9" Wide x 32" long x 15" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone, I'm Ellen here at etrailer.com, and we're going to be taking a quick look at the single axle trailer fender. This is going to provide that protection from anything getting kicked up onto your trailer and the gear that you have loaded up there, or the equipment, or vehicles, or whatever you might have in your trailer. So to keep rocks debris, road, salt, water, mud from slinging up there and causing a mess. It also helps to protect your vehicle and other vehicles around from the same thing, from things slinging up from beneath your tires, so it's always important to have your trailer fenders in place.This one in particular is going to be made out of a 16 gauge cold rolled steel, so it's going to be very nice and durable, weighs about seven pounds, and should make a good addition to your trailer. The front edge, it might be kind of hard to see, this is going to be a rolled edge here. It has a 1" radius, and then the back is at a 90 degree angle.
So you can weld this onto your trailer or mount it with hardware, it's kind of up to you on that. It does not come with any hardware, but it does have a plain finish, so you can weld this in place. Once you do, of course, it's a good idea to prime and paint the fender to make sure that it doesn't start to rust, otherwise, it will.Get this flipped back around, and we can talk about measurements. This does work for a 15" diameter wheel. The fender itself from edge to edge measures about 32" long, pretty much right on there, and then from front to back it's about 9" wide and about 15" tall, it looks like it's just shy of that, maybe.
Yeah, it's pretty much right at 15". It does not have any pre-drilled holes, again, so if you want to use a bolt-on design, you will have to drill those out on your own, and again, the brackets that you would need for that are sold separately.It's made in the USA. It does just come as a single axle. You can use this on either side of the trailer, it doesn't really have a left or right to it, so you can get two of these and use one for either side, if you'd like. But that's pretty much all there is to it for our look at the single axle trailer fender.
I hope this has been helpful in deciding if this is the right one for you. We do have a lot of other options available here at etrailer.com, so check them out. Thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (1265 Customer Reviews)
9" Wide x 32" long x 15" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.The fender(s) turned out great. My goal was to match the front fenders on John Milner's '32 Ford 5 window coupe in America Graffiti. For more specs, it was a 14" fender split in two and as you can see from the picture it sits well on the 17" tires.
Product delivered a head of promise date! The fenders were in good shape. The packaging was fair. The installer had no issues. I would buy this product again. I appreciate the on time delivery and the customer service. Thanks to all!
have ordered several of these fenders. they work out great for my trike building. thanks etrailer.
My father and I built my little trailer from scratch. We purchased a wiring harness, electrical clips, fenders, and a safety chain from etrailer. We are extremely happy with our products and the customer service we received!
Delivered as promised, nice unit
Tim - 01/09/2018wonderful company to do business with. All are personable and willing to help with any needs. We need more companies to copy etrailer.
Shipment was in transit on day it was ordered, arrived two days later, well packed, no damage. One comment, someone who packaged for etrailer must have a brother who sells heavy-duty staples for closing shipping boxes closed, staples secured the shipping box every inch and a half or so. Refreshing not to have box broken open, parts damaged or missing, etc.
Product received better than I expected. I personally am using these as wheel tubs on my 1966 C10 pick. More than happy with my purchase. Top notch service!!!!!
Tim C - 01/12/2016I like working with you guys. You always have great application info on your web site to help me before I make my purchase. Delivery was prompt and parts were packaged great. I haven't finished my project yet but i have carefully checked all the parts I purchased for my new project and they are of great quality. Thanks!
The fenders were just right and required (state law) for my glider trailer. As I had to make my own brackets to support the fenders and attached to the trailer frame, most of the work was in that area. After arranging all and confirming they worked, I road tested the trailer with the glider inside and made only one small adjustment. After painting the fenders and hardware, they were installed and look great. They were the right size, weight and easy to paint.
So far so good, a good fender.
Glenn - 05/17/2020Product is great, just as discriped. Service outstanding, ordered early Friday afternoon shipped late Friday, received Wednesday late morning. Thank You George. Shipping 1/4 the of competitors making overall costs cheaper. Thank you etrailer
This is my first purchase from Etrailer. I ordered two fenders and the plug-in that goes from the trailer to my truck for a smoker project I am just starting on. I am in awe over how quickly I received my order and that everything was exactly what I ordered. I did, at first, have some concerns because the tracking number was not working. I sent an email asking why it was not working, got a response in about an hour and the issue was fixed. The fenders were packaged very well and had no damage whatsoever. The plug-in was packaged in a bubble wrap envelope and was in perfect condition as well. I am very pleased with the whole process and will always use Etrailer moving forward with my build
Just as described. This fender is an exact match for the one it is replacing. Very sturdy and appears to be able to withstand the punishment that it will endure. Thanks!!
We put these fenders on a salvaged camper trailer - turned flatbed utility trailer. The quality seems great, fit exactly as intended, and took primer and paint just fine. We're very happy with the finished product. Great product and outstanding business transaction.
Really happy with the item. Great choices and super great checkout. Product arrived very timely and fit perfectly. Not some thin junk...this was a nice thick OEM fender. Highly recommended.. I will definitely use etrailer.com in my & my businesses future.
I installed bigger tires on a single axle trailer and that required different fenders. I was pleased with the end product and the etrailer folks were great to work with.
The customer service I received was outstanding. My order went out at 11:30 pm and etrailer had my shipping upgraded within the next twenty four hours at no extra cost! A dimensioned diagram of the products would be helpful in picking out the right products though. However, I still received exactly what I was looking for. I am using these as rear fenders on a mini truck so I need the quality to be show worthy. The fenders showed up well packaged, not a scratch, and were exactly as I ordered. Overall, great service and product quality.
These fenders are an exact replacement for the old fenders I removed from my trailer. They came in perfect condition, clean, no sign of surface rust. and no dents. They are now painted, ready for me to install. They came quickly, also.
Ordered Fenders, lug nuts and wiring harness for my trailer. All arrived in a timely manner and fit perfectly!
Very impressed with this company. Quality product, faster than expected delivery and great communication.
Tom N - 05/02/2019I almost made the fenders myself, then I discovered these from etrailer.com. I can't make a fender half this nice for twice the cost. Ordering another pair to have around the shop for the next project!
These are good looking fenders and will make my trailer look new. Thanks for fast delivery and good service.
James P - 03/10/2016Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.