bing tracking image
  1. Trailer Leaf Springs
  2. etrailer
  3. 25-1/4 Inch Long
  4. Double Eye Springs
  5. 4000 lbs
  6. 3 Leaf
3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
etrailer

3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long

Part Number: e57SR
In Stock
$43.79
Trailer Leaf Springs
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 4,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter. Great Prices for the best trailer leaf springs from etrailer. 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long part number e57SR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2403)
  • Q & A (0)
  • Photos

etrailer Trailer Leaf Springs - e57SR

Highlights

  • 2,000-lb Spring Capacity (4,000-lb axle): Handles typical tandem trailer loads with margin.
  • 25-1/4" Eye-to-Eye Length: Matches common hanger spacing for consistent ride height.
  • 1-3/4" Wide, 3-Leaf Stack: Flexes to absorb bumps and reduce jarring on rough roads.
  • 9/16" Nylon Bushings Installed: Provides a snug, quiet fit on standard wet bolts.
  • Sturdy Steel Construction: Resists fatigue and maintains arch under repeated loads.
  • Replace in Pairs: Keeps axle alignment true and suspension travel balanced.

Features to know about

Bring Back a Smooth, Level Ride: 3-Leaf Spring Handles 4,000-lb Axles

Tired of the bounce and uneven tracking that come with worn suspension parts? This 3-Leaf Double-Eye Spring restores stability with a spring capacity of 2,000 lbs and an axle capacity of 4,000 lbs. At 25-1/4" from center eye to center eye and 1-3/4" wide, it flexes just enough to absorb road shock and keep your trailer level on rough or uneven surfaces.

Built to Take the Load: Strong Steel Construction with 3/8" Thick Leaves

The 3-leaf pack is made from sturdy steel that resists fatigue under heavy use. Each 3/8" thick leaf shares the load evenly, reducing stress that leads to sagging or early wear. Whether you’re on long highway runs or rolling over rough gravel, the steel construction holds steady and keeps your setup tracking straight.

Quiet and Low-Maintenance: Includes 9/16" Nylon Bushings

The spring comes with pre-installed nylon bushings sized at 9/16" inner diameter, cutting down on friction between the bolt and spring eye. The result is smoother movement and fewer squeaks, so the suspension works quietly mile after mile.

Reliable Fit for DIY Repairs: Easy to Mount with Standard Hardware

Replacing your old leaf springs at home is straightforward. Each end of the spring mounts to a hanger on the trailer frame and shackle straps or an equalizer (sold separately). The 25-1/4" unloaded length makes alignment easy with standard 29-1/2" hanger spacing setups, so you can get back on the road quickly.

Keep Suspension Balanced: Always Replace Springs in Pairs

For proper axle alignment and ride quality, leaf springs should always be replaced in pairs. Matching new springs ensures even height and consistent suspension performance, preventing one side from carrying more load than the other.

Specs

Quantity and Capacity

  • Quantity: 1 leaf spring
  • Spring capacity: 2,000 lbs
  • Axle capacity: 4,000 lbs

Dimensions

  • Length from center of spring eye to center of spring eye (unloaded): 25-1/4"
  • Spring width: 1-3/4"
  • Eye diameter with bushing: 9/16"
  • Eye diameter without bushing: 11/16"
  • Leaf thickness: 3/8"
  • Number of leaves: 3

Additional Dimensions

See table below:

Part NumberABCD
e57SR12-5/8"13-1/4"25-1/4"3"

Technical diagram of 3-leaf double-eye trailer spring showing labeled measurements A through D with lengths 12-5/8, 13-1/4, 25-1/4, and 3 inches, for 4,000-lb trailer axle fitment.

