Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to take a quick look at Dexter Axles, Trailer Hub and Drum Assembly, part number 8-276-51. This hub and drum assembly has a capacity of 2200 pounds and it uses a 4 on 4 bolt pattern. There are four studs and if we're able to accurately measure from the center of one stud directly across to the center of the other stud, we get about 4 inches. Inside the hub bore, you'll find that the races are already pressed in. You will need to use a grease seal sold separately, part number 10-9 and two bearings also sold separately, part number L44649 and that will be your inner and outer bearing, and you also need to source the grease cap. Now, we'll take a look at the measurement inside.
We have an inner diameter of 7 inches. Our depth comes in at a little under 2 inches, which means this drum should be used with 7-inch by 1-3/4-inch brake assemblies. And that's it for our quick look at Dexter Axles, Trailer Hub and Drum Assembly, part number 8-276-5.
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Nathan B.
11/18/2020
Everything worked great and still does. Thanks to the help from the etrailer Team