Single Axle Trailer Fender - Rounded Edges - Cold Rolled Steel - 8" to 12" Wheels - Qty 1
(2466 reviews)
Price: $33.68
In Stock
Single Axle Trailer Fender - Rounded Edges - Cold Rolled Steel - 8" to 12" Wheels - Qty 1
Item # HP89VR
Our Price: $33.68
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (2466)
- Q & A (0)
- Photos
etrailer Trailer Fenders - HP89VR
- 10 Inch Wheels
- 11 Inch Wheels
- 12 Inch Wheels
- 8 Inch Wheels
- For Single-Axle Trailers
- Steel
- 28 Inch Long
- Bolt-On
- Weld-On
- 7 Inch Wide
- No Step
- etrailer
7" Wide x 28" long x 10" tall. This sturdy, rounded fender protects your trailer from road debris. 16-Gauge, cold-rolled steel with double-radius edges is durable. Bolt or weld onto your trailer.
Features:
- Rounded fender covers 1 tire on your single-axle trailer
- Blocks road debris from hitting other vehicles and helps protect your trailer's cargo
- 1" Wide inner and outer edges are rounded
- Sturdy, 16-gauge, cold-rolled steel construction
- Prime and paint the fender to get corrosion protection and to match your trailer's finish
- Weld-on or bolt-on installation
- Requires drilling and purchase of mounting brackets (sold separately) for bolt-on installation
- Made in the USA
Specs:
- Application: single-axle trailers with 8" to 12" diameter wheels
- Dimensions: 28" long x 7" wide x 10" tall
- Quantity: 1 fender
- Weight: 6 lbs
- 1-Year limited warranty
Tips for Replacing and Installing Trailer Fenders
- Do your best to match the dimensions of the new fender to your old one.
- If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
- As with all trailer maintenance, don't forget to chock your wheels before getting started.
- For a bolt-on fender, use your existing mounting hardware, if possible.
- The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
- If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
- Don't forget to prime and paint the new fender to keep it from rusting (and to match your trailer's finish).
- Before you start drilling, position the fender where you need it and center it over your wheel well.
- Mark where you need to drill (measure twice, drill once).
- Don't tighten down the mounting hardware completely until you're sure the fender is mounted correctly.
MFR00005 Single Axle Trailer Fender - Dual Radius - Cold Rolled Steel - 8" to 12" Wheels - Quantity 1
Replaces F7X28-1RBS
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Customer Reviews
Single Axle Trailer Fender - Rounded Edges - Cold Rolled Steel - 8" to 12" Wheels - Qty 1 - HP89VR
Average Customer Rating: 4.8 out of 5 stars (2464 Customer Reviews)
7" Wide x 28" long x 10" tall. This sturdy, rounded fender protects your trailer from road debris. 16-Gauge, cold-rolled steel with double-radius edges is durable. Bolt or weld onto your trailer.by: Gary10/04/2022
Very good fenders. Look very nice on trailer. Also changed hubs, pictures are after and before changes. Highly recommend getting the mounting brackets as well.
by: David 04/11/2024
Got my order it was right fast nice packaging very well satisfied
by: Mark 5105/02/2022
Just as described online catalog video.
by: H morgan05/09/2013
Putting them on a harley trike that i build for my wife. They fit great. I will get all my trailer fenders from etrailer. Thanks
by: Patrick05/07/2021
For a fender that was for a 8 to 12 inch wheel plus 28inchs long. Will make it work. Make it custom and they will get a custom to it . time to get to work
by: John C.07/13/2018
Fender is well formed without wrinkles or other flaws . I am putting this on a
custom motorcycle so I want it to look nice . I can paint it without having to
do any sanding or other metal prep work. Nice craftsmanship and a good price.
by: Tommy02/13/2013
A good solid trailer fender, easy to work with, and dimensions were exactly as described
by: John04/14/2022
Fenders are standing up to the use I have been putting the trailer thru! Everything working great.
by: Brad Gilley03/22/2012
The fender worked great for my purpose. I modified the product to make a custom rear fender on a motorcycle and it turned out excellent.
by: Doug 10/08/2022
Arrived fast and perfect fit. Very well made
by: W G W 08/28/2014
The fenders came in on the time specified and were as describd. Would order from them again.
by: Ted09/14/2017
Product shipped fast, arrived a day later than expected but not a big deal. Fender is exactly as described. No complaints.
by: Eric S.09/11/2012
This was a perfect match for my trailer and was shipped same day. I got much faster than I anticipated! Its easier than going to multiple stores to find the right part.
by: Kirb05/18/2017
Great fender for the money
by: Brad09/08/2017
Can't wait to install on my bobber. Great quality, fast shipping, great price.
