Replacement Leaf Springs for 2017 Grand Design Imagine 2600RB
Published 07/30/2022
Products Featured in This Question
Question:
Thanks for the info. I will also need to replace the U-Bolts. My measurements show 7" length x 3 & 1/8" inside to inside width. The diameter appears to be between 1/2" and 9/16". I'm not sure which. Could I go with 9/16" even if it's slightly larger than original? Need part number please.
asked by: Clark T
Expert Reply:
Thank you for providing that information. Leaf springs like the ones you have now typically match the axle capacity on your trailer. Although adding leaf springs with a slightly higher capacity won't hurt, it also is not necessary. Based on the leaf springs and and other information I'm sure you have 3,500 lb axles. Your standard diameter for this capacity would be 2-3/8". In addition to the capacity you want the eye to eye length to match, so we are looking at 25-1/4" long leaf springs.
I have two different options I recommend as a replacement. The first is the # e57SR. These match your current length and are rated for a 4k axle. This would ensure you aren't going over capacity too much and maintain a smooth ride. If you would prefer more then the next best thing is the # e44SR. This leaf spring is designed for 5k axles so you may start to notice an impact on your ride quality. Nobody makes 4,400 lb axles anymore so there isn't a good in between option.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 5000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Lippert Road Armor Shock-Absorbing Equalizer Kit - Tandem Axle - 3,500-8,000 lbs
- Search Results: trailer leaf springs
- Search Results: road armor
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Search Results: trailer suspension parts
- Q&A: Are Lippert Road Armor Cushioned Equalizers Still Available
- Search Results: trailer brakes
- Search Results: lippert road armor
- Search Results: break drum
- Video: Review of Lippert Trailer Suspension Parts - Equalizer Upgrade Kit - LC53CK
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Q&A: What Equalizer Upgrade Would Be Best for My 2026 Jayco Eagle 28BHU?
- Q&A: What Size Wet Bolts Come with MORryde Suspension Upgrade Kit # MR46ZR
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Search Results: roadmaster comfort ride
- Shop: Lippert Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K Lippert Axles
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Q&A: Can Curt Multi Fit Hitch 13704 Install on Trailer with Boxed Frame 2025 NOBO 19.3
- Q&A: Does the 9-16" U-Bolt Kit Require Lock Washers?
- Video: Roadmaster Comfort Ride Leaf Spring Suspension Installation - 2022 East to West Alta Travel Trailer
- Video: Detailed Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Video: Let’s Check Out the 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles
- Video: A Closer Look at the Thomas Payne Trifold RV Loveseat - Warba Graphite
- Q&A: Replacement Suspension Parts for a 2016 Grand Design Imagine 2600RB
- Q&A: Can 26" Double-Eye Leaf springs Replace 25-1/2" Double-Eye Leaf Springs
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: Double-Eye Trailer Suspension System Review
- Video: Detailed Breakdown of the MORryde Rubber Equalizers for Tandem Axle Trailers
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
on Trailer Leaf Springs
Clark T.
7/30/2022
Thanks for the info. I will also need to replace the U-Bolts. My measurements show 7" length x 3 & 1/8" inside to inside width. The diameter appears to be between 1/2" and 9/16". I'm not sure which. Could I go with 9/16" even if it's slightly larger than original? Need part number please.