Bolt Spacing of Dexter 7 Inch Brake Drum/Brake Assembly
Updated 04/24/2021 | Published 04/23/2021 >
Products Featured in This Question
Question:
What is the measurement on the 4 bolt pattern stud to stud
asked by: TRAVISJENKINS
0
Expert Reply:
If you're speaking of the wheel bolt pattern for the # 8-276-5 Dexter 2200 Brake Hub/Drum, it uses a 4 on 4 bolt pattern. If you're speaking of the # 23-398-399 brake assemblies you'd looked at, the wheel studs are 2-7/8 inches apart, center to center. I've provided a photo showing this.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Trailer 4 on 4 Hub & Drum Assembly - 2,200 lbs. Axles - Hydraulic Brakes
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L44649 / L44649
- Standard Grade
- For 2200 lbs Axles
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: What is the Best Surge Brake Actuator to Replace My Old Atwood Brake Actuator AT82543?
- Q&A: Correct Replacement Brakes and Hub/Drum Assembly for '97 Jayco Popup
- Q&A: Looking for Replacement 7 inch Actuating Arm for Brake Assemblies
- Q&A: Hubs and Brakes for 2k Axle
- Q&A: Electric Brakes for 2001 Jayco Eagle 12 SO Pop-Up Camper
- Q&A: Adding Electric Trailer Brakes to 2009 Jayco Jay Series
- Q&A: How To Find Correct Replacement Axle for Coleman Fleetwood Popup
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Electric Trailer Brakes: How They Work & What to Buy


