width. The Kenda 205/65-10 Bias Trailer Tire with 10 inch White Wheel, #AM3H390, for example, is 8.3 inches wide with a…

view full answer...

What is the Radius of CE Smith Single Axle Trailer Fender CE17701G

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching