See what our Experts say about this CURT Custom Fit Vehicle Wiring

• Which Curt Trailer Wiring Harness Fits 2025 Kia Carnival
  Hey Jacob, sorry for any confusion but the correct trailer wiring kit you need for your 2025 Kia Carnival is the Curt part # CU94FR that you mentioned. The other part number was basically a preorder harness as we anticipated a new part number release but the older part number from 24 Carnival carried over to the 25s.
  view full answer...
• Trailer Hitch and Wiring Recommendation for 2025 Hyundai Tucson
  Hey Frank, for your 2025 Hyundai Tucson the hitch I would recommend is the Curt part # C94WR which is mostly hidden, has great towing capacities, and also is priced lower. For trailer wiring I would then recommend the part # CU94FR for a 4-way or the part # C68JR if you need a 7-way. What are you planning on towing?
  view full answer...
• Adding 7-Way Connector to 2020 Hyundai Palisade
  We definitely have what you need to equip your 2020 Hyundai Palisade with a 7-Way connector, however there isn't a single part number available for this vehicle to accomplish this. You will instead need to start by adding a 4-Way harness (if there's not one already present). For this the Curt T-Connector Vehicle Wiring Harness # CU94FR will work perfectly. This custom harness will plug right into an existing port behind the Palisade's rear bumper on the driver's side. I have attached...
  view full answer...
• Trailer Hitch Receiver and Wiring Installation Videos For a 2024 Hyundai Santa Fe Hybrid
  I have linked an installation video for the etrailer Trailer Hitch Receiver # e28AR which was installed on a 2021 Hyundai Santa Fe Hybrid near the bottom of the page. This is the newest hybrid we have been able to get into our shop to have a receiver installed. Also the installation instructions are linked near the video. I have also linked an installation video for the Curt 4-Way # CU94FR on the same 2021 Santa Fe Hybrid. You will want to verify your 2024 Santa Fe does have this connector...
  view full answer...
• Hitch And Wiring Availability For A 2025 Kia Sorento Hybrid SX-Prestige
  Hello Jim, thanks for reaching out. According to Kia, the tow package connections on a 2024 Sorento will be under the driver's side rear bumper cover. We have not been notified of any changes for the 2025 models, but it is too soon to say for sure since we haven't actually seen one yet. The plug should be easy to see once the panel is removed. If not plug is present this could mean two things. Either Kia decided to relocate the tow package plug on 2025 models, or your vehicle does not have...
  view full answer...
• Hitch and Trailer Wiring Harness for 2022 Hyundai Tucson
  We do offer a hitch for the 2022 Hyundai Tucson, part # C94WR which is sold separately from the # CU94FR trailer wiring harness.
  view full answer...
• Recommended Trailer Hitch Receiver, Wiring, and Brake Controller for 2022 Hyundai Santa Cruz
  It sounds like you would like to add a trailer brake controller to your 2022 Hyundai Santa Cruz to use along with the Curt Trailer Hitch Receiver # C23WR. The first thing you will want to add, in addition to the trailer hitch, is wiring. You are going to need a 4-way in order to power your trailer's signal lights. If you have the factory tow package and tow package you need the Curt T-Connector Vehicle Wiring Harness # CU94FR. This wiring harness will plug into the connection point in...
  view full answer...
• Draw-Tite vs. Curt Trailer Hitch For 2022 Kia Carnival
  There are only some minor differences between the two trailer hitch receivers for your 2022 Kia Carnival, which are the following part numbers: - Draw-Tite Max-Frame Trailer Hitch Receiver # DT34GR - Curt Trailer Hitch Receiver # C67ER One of those minor differences is the install, in which the Curt has you trim and reinstall the trim panel that is underneath your Carnival, while you'll leave it off completely for the Draw-Tite. However, you do not have to reinstall the panel with the...
  view full answer...