  • A: 12-5/8"
  • B: 13-1/4"
  • C: 25-1/4"
  • D: 3"

Note

  • Important installation note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.

e57SR etrailer Double Eye Trailer Leaf Spring - 3 Leaf - 2,000-lb Capacity

Compares to SP-220275





Customer Satisfaction Score:

Ratings & Reviews

4.7

2403 reviews
5 Stars
(2019)
4 Stars
(223)
3 Stars
(60)
2 Stars
(34)
1 Star
(67)
Review sort icon
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 4,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

by:

Upon installation they looked good. After 2000 mile trip they are no better than the springs I took off of my 27bhb. I do not recommend them at all they are almost flat already. No idea what to put on the trailer next.



by:

Perfect fit!



by:

Love it



by:

Although rated for a 4000 lbs axle, they will be going on a 3500 lbs axle. When going on uneven ground (like washouts), one axle will end up taking the full load on a tandem axle which causes overloading on a set of 3500lbs springs. With the extra capacity, this will help with these situations.



by:

The springs were a perfect match up. Easy installation with the exception of my existing rusted bolts Prompt service, exact replacements would not hesitate to use etrailer for any parts for my three trailers



by:

Fit was perfect



by:

Did not receive entire order.Arrived late due to backorder of another part. Parts received with no issues.



by:

While working on my trailer I determined the leaf springs needed to be replaced. Normally etrailer is my go to source for all things trailer, but in this case, being in the middle of the job and wanting to get the new springs as quickly as possible, I found some on Amazon that would be delivered the next morning. By the description they would be a perfect match. Unfortunately when they arrived it turned out the eye holes were a bit too big for the bronze bushings I use. I started thinking maybe I had the wrong bushings, but was unable to find any with a slightly larger OD and the same ID. At this point I knew it was time to call the experts. Ten minutes on the phone with etrailer and it was all figured out and the correct springs were on their way to me that same day. When they arrived they were, of course, a perfect fit. Should have saved myself the trouble and gone straight to the people who really know the products they sell. Lesson learned!



by:

Partial order should have been shipped earlier waited 30 days



by:

Perfect part for my trailer



by:

Excellent springs. Replaced worn springs and shackles. E-Trailer supplied every thing. I went from 3500 lb. springs to 4000 lb. springs. The replacement was easy and the trailer tows straight and I don't even know it's back there. Huge improvement.



by:

Fast shipping and correct description of items. 2nd time I’ve orders from here and everything went perfectly.



by:

Product was exactly as described. Easy to install and fit perfectly.



by:

springs are working fine. the orginal mastercraft springs were 1 inch long and with your tech support we chose the proper lenght and they now fit better.. thanks, paul



by:

I replaced my 4 year old 3000lb leaf springs with these 4000lb springs and they are running great! Old springs were completely flat, happy I upgraded to heavier springs



by:

Springs look much better quality than the original ones
I will be putting them on today



by:

I got what I ordered and it was delivered in a very timely manner. Overall a great experience.



by:

Shipping is good, no damage at all, don't understand why others have a problem, 4,000 lb leaf springs are exactly what I needed for a little higher capacity, original 3,500 lb
Thank you Kimberly and to ALL YOUR WONDERFUL STAFF, for their wonderful job's packing, warehouse personnel, ABSOLUTELY EVERYONE IS FANTASTIC



by:

Extremely fast delivery, Thank! Packaged very well. Have not install yet but have used etrailer in the past and worked out great!



by:

Replaced 1750 lbs springs work good but thinking I should have gotten 5000 lb 2000 lb are working ok



by:

I used these to replace the 3500lb springs on our 7k converted cargo camper. The trailer weighs 6000lbs ready to travel but the springs were lacking lots to trailer bounce and roll. Sumo Springs were not an option because of clearances. These stiffer springs combined with cushioned equalizers made a huge difference in how the trailer tows. Much more controlled now.

Brooke M. profile picture
Etrailer Expert

Brooke M.

7/10/2025

That's awesome, Brian. Glad there was a solution even it took a little more thought. Are you the one that did the conversion or did you get the camper already redone? I've seen a few pictures out there - it's like the trailer version of a barndominium!



by:

The install was relatively straight forward, but it was a lot of work. Took longer than expected, but I cleaned up and painted a few parts in the process. The hardest part was jacking up the trailer and removing the old bolts from the hangers. I was a little hesitant to go from a 4 leaf spring to a 3 leaf spring, but etrailer was a great help in figuring it out. After thinking about it, I think the 3 leaf spring may actually be better because the individual springs are thicker, hence less likely to break.

Mike L. profile picture
Etrailer Expert

Mike L.

