2,000 lb Rated Leaf Spring Replacement For A Dexter 072-042-00

Updated 11/10/2025 | Published 04/11/2024

Products Featured in This Question

4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long

(2331)

$72.58

3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long

(2331)

$42.81

Question:

Im replacing springs on my utility trailer,it has a set of 1750 Dexter 072-042-00. Im looking for a set of 2000.,to bolt direct on. Thanks

asked by: Mark A

Expert Reply:

Hello Mark. Based on what I could find online, the Dexter 072-042-00 is a standard 1-3/4 inch wide double eye spring which is 25-1/4 inches long and rated for 1,750 lbs.

To replace these, I recommend you use the 3-Leaf Double-Eye Spring # e57SR. This is a 2,000 lb rated 1-3/4" wide double eye spring that measures 25-1/4" long overall. So this will be a direct bolt-on replacement for your Dexter springs and it has the 2,000 lb rating you are looking for.

expert reply by: Jesse M

Daniel

11/8/2025

Hi I am interested in doing the same thing My question is going from the four leaf spring to the three leaf spring would any height/ wheel clearance be lost? I currently have 072 042 00 1750 capacity springs that are ready for replacement. Would a 4 leaf 2200lb capacity be to stiff? I am debating between the 2,000 lb capacity 3 leaf and the 2200 lb capacity 4 leaf Looking for the best recommendation

Jesse M.

11/10/2025

@Daniel So technically yes you would loose the height of the one leaf which is 3/8" but then on the other hand a slightly stiffer spring wouldn't flex as much so you honestly might not see any noticeable height difference. A 2,000 lb spring would make sense here if you want to do a light upgrade. What is the eye-to-eye length of the current springs when not under a load?

Daniel

11/10/2025

@JesseM After doing some research I ordered e57SR. My springs are 25 1/4 unloaded and 26 loaded. I'm sure the metal on the three leaf springs must be a bit thicker so the height difference may not apply. I believe the e57SR and the pr4b would have the same Arch height. Original springs where pr4b. Thank you for the reply

Jesse M.

11/10/2025

@Daniel Ok perfect good choice with the # e57SR spring then. It will fit nicely and will be a bit of an upgrade without making the ride too rough hopefully. Let me know how they work out, or feel free to come back anytime you need anything else!