by: Victor Romaine 10/22/2016
The product was good,but my fault I ordered wrong size
by: Attila06/30/2020
Good heavy fenders at a good price. No bodywork necessary. Install,prime, and paint.
by: Andrew05/18/2019
Excellent product. Fast shipping too.
by: Freddieleonard08/27/2019
Fast shipping great quality for price
by: Kenny 09/14/2022
by: Gerrad H.03/01/2012
Excellent product. Will fit my needs excellent. Fast shipping and great prices!
by: Travis 01/12/2022
Top notch service, thank you.
by: Marc 08/16/2021
by: Theodore 07/27/2021
by: Walter 08/12/2022
25
2457
Show More Reviews
See what our Experts say about this etrailer Trailer Fenders
- Are There Special Processes Required to Prime/Paint Single Axle Trailer Fender part # HP89VRAs long as the metal of the Single Axle Trailer Fender part # HP89VR is clean it would be totally ready for primer and paint. No special treatments or processes needed at all.
view full answer... - Radius of # HP89VR Trailer FenderThe trailer fender you mentioned, part # HP89VR is designed for use with 13 and 14 inch tires. The radius of the fender is 14 inches, or half the total length of 28 inches. Because the fender is not a complete half circle, this does not represent the actual dimension of the radius. Because two of these fenders placed together would not make a complete a circle geometrically speaking, the true radius would be unobtainable and would most likely be slightly less than 14 inches. I have...
view full answer...
- Availability of a Steel Trailer Fender with a 1 Inch Radius Lip on Front and BackWe do have one model that has the 1 inch lip radius on both sides. Take a look at 16-Gauge Steel, Single-Axle Trailer Fender, 1 inch Radius Front/Back, # HP89VR. There are some differences though. This fender is 7 inches wide, 28 inches long, 10 inches high, and fits 13 or 14 inch tires.
view full answer... - Replacement Fender Options for Choi Lee TrailerThe closest thing we have to an 18" long fender is the Single Axle Trailer Fender # HP39VR which is 19-1/2" long. The full dimensions are 19-1/2" long x 5-1/2" wide x 5-1/4" tall so it falls a little short on the width. If you're ok with a plastic fender you could also use the Fulton Single Axle Trailer Fender # F008550. This is 7" wide x 20-1/4" long x 6-1/4" tall. Without an exact match all you can do is try to get the dimensions as close as possible on new fenders.
view full answer... - Recommended Steel Fender for 12 Inch Wheel for Motorcycle SidecarI'd recommend going with the US made CE Smith # CE17720, the fender measures 22-1/2 inches in length, so it will closely match the profile of your tires. The fender is 7 inches in width, you could certainly split the fender along its width and weld in a 5 inch wide piece of 16 gauge steel to widen the fender to 12 inches. I've provided a photo showing the dimensions of the # CE17720 fender.
view full answer...
- Trailer Fenders Compatible with 12 Inch Wheels and Brackets 27 Inches ApartFor your retrofitted kayak trailer I recommend the Single Axle Trailer Fender - 16 Gauge Steel - 13" to 14" Wheels - Qty 1 # HP89VR which have a span of 28 inches. This fender is designed for larger tires and has a 28 inch overall span, so when mounting to your brackets it will fit on the inside of your brackets. If you want to go over the brackets then the Single Axle Trailer Fender - Jeep Style - Aluminum Tread Plate - 13" to 15" Wheels - Qty 1 # HP96VR may be more the route to go....
view full answer...
- Recommended Trailer Fender for 14 Inch Wheels and 28 Inches LongFor a trailer fender that is 28 inches long and designed for 14 inch wheels, I recommend the # HP69VR which is 7-3/4 inches wide or the # HP89VR which is 7 inches wide. The Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 2 # CE26098G-2 will allow you to mount these. Your other option is to use the etrailer Single Axle Trailer Fender w/ Backing # HP79VR which will allow you to mount it by the backing plate instead of using brackets. The Fulton Single...
view full answer... - What is the Radius of CE Smith Single Axle Trailer Fender CE17701GIf by radius you mean the length of a line segment from the center of a sphere to its perimeter then it is 11-3/4 inches given that the overall length of the fender # CE17701G is 23-1/2 inches. Because the fender is not a true half circle, this does not represent the actual dimension of the radius. Because two of these fenders placed together would not make a complete a circle, the actual radius would be unobtainable and would most likely be slightly less than 11-3/4 inches. Fulton...
view full answer...
Do you have a question about this Trailer Fender?
Info for this part was:
Expert Research:
Mike L
Edited by:
Lindsey S
Installed by:
Kathleen M
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mark 5.
5/3/2023
More than happy one year later with fender purchase and quality.