8/19/2022

It DOES seem counter-intuitive, but the number of leaves in a leaf spring doesnt have any bearing on its weight rating. As long as youre using the properly rated replacement spring, youll be good to go!



by:

Perfect fit and price. Great customer service. Ready for the lake!



by:

Replaced the 1750 pound springs on my 3500 pound axles with these 2000 pound springs. Perfect fit and shipping was fast. Highly recommend.



by:

All parts fit perfectly. Now I feel comfortable and safe going down the highway with my new suspension thanks E trailer.


25
25

See what our Experts say about this etrailer Trailer Leaf Springs

  • How to Determine Correct Leaf Springs For 2018 Jayco Travel Trailer
    Hi Austin, I can help you determine the right replacement double-eye leaf springs for your 2018 Jayco trailer, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure your current leaf springs from center-to-center of the spring eyes, and you also need to know the weight rating of your axle. Based on its weight, your 174BH is likely to have a 3,500 lb axle, though you'll want to double check just to be sure. Leaf springs...
    view full answer...
  • Limited Tire Clearance with Stock Tire Size on a 2006 Forest River Cherokee 27Q
    We recommend having a minimum of 3" between the top of the tire and bottom of the fender in order to allow for proper suspension travel. However, based on the photo you sent I believe you need new leaf springs as the ones you have appear to be almost completely flat. This has then compromised your tire clearance. The flattened leaf springs could either be a result of overloading the trailer or just general wear. In order to replace them you would need to know your axle capacity and the...
    view full answer...
    Image 1 for
  • Upgrading Leaf Springs, Equalizers, and Wet Bolt Kit for 2018 Jayco 265RLS
    Hey Jeff! I can help you find the right parts to upgrade everything but you're going to need to take some measurements. For the leaf springs, you will need to get the spring eye to spring eye measurement or the flat length as outlined in the article I attached further down on this page. You don't want to go too crazy with a higher capacity or you're going to get a rough ride. 4,000 lb leaf springs like the 25-1/4" Long # e57SR or the 26" Long # e22YR would be a good choice if they match...
    view full answer...
  • 2,000 lb Rated Leaf Spring Replacement For A Dexter 072-042-00
    Hello Mark. Based on what I could find online, the Dexter 072-042-00 is a standard 1-3/4 inch wide double eye spring which is 25-1/4 inches long and rated for 1,750 lbs. To replace these, I recommend you use the 3-Leaf Double-Eye Spring # e57SR. This is a 2,000 lb rated 1-3/4" wide double eye spring that measures 25-1/4" long overall. So this will be a direct bolt-on replacement for your Dexter springs and it has the 2,000 lb rating you are looking for.
    view full answer...
  • Can I Use 4,000 lbs Springs to Replace 3,500 lbs Leaf Springs?
    Hey Jason, welcome back! The 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles item # e57SR is the same length so it would definitely work. Bumping up an extra 500 lbs per spring is definitely going to help with the longevity of your suspension. That increase in capacity along with you dropping down a leaf won't make your suspension stiff. The Dexter item # DX35CR would be a better replacement option though. Dexter's leaf springs are a higher quality and will last longer. Please note...
    view full answer...
  • Replacement Leaf Springs and MORryde X-Factor Crossmember for 2021 Grand Design Imagine 2400BH
    Hey Mark! Assuming they are 25-1/4" leaf springs I recommend the 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles # e57SR. These are our in house brand and will save you some money. If you would prefer to stick with Dexter we also have the # DX35CR. For U-bolts you can use the U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts # APUBR-1. The MORryde X-Factor Crossmember for Standard Frame Hangers # MR33WR is the correct crossmember. However, I can't say for...
    view full answer...
  • Choosing the Correct Replacement Leaf Springs for a Weekend Warrior Toy Hauler
    In order to choose the correct replacement leaf springs for a trailer you'll need to know both the unloaded length and axle capacity. The number of springs is not relevant so long as you choose a set that matches the axle capacity as springs can have different thicknesses therefore different weight capacities not necessarily dependent on the number of leaves. A few other things to keep in mind is that leaf springs can lengthen over time and you need to replace them in pairs. I have attached...
    view full answer...
