Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Corrosion-resistant cover bolts onto the rear of your Dexter Model 60 actuator to protect the electric reverse lockout valve.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Titan zinc-plated solenoid shield for the Titan model 60 trailer-brake actuators. This is a nice corrosion-resistant cover that'll bolt on to the rear of your Titan model 60 actuator, to protect the electric reverse lockout valve. The zinc plating will help resist corrosion. Just to show you where this will attach, I happened to pull a Titan model 60 actuator. You can see this one already has the solenoid valve attached to it. Basically you can see it ...
now this one I've added to it, it didn't come with the solenoid vale, but I just added it. You want to protect it so nobody steps on it or breaks it. All you have to do is remove the 2 screws right here, and then remove this cover that comes on the actuator. Then this solenoid shield, basically what you will do is you will need to remove the 2 screws up on the top here. Just bolt those 2 on there, then you just bend it down till those 2 screws line up. Once you have that, that'll give you protection of the solenoid valve so it doesn't get damaged.
It's well worth adding this onto if you have a solenoid valve at the back of your actuator. That should do it for the review on the Titan zinc-plated solenoid shield for the Titan model 60 brake actuators.
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
Ratings & Reviews

Roger O.
7/22/2017
Perfect

Joseph
1/14/2022
After a season of use, it is still in great shape.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Len E.
8/8/2019
Had to add another plate to protect the oil line from being hit/bent when getting on and off the boat. Part of the reason is that the new brake master cylinder was longer and I had to add a new line that required a large bend radius to get it to fit with the current brake line from the trailer.