Parts Needed To Convert Titan Model 60 Drum Brake Actuator To Work On Disc Brakes

Updated 03/02/2022 | Published 03/01/2022

Products Featured in This Question

Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs

(173)

$327.00

Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs

(88)

$1064.89

Dexter Zinc-Plated Brake Actuator - Disc - Multi-Fit Ball - Bolt On - 7,000 lbs

(27)

$282.87

Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts

(266)

$77.10

Replacement Master Cylinder Assembly for Dexter Model 60 Brake Actuators - Disc

(79)

$138.45

Solenoid Shield for Dexter Model 60 Trailer Brake Actuators - Zinc

(53)

$15.25

Question:

What do I need to convert a titan 60 boat trailer drum surge brake to a disk brake. Does this change help with rusting brakes?

asked by: Charles

Helpful Expert Reply:

To convert your Titan Zinc-Plated Brake Actuator - Drum # T43397007K to Disc # T47457007K you will need to change out the Master Cylinder Assembly # T4820000.

If you do not already have a Reverse Lockout Solenoid # T4748800 you will want to add that as well since there are no free backing disc trailer brakes. A Solenoid Shield # T4835800183 will protect the solenoid if you do not have one.

Using a disc brake kit like the Kodiak # K2R35S will reduce rusting as the rotors and calipers are stainless steel. If you can provide me with the axle information on your boat trailer I can recommend a kit for you.