Orientation of Roller Assemblies when Reassembling Titan Model 60 Brake Actuator
Updated 12/20/2013 | Published 12/19/2013
Question:
I received my parts from you today for my titan 60, thank you very much. the rollers that are on either side of the shock absorber i got from you, have a chamfer on one side, which way do the chamfers face, toward the shock absorber or toward the outside of the tongue? thank you
asked by: Richard R
0
Expert Reply:
When assembling the roller assembly, the rollers should be installed so that the beveled edges face the outside of the tongue, away from the shock absorber. I have confirmed this with my contact in the Technical Services department at Titan.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Solenoid Shield for Dexter Model 60 Trailer Brake Actuators - Zinc
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Solenoid
- Shield
- Dexter
more information >
Continue Researching
- Video: Let’s Check Out the Replacement Master Cylinder Assembly for Dexter Model 6 Brake Actuators
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Article: How to Bleed Your Trailer Surge Brakes
- Video: In-Depth Review of the Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Shop: Replacement Master Cylinder Assembly for Dexter Model 6 Brake Actuators - Drum
- Search Results: titan master cylinder
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Solenoid Shield for Dexter Model 60 Trailer Brake Actuators - Zinc
- Q&A: How the Shock Absorber Works on a Surge Brake Actuator
- Q&A: Replacement Master Cylinder for Titan Model 10 Actuator
- Q&A: Roller Placement on Shocks for a Titan Model 10 Brake Actuator
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Shop: Kenda Karrier ST205/75R15 Trailer Tire with Black Mod Wheel - 5 on 4-1/2
- Search Results: master cylinder cap
- Search Results: hitch lock pin
- Search Results: trailer lock
- Search Results: pin lock
- Q&A: Replacement Bearings for Dexter 5,200 lb Axles
- Q&A: Reverse Lockout Solenoid For Dexter DX12.5 Actuator
- Q&A: Looking For A Replacement Actuator For My Titan 10 Surg-O-Matic
- Q&A: Lug Nuts and Wheel Center Cap for Aluminum Condor Trailer Wheel
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision