Cushioned Equalizer Upgrade Recommendation for 2012 Forest River Work and Play
Updated 08/11/2024 | Published 08/07/2024
Products Featured in This Question
Question:
Hello, I was wondering if I could get the part number for an equalizer upgrade for suspension on a Forest River work and play 2012. The equalizer is the same dimensions as TREQ310. It has a 33 1/2 inch wheel base . If you can Identify which springs I might need also I would appreciate it. Spring eye to eye looks like 25 1/4. Thank you.
asked by: Mark
Expert Reply:
Mark, the Dexter EZ Flex part # K71-652-00 can be used to replace your # TREQ310 and is cushioned like you are wanting.
The 25-1/4 inch leaf spring size is very common but you didn't mention what axle capacity you have so if you needed a 5k spring you'd part # e44sr, 4k axle part # e57SR, or 6k axle part # e34SR. Keep in mind going with a little higher of a capacity than needed is perfectly fine.
Product Page this Question was Asked From
Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 6-1/16 Inch Long
- Tandem Axle
- Triple Axle
- TruRyde
more information >
Continue Researching
- Search Results: trailer suspension parts
- Search Results: dexter heavy duty suspension kit
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Video: Review of Dexter Trailer Suspension Parts - Standard Equalizer - DX64VC
- Search Results: trailer leaf springs
- Search Results: 5th wheel trailer to gooseneck hitch 5th wheel gooseneck adapter
- Search Results: gooseneck hitch
- Search Results: double eye springs trailer leaf springs
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Q&A: Does the 9-16" U-Bolt Kit Require Lock Washers?
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Video: All About the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
- Video: Let’s Check Out the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles
- Video: Review of MORryde 5th Wheel Gooseneck Adapter - GooseTech 5th Wheel To Gooseneck Pin Box - MR57MV
- Shop: 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long
- Q&A: 2 inch Lift Kit for Tandem Axle Fifth Wheel Trailer
- Q&A: Upgraded Leaf Spring to Replace a 25-1/4" Long Dexter 072-078-00
- Video: Review of RV Ride Control Trailer Suspension Parts - Alignment and Lift Kits - RR23QX
- Video: What to Know About the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
- Q&A: Can Leaf Springs be Placed in Overslung Configuration for a 2022 Grand Design Reflection 31MB
- Video: Comprehensive Review: Dexter E-Z Flex Suspension Kit
- Search Results: morryde
- Q&A: Replacement Leaf Springs for Pair of 6,000 lb Axles
- Q&A: How To Find Out Which Replacement Leaf Spring Fits 2016 Forest River X-Lite 272
- Q&A: Can Different Brand Trailer Bearings Be Used As Replacements
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Suspension Enhancement
on Trailer Suspension Parts
Mark
8/9/2024
Thanks for your help. I did notice that the dimensions on the equalizer are different than the original. Would this would change the ride height? Could I use something like the MORryde CRE2-33? Or am I way off on this? Thanks again.