  • Can I Use A 4,000 lb Leaf Spring For A 3,500 lb Axle?
    Hello Alfredo, thanks for reaching out. You are on the right track with the 25-1/4" long 4,000 lb leaf spring part # e57SR. That sounds like exactly what you need size and capacity-wise. I wouldn't worry about any excessive bounce with those. If anything, it would bounce less since the spring will be a bit stiffer than what you had before. It's not enough of a jump to make the ride too stiff though, especially if you are loading the trailer up with gear. I think its a good choice. For...
    view full answer...
  • Determining Correct Length Replacement Leaf Spring
    Trailer leaf springs can grow longer after many years of use. A new springs that measures 25-1/4-inches long like # e57SR could easily measure 25-1/2-inches after years in service on a trailer. Springs can lengthen as much as 3/4 of an inch. If your old spring measured 25-1/2 you can safely conclude that it is actually a 25-1/4-inch. Our main leaf spring page is linked for you. Just click on your dimension and axle weight rating to see suitable options. Generally you want no less than...
    view full answer...
  • Cushioned Equalizer Upgrade Recommendation for 2012 Forest River Work and Play
    Mark, the Dexter EZ Flex part # K71-652-00 can be used to replace your # TREQ310 and is cushioned like you are wanting. The 25-1/4 inch leaf spring size is very common but you didn't mention what axle capacity you have so if you needed a 5k spring you'd part # e44sr, 4k axle part # e57SR, or 6k axle part # e34SR. Keep in mind going with a little higher of a capacity than needed is perfectly fine.
    view full answer...
  • Can E57SR Leaf Spring Be Used On 2019 Grand Design Imagine 2400BH And Go From 4 Leaf To 3 Leaf?
    Hey Chance! Good question; we get this one a lot. The number of leaves is not the best way to choose a replacement spring. A 3-leaf spring can replace a 4-leaf spring as long as the spring length, style, and weight rating are correct for your trailer. What matters most is the eye-to-eye length and the axle capacity. The 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long # e57SR could work for your 2019 Grand Design Imagine 2400BH as long as your current springs measure...
    view full answer...
  • Looking for Replacement Leaf Spring, U-Bolt Kit and Equalizer for Magic Tilt
    Hey Danny, for the leaf spring the part number replacement you would need would be the part # e57SR. The u-bolt kit you'd need is the part # CE23103. Then for the equalizer replacement you'd need the part # TREQ356.
    view full answer...
  • Replacement Leaf Springs for 2019 Riverside Retro 265RB
    Hi Jeff; there are a lot of different leaf spring lengths out there, and axle spacing/hanger measurements can only help you guess what the original length was. The "D" measurement isn't really the best way to find a replacement either. If you're measuring spring eye to spring eye (C) and getting 25-1/4" then the original leaf springs were likely shorter since they flatten out over time. If you're measuring "C" and it is close to 26" then 25-1/4" wouldn't be out of the question. Can...
    view full answer...
  • Are 5,200 lb Leaf Springs Rated Too High To Replace 3,500 lb Leaf Springs
    Hey Alex! I would say that 5,200 lb leaf springs like the # DX45CR are a bit too much. Moving to these over the 3,500 lb is quite a jump, and you'll probably have a really stiff ride you don't want. Assuming you're looking for 25-1/4" leaf springs I would get the # e57SR instead. The 4,000 lb rating will give you stronger leaf springs without going overboard. If you prefer the Dexter version it would be # DX35CR. If you have any other questions feel free to reply below.
    view full answer...
  • What Rating Should be Used to Pick Out Trailer Leaf Springs
    Hey Howard, you would want to go with leaf springs that match the axle rating of your trailer as that's how the springs are typically rated. So for example, the leaf spring part # e57SR would be the correct rating as it was designed for 4,000 lb axles and also has a very standard length of 25-1/4 inches.
    view full answer...
  • Hello Sir I have a 2004 Continental A2150-5000 wi
    Hey Keith thanks for all the information! The best suspension kit for your 2004 Continental A2150-5000 trailer is going to be the Dexter E-Z Flex Suspension Kit item # K71-653-00. This kit has upgraded equalizers with rubber cores that absorb road shock, which give you a smoother ride. The shackle straps are slightly shorter at 3/8" which will not affect your suspension. They have wet bolts with built-in grease zerks that makes maintenance extremely easy. I have linked an installation...
    view full answer...
