Adding Electric Brakes to 1999 Jayco Pop-Up Camper Trailer
Published 06/05/2015 >
Products Featured in This Question
Question:
I bought a 1990 Jayco 1406 popup camper. The guy I bought it from told me it had electric brakes. On my first shake down trip, I realized all the braking action was on my car. Can a 1990 Jayco have electric brakes? It has other electric problems, so I will be working on anyhow.
asked by: Dennis H
Helpful Expert Reply:
Jayco offered its 1999 Pop-Up camper trailer with and without brakes. Typically pop-up campers are equipped with electric drum brakes.
It is likely that the brakes are bad or there is a wiring issue on your 25 year old trailer. Hopefully you have a brake controller. If there was a wiring issue or if there were no brakes on the trailer at all, then the brake controller should have indicated so.
First you want to determine if you have brakes or not (hub and drum vs. idler hubs). An idler is a hub that is no provisions for trailer brakes. It has no brake drum. See part # 8-248-50UC1. Part # 8-276-5 is an example of a hub/ drum that has a brake drum that can be used with a brake assembly like part # 23-47.
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 7" - Right Hand - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Continue Researching
- Q&A: What is the Replacement Wheel Hub Needed on the Axle of a 1996 Jayco 1207 Popup Trailer
- Video: Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes Spec Review
- Shop: Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes - 2,000-lb E-Z Lube Axles - 5 on 4-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4
- Shop: LubriMatic Deluxe Bearing Packer
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Shop: Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes - 2,200-lb Axles - 4 on 4
- Shop: Trailer 4 on 4 Hub & Drum Assembly - 2,200 lbs. Axles - Hydraulic Brakes
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Search Results: trailer hubs and drums
- Shop: Trailer Wiring
- Shop: Brake Controller
- Search Results: trailer brakes
- Search Results: trailer suspension parts
- Search Results: trailer brake controller
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Replacement Weld on Trailer Jack for a Phoenix Boat
- Q&A: Brake and Hub Compatibility for a 2,000-lb Trailer Axle with L44643 Bearings
- Q&A: Can Brake Drum Be Added To etrailer e37YR 2K Axle With Idler Hubs?
- Q&A: 2003 Coleman Fleetwood Utah Replacement Brake Assemblies and Bearings
- Q&A: Adding Electric Trailer Brakes to 2009 Jayco Jay Series
- Q&A: Replacement Brake Assemblies, Bearings, Seal and Hub for 2002 Coleman Fleetwood Pop Up
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)


