Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Simple and rugged, this time-delay brake controller is able to install in any direction, even upside down. Includes a large digital display with a dark smoke lens that can be read even in direct sunlight. Activates brakes with a preset intensity.
Features:
Specs:
The Pro Series Pilot comes equipped with time-delayed braking. Every time you apply the brakes in your vehicle, a signal is sent - via the brake switch - to the Pilot. The controller then sends power out to your trailer brakes to activate them with an intensity set by you, at a rate determined by you. The amount of braking power (output) can be adjusted to suit your preference, the road conditions, the type of trailer, and the weight of your load. To determine which levels are best for your application, test your towing setup and choose what feels right.
Braking output is the maximum amount of power that will be applied to your trailer's brakes. How much braking output you need is determined by the weight of your trailer; a heavier trailer will need more power to bring it to a stop. You want to set the braking output as high as you can without locking up the brakes. Once you've set up the brake controller the first time, you shouldn't need to adjust the settings until the trailer load changes, you switch trailers, or road conditions change. Use the thumbwheel on the side to change the braking output level. The output setting will appear as a number on the digital display, with a higher number indicating higher braking power.
The Pro Series Pilot keeps the manual override within easy reach on the front of the module, great for stopping sway or controlling your trailer's momentum in emergencies. Push the slide-bar to activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
Because inertia plays no role in the functioning of this controller, you do not have to mount the unit at any particular angle. Your mounting options are limitless, so long as you can still easily access the controller and manual override. The Pilot is especially flexible; its microprocessor allows the controller to even be mounted upside down, and it will still give you a readable display. The Pilot can go wherever you need it. Plus, the included wiring adapter eases installation overall. The custom connector end plugs into the port on your vehicle and the other end plugs into the controller.
You can use etrailer's exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hola neighbors, it's Brad here at etrailer, and today, we're taking a look at the Tekonsha Trailer Wiring Harness Adapter for your Tekonsha brake controller on a Nissan or Infiniti SUV. So this is gonna work with your Armada and also your Q series SUVs, and it's gonna work pretty easily by simply just plugging into the factory tow package, and this other end is gonna allow you to plug into your Tekonsha or Draw-Tite style brake controller, making this a plug and play installation super easy. Now, if you have a Tekonsha brake controller like we have here, we have a Prodigy P2, they have a very similar connector to a bunch of the different Tekonsha brake controllers as well as the Draw-Tite. And this harness is gonna allow us to simply snap this into place here, and then this portion will plug in directly to our tow package, which is gonna be located under the dash. Now, to find your plug, it's gonna be pretty easy. Now, I have this portion of our panel dropped down, you don't need to do that, I'm just doing this to make it a little bit easier for you to find it.
And what you're gonna be looking for is kind of right at the steering column, you're gonna see that we have just the steering column here, but also, a white plastic box here. And you're gonna reach for a thick wire loom, and taped to it is going to be a white plug, and this white plug is gonna correspond with the other side of our harness here. So pretty simple, we'll just plug this in. And as soon as I plug that in, you can see that we have NC, which is not connected to our trailer, but we have power to our brake controller, so all that's really left to do is get this mounted up underneath our dash and we're ready to go. So this is super easy if you have that factory tow package to get your brake controller working properly.
Now, this is gonna be compatible with time delayed brake controllers, so that's gonna be your Draw-Tite Activators as well as the Tekonsha PowerTrac, and also, proportional brake controllers including the Prodigies as well as the Primus and the Voyager. So if you're looking to get your Tekonsha or Draw-Tite brake controller hooked up then start to tow with those trailer brakes, this is gonna be a super easy quick way to get that ready to go and you'll be towing in no time. So overall, this maybe takes about five minutes to get installed, and it's just, again, a plug and play, easy way to get it hooked up. And that was a look at the Tekonsha Brake Controller Wire Harness Adapter..
worked great!
Plug and play! Easy as it gets.
The right tool for the job
Very easy to install.
Snapped right into my wire in 1 minute.
Makes for a very easy install.
Works great and easy install.
Plugged right in and away I went.
Offers great products and fast shipping service!
Special Nissan electric pig tail plug right in.
Great Product- simple installation- everything as promised!
good value but the swivel mount being optional should be made more clear
ETrailer always has just what I need and great follow up service for any questions I have had. Thanks to your whole team!
I bought this as a package with my brake module. Didn't even remove the tywrap. plugged everything in and it works!
The product arrived in a timely manner. The item was as described.
It fit my 06 Nissan Titan like original equipment.
Much, much simpler to have a "plug & Play" than to do the wiring yourself. Excellent product and above excellent staff.
Product is basic... Service from eTrailer is EXCELLENT! Gold medal service from everyone.
Took about 15 minutes to install on my Nissan Armada. Highly recommended as it will make your life easier!
A must have when installing trailer brake controller.
lightning fast shipping and perfect parts. i will use this website for all my future trailer parts needs
Just what the electric brake control said it was and the special Nissan electric pig tail plug right in.
Plugs right in to stock plug under dash of Titan. Then just plug into Prodigy Tekonsha controler and your done.
Shopping at etrailer couldn't have been easier or any better. The website was easy to navigate (found my part easily). The part must have shipped that same afternoon as quickly as I got it. I'll certainly be back for any and all my trailer/towing needs.
simple plug and play install on my qx56. good quality connectors with wire wrapped up nice and neat.
Excellent I can do this my self and save 150 the some one want it to charge me to hot wire my hold sistem
Do you have a question about this Trailer Brake Controller?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.