• Does Curt Hitch for 2024 Hyundai Santa Cruz Require Bumper Modification
  Hey William, the Curt hitch part # C23WR that fits your 2024 Hyundai Santa Cruz does not require modifying the bumper cover at all. For trailer wiring that is the plug in style that does not require splicing you would want the part # CU94FR.
  view full answer...
• Is there 4 Flat Trailer Wiring for My New 2025 Hyundai Tucson?
  Hello Maynard, Congrats on the new ride! Any awesome new features between the 2024 and 2025? I am glad you reached out. I am sorry to inform you that it will not work in your new 2025 Hyundai Tuscon. You are correct, there is not a plug-n-play wiring option for 2025 at this time. I am sure the aftermarket guys are working hard to get one one made because there have been a lot of questions about it. I wish I had some kind of time frame to give you, but we don't really know until it is...
  view full answer...
• 4-Way Mounting Bracket to Use with 2024 Hyundai Tucson with Curt Hitch and Wiring
  Hey Ed, I would go with the part # C42CR for a 4-way bracket to use with the # CU94FR and hitch # C94WR. You'll attach this to the lower bumper edge of your Tucson and it will give it a nice and secure place to mount the 4-way. What are you towing?
  view full answer...
• Parts Needed For Redarc Tow-Pro Brake Controller on 2024 Kia Carnival
  Hi John, We can most certainly get your 2024 Kia Carnival set up with the Redarc brake controller like you have in your Caravan, and you do have part of the equation already with the Curt 4-Pole Flat Trailer Connector # CU94FR. The only other things you'll need now are the 7-way and wiring, along with the brake controller itself, which you can get with the following: - Universal Installation Kit for Trailer Brake Controller # ETBC7 - Redarc Tow-Pro Elite Brake Controller # RED44FR You'll...
  view full answer...
• Parts Needed to Install Redarc Tow Pro Liberty in 2025 Kia Carnival
  Hey Toby, you'd need to start with a 4-way on your 2025 Kia Carnival so for that you'd need the part # CU94FR and then convert it to a 7-way with the part # ETBC7 which comes with everything needed to wire in a controller like the Redarc Tow Pro Liberty # RED52VR. What kind of trailer will you be towing? Do you have a hitch?
  view full answer...
• Recommended Brake Controller for a 2020 Kia Telluride
  For your 2020 Kia Telluride you need to start off with the T-Connector Wiring # CU94FR which plugs into a connector under your vehicle on the driver's side. Then for a brake controller I highly recommend using the Curt Echo # C51180 because you adjust the settings with your smart phone via Bluetooth and it can easily be stored in your glove box when not in use. Since this brake controller plugs into the 7-Way at the back of your Telluride you retain the OEM look on the inside of your...
  view full answer...
• Do You Have a Wiring Harness for a 2025 Hyundai Tucson
  As of (09/30/2024) we do not and none of our vendors have made a custom fit wiring harness for the 2025 Hyundai Tucson, yet. The only option available would be a universal harness like the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit item # 119250KIT. The item # 119250KIT harness uses sensors that clamp onto the factory wiring of your Tucson. These clamps transfer the signal for the harness to activate your trailer's lighting functions.
  view full answer...
• Recommended Trailer Hitch And Wiring For A 2024 Hyundai Santa Fe
  Hi Chris, Yes, you'll need the Curt Trailer Hitch Receiver # C37RV. This class III trailer hitch has a 4,000lb maximum towing capacity and 600lb tongue weight capacity, but you'll still want to refer to your Santa Fe's owner manual to verify its capacities. If you're planning on towing a trailer or adding lights to a hitch mounted accessory then I recommend also picking up the Curt T-Connector Vehicle Wiring Harness # CU94FR to transfer your light signals back.
  view full answer...
• Wiring Recommendations for 2020 Hyundai Palisade Limited
  For your 2020 Hyundai Palisade Limited edition you will need a wiring kit to transfer the light signals to your trailer, the pre-wiring provides a plug for the trailer wiring to hook up. I recommend Curt T-Connector Vehicle Wiring Harness # CU94FR. It provides a 4 way flat trailer connector and hooks directly into the tow package plug on the underside of your Palisade. It is a 1 piece, or 1 end connector, however there are adapters that will allow you to have both a 7 and 4 way like your...
  view full answer...
