Replacement Leaf Springs and MORryde X-Factor Crossmember for 2021 Grand Design Imagine 2400BH

Updated 03/10/2026 | Published 03/05/2026

Products Featured in This Question

3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long

(2240)

$41.34

U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts

(2130)

$77.34

3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long

(310)

$96.97

MORryde X-Factor Crossmember for Standard Frame Hangers

(347)

$156.59

MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications

(37)

$73.53

Question:

I have a a 2021 Grand Design Imagine 2400BH. I am looking into replacing my leaf springs on my 3500 lb axles and adding the morryde X factor braces. OEM Springs are 1750. I want to upgrade to 2000. What springs and u bolts do you recommend? Will I need the relocation brackets for any of the X factor braces? I have not confirmed yet but I do believe my springs are 25 1/4” long. I also already have the Lippert road armor equalizer and wet bolt kit with thicker shackles.

asked by: Mark M

Expert Reply:

Hey Mark! Assuming they are 25-1/4" leaf springs I recommend the 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles # e57SR. These are our in house brand and will save you some money. If you would prefer to stick with Dexter we also have the # DX35CR. For U-bolts you can use the U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts # APUBR-1.

The MORryde X-Factor Crossmember for Standard Frame Hangers # MR33WR is the correct crossmember. However, I can't say for sure if you will need the adapter kit # MR43WR. You will have to take a look under your trailer to see if anything is in the way between the hangers. Most applications don't require the drop down brackets but it is always best to check.

Any big trips coming up with your Imagine?

expert reply by: Robin H

X-Factor Crossmember
(click to enlarge)

Ronald

3/10/2026

I used the 4000lb 3 leaf springs for a grey wolf 26dbh along with the wet bolt kit and it worked perfectly for my application. Hope this helps.

Dennis B.

3/10/2026

I have a 2022 Gulfstream Ameri Lite 199DD travel trailer with a #3500 axle. The trailer weighs #1760 wet on the right side because all of the appliances are on that side from the factory. The trailer had a noticeable sag on that side even though the #3500 springs had already been replaced once. I installed 3 leaf #4000 springs a year ago and now the trailer sits level and rides fine. I'm very satisfied with their performance.