  • Can A 25-1/4" Leaf Spring Be Replaced With A 26" Leaf Spring?
    Hello Mark, thanks for reaching out. When replacing leaf springs, it is important the new springs are identical in length to the old ones. There is a small amount of tolerance, like 1/2" or less, but any more than this can throw the suspension off center like you are describing. It sounds like the 2" springs are just too long for your trailer and will need to be replaced. I see that you ordered the # e22YR springs which are for a 4,000 lb axle. We do offer a 25-1/4" spring for a 4,000...
    view full answer...
  • Correct Leaf Spring for Trailer with Lippert 3,500 lb Axle
    Thank you for the photo! I was able to use the serial number on your axle to determine which is the correct replacement leaf spring for your trailer. For this, you are going to want to use the 3-Leaf Double-Eye Spring # e57SR. The measurement you provided of 26" long is correct but the leaf spring needs to be measured while unloaded as it will lengthen while a load is present. If you were to take the leaf spring off of the trailer it would measure 25-1/4" unless badly worn. I don't recommend...
    view full answer...
    Image 1 for
  • Replacement Leaf Springs for 2017 Grand Design Imagine 2600RB
    Thank you for providing that information. Leaf springs like the ones you have now typically match the axle capacity on your trailer. Although adding leaf springs with a slightly higher capacity won't hurt, it also is not necessary. Based on the leaf springs and and other information I'm sure you have 3,500 lb axles. Your standard diameter for this capacity would be 2-3/8". In addition to the capacity you want the eye to eye length to match, so we are looking at 25-1/4" long leaf springs. I...
    view full answer...
  • Determining The Correct Replacement Leaf Springs For A 2021 Keystone Passport Grand Touring TT
    You could potentially replace your leaf springs with a larger capacity spring but will need to match the length of your current leaf springs to avoid having to remove and reinstall the hangers and rest of the suspension system, which is a giant hassle and a lot more costly than just replacing the springs. If you have double-eye leaf springs you'll need to measure from the center of one eyelet to the center of the other. If you have slipper springs then you'll need to measure from the...
    view full answer...
    Image 1 for Image 2 for
  • Converting Shorelandr Boat Trailer from Slipper Spring to Double Eye
    The best solution is going to be to go with a double eye leaf spring setup instead of what you have now. For that the leaf spring part # e57SR is for a 4,000 lb axle and has a 25-1/4 inch length from eye to eye. Then for a hanger kit you'd want the part # APS4 and you'd be set. There isn't a slipper spring setup that matches what you are looking for.
    view full answer...
  • Would Upgrading From 3,500lb Leaf Springs To 4,000lb Springs Hurt Ride Quality
    Hey Gary, Switching from 3,500lb to 4,000lb springs would be totally within reason and wouldn't be so over the top that it would drastically alter your ride quality. We offer 4,000k leaf springs with a 25-1/4" length with part # e57SR, but it is a 3-leaf spring so it won't have as soft of a progression.
    view full answer...
  • Replacement 3,500 lbs Leaf Springs w/ a 25-3/4" Center Eye to Center Eye Measurement
    Yes, the 25-1/4" Long 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles item # e57SR, will indeed work to replace your older springs. You're going to be an inch shorter on your suspension travel using two of these so it will make your ride a little stiffer. We can easily address this by using longer shackle straps. When you replace your leaf springs you also have to replace the hardware because it's only meant to be torqued down once. If you could tell me how long your shackle straps...
    view full answer...
  • Recommended 26 Inch Leaf Springs for 3750 lb Tandem Axle Boat Trailer
    The 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long # e27SR will be the closest fit for your 3750 lb axle. Having leaf springs rated slightly higher is normal because you will be limited in capacity by the weakest component on your trailer and normally you want that to be your axle. These springs will not be too strong for that axle as to cause too firm a ride.
    view full answer...
    Image 1 for Image 2 for


< Previous
123. . .9




Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Manda E
Updated by:
Manda E
Employee Mike S
Written by:
Mike S
Employee Andy C
Installed by:
Andy C
Employee Kevin C
Installed by:
Kevin C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


Product Experts Available Now!
Call 1-800-940-8924