  
• Recommended Trailer Hitch for 2019 Hyundai Santa Fe Ultimate
  For your 2019 Hyundai Santa Fe Ultimate I recommend the Curt Class III Trailer Hitch # C13195 that offers the highest capacity for your vehicle and is assembled right here in the USA. Your Santa Fe Ultimate and the XL model do actually require different trailer hitch models because of how the rear frame/bumper differs between the two. I have attached an image a generous customer sent in of this very hitch on his 2019 Santa Fe Ultimate that you can check out to see exactly what it will...
  view full answer...
  
• Trailer Wiring Harness Fit For 2023 Hyundai Santa Fe Hybrid
  Hey Bob, we can get your 2023 Hyundai Santa Fe hybrid set up with a trailer wiring harness, and there are a couple options depending on if you need a 4-way or a 7-way. If you're using a brake controller you'll need the 7-way, otherwise if you just need the harness to activate the trailer's lighting and nothing else, you'll just need the 4-way. Here are your options: - 4-Way Connector: Curt T-Connector Vehicle Wiring Harness # CU94FR - 7-Way Connector: Curt T-Connector Vehicle Wiring Harness...
  view full answer...
• Which Stealth Hitch Option for Towing Small Boat With 2021 Hyundai Palisade
  The # 391CONVPT5L Stealth Hitch you'd looked at doesn't include the receiver that's designed for towing, it's meant for hitch mounted accessories only, but there are options that would allow you to tow your boat. To tow your boat, there's a couple ways you can go to upgrade to make that possible. You could use the part # 391CONVPT5L hitch, add the # 391BMU5L ball mount and a # 63845 2-inch trailer ball and the # CU94FR 4-pole trailer wiring harness, which would provide you everything you...
  view full answer...
  
• Recommended 7-Way Connector for a 2020 Kia Telluride
  Yes, it will so long as your 2020 Telluride already has a 4-way connector like item # C59236 or item # CU94FR. The 7-Way RV Upgrade Kit item # ETBC7L requires a functional 4-way to connect to your Telluride. Please note that the 7-Way RV Upgrade Kit item # ETBC7L will only work with wireless brake controllers like the Curt Echo item # C51180. If you are planning on using a traditional in-cab brake controller like item # 90195 you will need to use the Universal Installation Kit item #...
  view full answer...
• Correct Hitch And Wiring Harness For 2024 Hyundai Tucson
  Hello James. It sounds like you are on the right track here, because the etrailer Class 3 hitch # e38KR is indeed the correct hitch for the 2024 Hyundai Tucson. For the wiring, the # CU94FR you mentioned is correct for the 2024 Tucson, but this will only fit models equipped with the factory tow package. Basically, it will plug into a factory connector behind the passenger side rear access panel. If you do not have the factory tow package, use the OEM Replacement Harness # TK44ZR instead.
  view full answer...
• What Trailer Hitch do You Recommend for My 2022 Hyundai Santa Cruz?
  Yes, we do carry that hitch on our site! That is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C23WR. This Curt hitch is confirmed to fit your 2022 Hyundai Santa Cruz and comes with all hardware required for a bolt-on installation.
  view full answer...
• Can 2020 Hyundai Palisade Stealth Hitch Handle the Weight of a Pride Jazzy Wheelchair and Carrier
  Hey Don, thanks for reaching out! Sorry to hear about your situation though... The Stealth Hitches Hidden Rack Receiver # 391HYUNPALIS19 for your 2020 Hyundai Palisade has a tongue weight rating of 600 lbs so the hitch is plenty strong enough to handle the weight of both a wheelchair carrier and your Pride Jazzy wheelchair. According to my research your Palisade itself has a tongue weight of 500 lbs though so we need to make sure you remain under that rating since it's the lower of the...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?